Catalyst / Bypass

Exhaust Catalytic Converter 200Cells Race X-Pipes with LARGE BORE 63mm diameter tubing pipes



DesignTek sports racing catalytic converters give a HORSEPOWER and TORQUE gain to all 996 cars. High Quality T304 SS C.N.C. mandrel bent tubing for maximum exhaust flow.

The X-Pipe design has increased deeper sound with increased BHP. German imported 200 cell high-flow sport catalytic converters for reduced backpressure and less restriction.

DesignTek sports racing catalytic converters for less restriction and more power and more sports car sound. Simple bolt-on direct replacement sports cats for the factory OEM Porsche catalytic converters.

PLEASE NOTE THESE CATS MAY REQUIRE A REMAP TO ENSURE NO DASHBOARD LIGHTS - Please contact your local tuning shop to have this done!

Fits:
Porsche 996 Carrera 3.4L / 3.6L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109963

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Bypass Pipes  (SET OF 2 Left & Right)

  

The DesignTek® Evolution range of products are premium manufactured performance exhaust systems built with exceptional technology. The products are dyno tested with proven Hp gains built to rigorous TÜV and ISO 9001 quality certification standards.

DesignTek® Evolution exhausts are built for the "tuners market" high performance modified vehicles. With over 50 years of experience the products are built to the highest technical level by the manufacturing team behind the DesignTek® Evolution range.

This product may trip the engine check light, you will need to either re-map the vehicle so that it is reading the lambda sensors correctly, or fit some extra lambda sensor extensions our part number 00060612300, the product has holes for the lambda sensors. The cat bypass will increase the power delivery also give the car a deeper sporty sound.

Details:
- More power and sportscar sound.
- More power upto +10hp.
- Saves 30lbs 15 KG from rear of your 996.

*A re-map to the ECU may require when fitting these cats.

Fits
Porsche 996 Carrera 3.4L
Porsche 996 Carrera 3.6L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606209961

The product you are viewing cross references to these numbers

Exhaust Sports 200 Cell Catalytic Converter Pipes.  (SET OF 2 Left & Right)



DesignTek Sport 200 Cell catalytic converters 996 Sport Cats Give a gain of +12 to 15BHP.
Made from high grade stainless steel.

Only for cars with pre & after sensors. Some USA spec cars may require sensor point modification to fit.

The item can be used on vehicles equipped with only a pre sensor. The post sensor hole can simply be blanked off during installation. Since vehicles with only a pre sensor are generally less sensitive than those with dual sensors, this setup is acceptable. Blanking the unused hole is a common and effective method to ensure a proper fit for this product on pre-sensor-only vehicles.

Fits:
Porsche 996 Carrera 3.4L / 3.6L

A Voucher for £100 available when you buy this product. For more information  CLICK HERE

Please note: These sport cats will make your car sound louder than with stock cats. If you have, or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109961

The product you are viewing cross references to these numbers

Exhaust sleeve catalytic converter to silencer.
Connecting sleeve from cat to rear silencer.
Price is for each sleeve.



Fits:
Porsche 996 1998-05 (not Turbo and GT2)

Porsche 997 2005>> (not Turbo and GT2)

Porsche 991 Carrera C2 3.4L (350Bhp)
Porsche 991 Carrera C2S 3.8L (400Bhp)
Porsche 991 Carrera C4 3.4L (350Bhp)
Porsche 991 Carrera C4S 3.8L (400Bhp)
   Fits cars with and without sport exhaust

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711152000

The product you are viewing cross references to these numbers

Titanium (grade 5) Exhaust sleeve catalytic converter to silencer.
Connecting sleeve from cat to rear silencer. Price is for each sleeve.



Fits:
Porsche 996 1998-05 (not Turbo and GT2)
Porsche 997 2005>> (not Turbo and GT2)
Porsche 991 Carrera C2 3.4L (350Bhp)
Porsche 991 Carrera C2S 3.8L (400Bhp)
Porsche 991 Carrera C4 3.4L (350Bhp)
Porsche 991 Carrera C4S 3.8L (400Bhp)

Fits cars with and without sport exhaust
Grade 5 titanium is resistant to salt water and variety of corrosive media temperatures below 300°C

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711152000

The product you are viewing cross references to these numbers

Exhaust Sport Catalytic Converter Pipes. Polished Stainless steel.



Fits:
Porsche 996 3.6L 2001-05 (not Turbo and GT2)

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996PO96270S

The product you are viewing cross references to these numbers

Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.


Fits:
Many Porsche vehicles. Universal kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

100390100392

The product you are viewing cross references to these numbers