Powerflex Heritage Collection

Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 20mm bushes deliver enhanced handling, improved performance, and greater durability.




Porsche 964 Carrera 1989-94 - Without Sports Suspension (PR 030)
Porsche 993 Carrera 4S 1996-98

Diagram ref. 3.

These bushes are a direct replacement for the following Porsche part numbers: 96434379212, 96434379217, and 96434379220. 

NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.

The Powerflex Range:

Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Powerflex Materials:

The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.

Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.

Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-601-20H

The product you are viewing cross references to these numbers

Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 21mm bushes deliver enhanced handling, improved performance, and greater durability.




Porsche 964 Carrera - With PR 491 (Turbo Look)
Porsche 964 Turbo 1991-94
Porsche 993 Carrera - Excludes C4S & Models With Sports Suspension (PR 030)

Diagram ref. 3.

These bushes are a direct replacement for the following Porsche part numbers: 96434379221 

NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.

The Powerflex Range:

Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Powerflex Materials:

The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.

Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.

Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-601-21H

The product you are viewing cross references to these numbers

Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 22mm bushes deliver enhanced handling, improved performance, and greater durability.




Porsche 964 Carrera 1989-94 - With Sports Suspension (PR 030)
Porsche 993 Carrera 1996-98 - With Sports Suspension (PR 030)
Porsche 993 Turbo 1995-98

Diagram ref. 3.

These bushes are a direct replacement for the following Porsche part numbers: 96434379222

NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.

The Powerflex Range:

Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Powerflex Materials:

The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.

Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.

Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-601-22H

The product you are viewing cross references to these numbers

With no replacement bushes available from Porsche, these uprated Powerflex bushes provide a high-performance, durable, and cost-effective alternative to purchasing a complete arm. 

Fits:
Porsche 993 Carrera 1994-98
Porsche 993 Carrera RS 1995-96
Porsche 993 Turbo 1995-98
Porsche 993 GT2 1996-98

Powerflex diagram ref. 13.

Sold as a set of two, these bushes are a direct replacement for the inner bush on part number 99333104301 - the rearmost control arm on the rear axle, which manages toe angle adjustment.

The Powerflex Range:

Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Powerflex Materials:

The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.

Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.

Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-913H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)



This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-920H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Rear Upper Front Arm Inner Bush.
Sold as a pair (both arms)



This part replaces OEM part number: 99333104502.

Fits:
Porsche 993 1993-95

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-910H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Rear Upper Rear Arm Inner Bush.
Sold as a pair (both arms)



This part replaces OEM part number: 99333104700.

Fits:
Porsche 993 1993-95

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-911H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Stabilizer Bar Bushes Rear POLYURETHANE
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313B



Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.

Pack of 2. Two bushes per car


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-18H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Stabilizer Bar Bushes Rear POLYURETHANE
Size: 20mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313C



Fits:
Porsche 911 SC 1974-83 Front axle
Porsche 911 TURBO 1985-88 Rear axle
Porsche 924 1976-77 Front axle
Porsche 924S 1986-88 Rear axle Cars with Sport Suspension
Porsche 944 1982-85 Front axle
Porsche 944 1985-88 Rear axle - Please choose by size
Porsche 964 1991-94 C2/C4 Rear axle Cars with manual transmission - Please choose by size
Porsche 993 C2S/C4S/RS Rear axle Cars with Sport Suspension - Please choose by size


Click 'Zoom in' to see pats diagram.
Diagram Ref No 17.

Pack of 2. Two bushes per car.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-20H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Stabilizer Bar Bushes Rear POLYURETHANE
Size: 21mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313D - 477411313M



Fits:
Porsche 911 1986-89 REAR AXLE
Porsche 964 C2 1989-94 REAR AXLE - Please choose by size
Porsche 993 Turbo REAR AXLE

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.

Pack of 2. Two bushes per car.

Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-21H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Transmission Mount Bracket Bush. This is a replacement bush for the original bush. For an insert only please use PFR57-127.
Replacement for OE Porsche part: 96437507003, 96437507004



This bush fits the following RWD vehicles:
Porsche 964 C2 1992-1994 Triptronic - Transmission type A50.02/A50.03
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21/G50.32/G50.33
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05

Click 'Zoom in' for large parts diagram.
Fits to no 16 on diagram.

Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-124H

The product you are viewing cross references to these numbers

POWERFLEX Heritage Collection Transmission mount bracket small bush.
Replacement for OE Porsche part: 96437521101
Diagram Position: 21



This bush fits the following RWD vehicles:
Porsche 964 C2 1990-1994 Manual - Transmission type G50.03 / G50.04 / G50.05
Porsche 964 Turbo 1991-1992 Manual - Transmission type G50.52
Porsche 964 C2 1992-1994 Tiptronic - Transmission type A50.02 / A50.0
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20 / G51.21
Porsche 993 Carrera RS 1995 Manual - Transmission type G50.31 / G50.32 / G50.33
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04 / A50.05.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-121H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Transmission Mount Large Bush Insert. This is an insert to fit into and fill the voids in the original bush OE number: 99337521900 in bracket assembly OE number: 96437502301 found on AWD vehicles.

For a replacement bush please use PFR57-122.



This part fits the following vehicles:
Porsche 993 C4/C4S 1995-1998 Manual - Transmission type G64.20/G64.21
Porsche 993 Turbo 1995-1998 Manual - Transmission type G64.51/G64.52
Porsche 964 C4 1990-1994 Manual - Transmission type G64.00/01/02

OEM Part Number: 99337521900
OEM Part Number: 99337502300
OEM Part Number: 96437502301

Click 'Zoom in' for large parts diagram.
Fits to no 1 on diagram.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-123H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Transmission mount large bush insert. This is an insert to fit into the original bush.
OEM Part Number: 96437505502
OEM Part Number: 96437505580

For a complete bush please use PFR57-125.



This bush fits the following RWD vehicles:
Porsche 964 C2 1990-1994 Manual - Transmission type G50.03/G50.04/G50.05)
Porsche 964 Turbo 1991-1992 Manual - Transmission type G50.52)
Porsche 964 C2 1992-1994 Tiptronic - Transmission type A50.02/A50.03
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05

Click 'Zoom in' for large parts diagram.
Fits to number 23 on diagram.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-126H

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Transmission Mount Large Bush.
This part includes an optional support washer with a built in insert to fit into the voided bush for quick and easy tuning of stiffness levels. This part replaces the original bush OE number: 99337521900 in bracket assembly OE number: 96437502301 found on AWD vehicles.
For an insert only please use PFR57-123.



This part fits the following vehicles:
Porsche 993 C4/C4S 1995-1998 Manual - Transmission type G64.20/G64.21
Porsche 993 Turbo 1995-1998 Manual - Transmission type G64.51/G64.52
Porsche 964 C4 1990-1994 Manual - Transmission type G64.00/01/02

OEM Part Number: 99337521900
OEM Part Number: 99337502300
OEM Part Number: 96437502301

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-122H

The product you are viewing cross references to these numbers

POWERFLEX Heritage Collection Transmission Mount Large Bush. This part includes an optional support washer with a built in insert to fit into the voided bush for quick and easy tuning of stiffness levels.
For an insert only please use PFR57-126.

Replacement for OE Porsche part: 96437505502, 96437505580,



This bush fits the following RWD vehicles:
Porsche 964 C2 1990-1994 Manual - Transmission type G50.03/G50.04/G50.05)
Porsche 964 Turbo 1991-1992 Manual - Transmission type G50.52)
Porsche 964 C2 1992-1994 Tiptronic - Transmission type A50.02/A50.03
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-125H

The product you are viewing cross references to these numbers