Powerflex Black Series Bushes

Powerflex Black series Anti Roll Bar Bush Rear
Sold as a pair

Size: 20mm

OEM Part Number: 99633379225



Fits:
Please choose by size
Porsche 997 inc. Turbo
Porsche 996 1997-2005
Porsche 986 Boxster 1997-2004
Porsche 987 Boxster 2005-2012
Porsche 987C Cayman 2005-2012

Click 'Zoom in' for large parts diagram.
Diagram ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-510-20BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Control Arm Bush Rear.



Replacement motorsport rear control arm polyurethane bushes. fits Control arms 99633104506/08/10/12 & 99733104504

Set of 2 for two lower rear control arms
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 986 Boxster 1994-04
Porsche 996 1998-04 (not Turbo)
Porsche 997 2005>> (not Turbo)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-507BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Front anti roll bar bush 23.5mm.
Sold as a pair

OEM Part Number: 99634379212

Note: Please check anti roll bar diameter before ordering.



Fits:
Porsche 986 Boxster 2.5L 1997-99 *M030 FRONT
Porsche 986 Boxster 2.7L 2000>> *M030 FRONT
Porsche 986 Boxster S 3.2L 2000>> **I029 FRONT

Porsche 987 Boxster 2.7L 2005-08 TIPTRONIC **I029 FRONT

Porsche 996 Carrera 1998-05 C2 COUPE TIPTRONIC FRONT
Porsche 996 Carrera 1998-05 C2 COUPE *M030 FRONT
Porsche 996 Carrera 1998-05 CABRIO FRONT
Porsche 996 Carrera 1998-05 TARGA MANUAL FRONT
Porsche 996 Carrera 1998-05 C4 *M030 FRONT
Porsche 996 Carrera 2001-05 C4S FRONT
Porsche 996 Turbo 2001-05 Standard Chassis FRONT

Porsche 997 MKI Carrera 2005-08 C2 MANUAL **I029 FRONT
Porsche 997 MKI Carrera 2005-08 C4 WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 C4S WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 TARGA WITH PASM FRONT
Porsche 997 MKI Turbo 2008-09 FRONT

* M030 - Cars with Sport-type chassis
** I029 - Cars with Standard chassis


Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-501-23.5BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Front Anti roll bar bush 24mm.



Please check anti-roll bar diameter before ordering.
OEM Part Number: Bush = 99634379217
OEM Part Number: Bar = 996 343 701 20 / 996 343 701 24
OEM Part Number: Bar = 996 343 701 10 / 996 343 701 23

Fits:
Porsche 986 Boxster S 3.2L 2000>> Cars with Sport-type chassis
Porsche 987.1 Boxster 2005-08 Cars with standard chassis and Manual Transmission
Porsche 987.1 Boxster / S 2005-08 Cars with PASM (electronic damper control)
Porsche 987.2 Boxster 2009-12
Porsche 987C.1 Cayman 2005-08
Porsche 987C.2 Cayman 2009-12
Porsche 996 TARGA 2002>> Cars with Sport-type Chassis (M030) and Tiptronic Transmission (M249)
Porsche 997.1 C2 CABRIO / COUPE 2005-08 Cars with Standard Chassis (I029) and 6-speed manual transmission (I480)
Porsche 997.1 C2S COUPE 2005-08 Cars with Sport-type Chassis (I030)
Porsche 997.1 C2/C2S COUPE / CABRIO 2005-08 Cars with PASM (electronic damper control) (I475)
Porsche 997.2 C2 COUPE / CABRIO 2009-12 Cars with Standard Chassis (I029) and PDK Transmission (I250)
Porsche 997.2 C2/C2S COUPE 2009-12 Cars with Sport-Type Chassis (I030)
Porsche 997.2 C2/C2S COUPE/CABRIO 2009-12 Cars with PASM (electronic damper control) (I475)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-501-24BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Front Track control arm caster offset outer bush uses our usual 95A shore material combined with an offset bore sleeve to allow up to 0.4° of Caster increase from OE, allowing for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain.

Sold as a pair (both arms)

OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Fits:
Fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802G.

Diagram ref no 2

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502GBLK

The product you are viewing cross references to these numbers

Powerflex Black Series Gearbox Front Mounting Bush Insert Kit.
Fits 996 & 997 vehicles with the twin mounting bracket (Replacement for Porsche parts number 99737503303) at the end of the gearbox.

Fits:
Porsche 996 / 997 all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3

POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. 
They are designed for the Track, ready to Race and are engineered to be the best.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-531BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Gearbox Front Mounting Bush Insert Kit. For vehicles with a single gearbox bush in the end casing.
Replacement for Porsche parts No. 99637505505.

Fits:
Porsche 996 3.4 & 3.6 Manual models except for Turbo GT2 & GT3 models

POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-530BLK

The product you are viewing cross references to these numbers

Powerflex Black Series PFF57-502BLK
Replacement motorsport lower arm centre polyurethane bushes.



Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for TWO lower arms which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.

Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for TWO lower arms which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.

SET OF 2 for TWO lower arms front & back
Please note these parts should be fitted by an engineer.

Diagram ref: 
no. 2 - front  /  no. 5 - rear

OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Lower Arm Rear Bush

Replacement motorsport lower arm rear polyurethane bushes.

Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for TWO lower arms which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.

Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for TWO lower arms which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.

Set of 2 for TWO lower arms front & back
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-503BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Rear Sub Frame Bush Front.



Replacement motorsport rear sub frame FRONT polyurethane bushes.

Fits:
Porsche 996 1997-05 all models
Not suitable for GT2 and GT3 models.

Set of 2 for two sub frames rear left & right
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-512BLK

The product you are viewing cross references to these numbers

Powerflex Black Series rear upper link arm INNER bush.
Sold as 4 bushes (4 x upper link arms)

PFR57-1509 fits 19.5mm width arms, for 22mm width arms please use PFR57-509.
OEM Part Number: 99633104703

Size:
19.5mm

Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3
Porsche 997 MKI 2006-2009
Porsche 997 TURBO/GT3

POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. 
They are designed for the Track, ready to Race and are engineered to be the best.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-1509BLK

The product you are viewing cross references to these numbers

Powerflex Black Series rear upper link arm OUTER bush.
Sold as 4 bushes (4 x upper link arms)

Size: 19.5mm



PFR57-1508 fits 19.5mm width arms, for 22mm width arms please use PFR57-508.

OEM Part Number: 99633104703

Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3
Porsche 997 MKI 2006-2009
Porsche 997 TURBO/GT3

Replacing your rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-1508BLK

The product you are viewing cross references to these numbers

Powerflex Black series Stabilizer Bar Bush Rear
Sold as a pair

Size: 21mm

OEM Part Number: 99633379226



Fits:
Porsche 996 C2/C4/C4S - Please choose by size
Porsche 996 GT2
Porsche 997 C2/C2S/C4/C4S MKI - Please choose by size

Click 'Zoom in' for large parts diagram.
Diagram ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-510-21BLK

The product you are viewing cross references to these numbers

Powerflex Black series Stabilizer Bar Bush Rear
Sold as a pair

Size: 22mm - For Motorsport Use



Fits:
Porsche 996 C2/C4/C4S - Please choose by size
Porsche 996 GT2

Click 'Zoom in' for large parts diagram.
Diagram ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-510-22BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Rear Sub Frame Bush Front.



Replacement motorsport rear sub frame FRONT polyurethane bushes.

Fits:
Porsche 996 1997-05 all models
Not suitable for GT2 and GT3 models.

Set of 2 for two sub frames rear left & right
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-511BLK

The product you are viewing cross references to these numbers

Track Control Arm and Bush Kit Adjustable uses our Black 95A material for both bushes for ultimate performance and is supplied with an offset outer sleeve and CNC machined inner sleeve with spanner to allow for on-car adjustment of both caster and camber, for quick and easy optimisation of your wheel alignment.

PACK OF 2

This arm features suspension geometry tuning, with a caster increase of up to 0.4° and camber adjustment of +/- 0.75°

OEM Part Number: 98133105301
OEM Part Number: 99733104180
OEM Part Number: 99634105318



We're excited to introduce our new range of complete replacement Track Control Arm and Bush Kits for a number of Porsche models including 911 996, 997, 991, and Boxster / Cayman 718, 981, 986, 987.

Fits:
FRONT Diagram reference 2F
Porsche 997 GT2, GT3 & GT3RS
Porsche 986 Boxster (1997-2004)
Porsche 996 (1997-2005)

REAR Diagram reference 5R
Porsche 997 GT2, GT3 & GT3RS
Porsche 997 inc. Turbo
Porsche 718 Boxster/Cayman
Porsche 981 Boxster/Cayman
Porsche 986 Boxster (1997-2004)
Porsche 987 Boxster (2005-2012)
Porsche 987C Cayman (2005 - 2012)
Porsche 996 (1997-2005)


CONTENTS (parts per pack):

2 x Short Adjustable Stainless Steel Sleeves
1 x C45 Spanner
2 x Stainless Steel Washers

Pre-assembled parts:
2 x Cast Aluminium Track Control Arms
2 x Outer Bushes
2 x Inner Bushes
2 x Long Adjustable Stainless Steel Sleeves
2 x Ball Joint Nuts

Partnering with Chassis Technology Europe (CTE), a specialist in the manufacture of suspension and steering parts, we can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a 'fit and forget' product, designed specifically for high performance and convenience of use with the added peace of mind of our Lifetime Warranty *.

Simply remove the old arm and refit!

Both Adjustable and Non-Adjustable bush options are available to suit differing driving and performance requirements.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PF57K-1001G

The product you are viewing cross references to these numbers