Sport & Track Seats

3D-printed Bucket seat centre panel.
Please note: Only available for vehicles with full-bucket seats and only for the driver's seat.



Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

The 3D printed bodyform full-bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing.

As a visual highlight, the visible grille elements on the cushion and backrest are available separately in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044779

The product you are viewing cross references to these numbers

Dry carbon fiber bucket seat, with fabric center cushions in black and white Pepita pattern.
Upgrade your Porsche interior with the WEISSACH RS style dry carbon fiber bucket seat – engineered for lightweight performance, safety, and OEM-level fitment. Designed to deliver the perfect balance of race-inspired support and everyday comfort, these seats are ideal for both track enthusiasts and daily drivers.  

Fits:
Porsche 991 
Porsche 992

•  Constructed from high-quality dry carbon fiber
•  Fabric center cushions with Black and white Pepita pattern
•  Electric height adjustment and manual fore-aft movement
•  Integrated side airbags for enhanced safety
•  Custom colors and upholstery options available on request
•  OEM fitment with no modifications required

SilverRocket LWB Seat Angle Adjuster – Ergonomic Precision and Track-Ready Comfort for Porsche Models with LWB Seats
Sold per seat
The SilverRocket LWB Seat Angle Adjuster is a premium upgrade designed to improve comfort, ergonomics, and driver performance in Porsche 992.1 models equipped with lightweight bucket (LWB) seats. Developed with motorsport engineering precision, this adjuster subtly increases the seat’s rearward tilt to eliminate the overly upright posture common in standard setups — a position that can cause neck strain and fatigue, especially when wearing a helmet during extended drives or track sessions.

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2S 3.0L 2019-24
• Porsche 992.1 Carrera 4S 3.0L 2019-24
• Porsche 992.1 Speedster 4.0L 2019-24
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
• Porsche 992.1 GT3 RS 4.0L 2022-24
• Porsche 992.1 (911) Sport Classic 3.8L 2023
• Porsche 992.1 (911) Dakar 3.0L 2023-24

By refining the seat’s incline, the SilverRocket Adjuster enhances both driving comfort and control, allowing for a more natural seating position that optimises visibility, headroom, and steering alignment.

What Does the SilverRocket LWB Seat Angle Adjuster Do?

The adjuster redefines how you sit behind the wheel. It fine-tunes the angle of the LWB bucket seat, transforming it from a static racing position into a performance-ergonomic configuration that’s equally suited to spirited driving and long-distance touring.

Core Functions:

• Enhances backward tilt for a more relaxed, natural seating posture.
  
• Increases helmet clearance, improving comfort during track driving.
  
• Reduces neck and back strain by correcting overly upright seat geometry.
  
• Improves overall ergonomics and body alignment for better driver endurance.

When paired with the SilverRocket 3D Bucket Seat Insert, the seat achieves a comfort level comparable to Porsche’s premium comfort seats — without sacrificing track-day performance.

Why Do Standard Seat Mounts Cause Issues?

While Porsche’s LWB seats deliver exceptional lateral support, their fixed angle can create ergonomic challenges during long drives or helmeted track use. Common issues include:

• Excessively upright posture, causing discomfort over time.
  
• Limited helmet clearance, forcing the head forward under load.
  
• Increased fatigue, reducing driver focus and control.
  
• Inflexible seat geometry, offering no adjustability for different driver builds.

The SilverRocket LWB Seat Angle Adjuster solves these problems through precision-machined titanium engineering that allows for a more adaptive, performance-oriented seating position.

Why Upgrade to SilverRocket’s TC-4 Titanium Seat Adjuster?

Unlike conventional aluminum spacers or steel brackets, the SilverRocket Seat Adjuster is crafted from aerospace-grade TC-4 titanium — 10x stronger than aluminum — to ensure unmatched structural integrity and safety under track conditions.

Key Benefits:
Enhanced seating posture for both high-performance and comfort driving.
Track-ready strength, exceeding manufacturer specifications for load and stress resistance.
Proprietary Anti-Scratch Stopper, eliminating the risk of seat rail damage.
Minimally invasive design, preserving the original seat slider mechanism and full adjustability.
Sleek electroplated black nickel finish, complementing Porsche’s interior styling.
Weight-efficient construction, maintaining optimal balance and safety compliance.

This combination of comfort, safety, and craftsmanship makes the SilverRocket Seat Adjuster the most advanced ergonomic upgrade available for Porsche 992.1 models with LWB seats

Highlights:

• Improved rear seat tilt for a natural, ergonomic posture.
  
• Enhanced comfort comparable to Porsche’s comfort seats when paired with SR 3D inserts.
  
• Aerospace-grade TC-4 titanium construction, 10x stronger than aluminum.
  
• Proprietary Anti-Scratch Stopper, preventing seat rail damage.
  
• Maintains full slider functionality, with a minimally invasive installation.
  
• Electroplated black nickel finish for a premium aesthetic.
  
• Optimised for helmet use, reducing strain during track sessions.       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT881105BY

The product you are viewing cross references to these numbers

Grille elements for 3D-printed Bucket seat centre panel.
3-parts

"Grille elements in Black, 9820447898YR"

"Grille elements in Guards Red, 98204478984A"

"Grille elements in Racing Yellow, 9820447891S1"

Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044789

The product you are viewing cross references to these numbers

Seat cover and softer foam set.
Porsche 918 fixed carbon bucket seats

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (softer than the factory originals) covered in your desired material and fitting is straightforward.

Some found the factory original foams too hard so we have developed replacement foam sets slightly softer than the factory originals for a more comfortable ride, but still with all the factory details.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

• Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
• Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC

The product you are viewing cross references to these numbers

Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

• Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
• Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC

The product you are viewing cross references to these numbers

Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

• Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
• Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC

The product you are viewing cross references to these numbers

Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

• Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
• Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC

The product you are viewing cross references to these numbers

Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

• Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
• Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC

The product you are viewing cross references to these numbers

Seat cover and standard foam set. Porsche 918 fixed carbon bucket seats

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.

The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat cover and standard foam set for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMCVR

The product you are viewing cross references to these numbers

Side bolster protector covers. Porsche 918 fixed bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, it can be a physical challenge climbing in and out, leading to visible scuffing, deep creases in the leather trim and torn stitching.

Here is a solution in the form of its 918 seat bolster protectors.

Once installed over the outside bolsters of both seats, this new-to-market product perfectly replicates the look of the standard bolster due to being made from Porsche factory black Napa leather and deviated stitching in the colour of your choice.
Along with the additional 'cuff cover', these protectors will also shield the rear of the bolster without looking out of place and installation is easy.
Please Note Protector "Cuff" does not have deviated stitching

Sold as a pair - Left and Right seat

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918BOLSTERCVR

The product you are viewing cross references to these numbers