Wishbones & bushes

Adjustable caster bushing kit.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Caster Tuning
Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms (GT3 control arms or eccentric monoballs) to correct for un-intended caster change that is caused by the extended arms.

Caster is also a great tuning aid for adjusting out understeer. Our Caster Adjusters let you tune the caster you need.

Two eccentric mounting points increase range of adjustment by up to 25mm. Choose from the inner bore for minor caster adjustments or the outer bore for extreme adjustments.

Rear Weight Bias
For the rear suspension, our Caster Adjuster can reduce rear overhang and rear weight bias. Cars with aggressive rear camber actually draw the wheels forward, increasing rear weight bias. Use our Caster Adjuster to compensate and even over-compensate for less rear weight bias than stock

Maintain Proper Alignment
Our Caster Adjuster is solid aluminum to hold alignment settings precisely. Stock rubber bushings compress under load, allowing alignment to wander and making the car less predictable. Our solid design eliminates compression, improves precision and maintains geometry true.

Functional Design Built To Last
Available for factory type lower control arms (wishbones) front and rear, including stock type arms and GT3 arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180011

The product you are viewing cross references to these numbers

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180001

The product you are viewing cross references to these numbers

Hexagon bolt for rear wishbone.
M12 x 1,5 x 105. Sold each.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017-19
Porsche 991 Turbo 2014-20 
Porsche 992.1 Carrera 2019>>
Porsche 992 Turbo 2020>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 17



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF008674

The product you are viewing cross references to these numbers

Hexagon head bolt M12 x 1,5 x 90mm
Sold each - Used in various locations



Fits:
Porsche 981 Boxster / Cayman - 2012 to 2016
Porsche 718 Boxster / Cayman - 2017 Onwards
Porsche 991.1 / Porsche 991.2 - 2012 to 2019
Porsche 992 - 2019 to 2024
Porsche 970.1 / 970.2 Panamera - 2009 to 2016 

Porsche 981 / 718 / 991 / 992 - Used for lower control arm mounting
Porsche 970 Panamera - Used for steering rack mounting and rear differential mounting

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A700820900

The product you are viewing cross references to these numbers

Litronic Bracket for adjustable control arms.



Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights

Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180009

The product you are viewing cross references to these numbers

Litronic Bracket for adjustable control arms.



Fits
Porsche 987 - Rear with Litronic headlights
Porsche 981 - Rear with Litronic headlights

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

218002

The product you are viewing cross references to these numbers

Lower wishbone central bushing removal and installation tool.

1 x tool required



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Simplify the installation process of Monoball products and replacement bushings.

Our two piece cup and piston tools allow for simple bushing extraction and insertion without removal of the wheel carriers or control arms. No need to use a shop press. The tools are designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.

We have tools for the LCA central bushings, the rear upright LCA bushings, and the rear upright shock mount bushings.

Front and rear control arms on the 996, 997, 986, 987, & 981
Front Lower Control Arm only on 991

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260019

The product you are viewing cross references to these numbers

Lower rear wishbone. 

Sold individually; fits left or right side. 


Porsche 991 Carrera 2012-19
Porsche 991 Turbo 2014-20 - Excludes GT2

Porsche 992-1 Carrera 2019-24
Porsche 992-1 Turbo 2020>>

Diagram ref. 1. 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505311

The product you are viewing cross references to these numbers

Elevate your Porsche’s performance with our high-quality monoball kit, designed for precision, durability, and ease of installation.

1 kit required per vehicle - includes 4 monoball bearings (two for each lower control arm).




Porsche 991 Carrera 2/4/GTS 2012-19
Porsche 991 Turbo 2014-20 

Features:

Spherical Bearings for Ultimate Precision - Replace factory rubber bushings with hardened-steel spherical bearings for free motion on multiple axes. This eliminates deflection commonly seen with rubber bushings, ensuring precise toe and camber alignment.

Machined for a Perfect Fit - High-tolerance housing allows for a simple press-fit installation, with correct spacers for accurate fitment.

Weather Sealed for Durability - Hard-anodized monoball housing and spacers resist wear and corrosion, while proprietary rubber seals protect the precision bearings from road contaminants to extend product life.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260009

The product you are viewing cross references to these numbers

Rear lower wishbone eccentric monoball kit.
1 kit required per car



Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only

Our Eccentric Lower Wishbone Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing rear camber, as needed.

Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.

Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260008

The product you are viewing cross references to these numbers

Rear upright wheel carrier bushing tool.
1 x tool required per application



Fits
Porsche 991 - Rear
Porsche 991 Turbo - Rear

Simplify the installation process of Monoball products and replacement bushings.

Our two piece cup and piston tools allow for simple bushing extraction and insertion without removal of the wheel carriers or control arms. No need to use a shop press. The tools are designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.

We have tools for the LCA central bushings, the rear upright LCA bushings, and the rear upright shock mount bushings.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

226001

The product you are viewing cross references to these numbers

Rear wishbone, Lower.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 991 Turbo / GT2 2014>>
Porsche 992 Carrera - 2019>>
Porsche 992 turbo - 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505311

The product you are viewing cross references to these numbers

Rear wishbone, Lower.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 991 Turbo / GT2 2014>>

Porsche 992 Carrera - 2019>>
Porsche 992 turbo - 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505311

The product you are viewing cross references to these numbers

Rear wishbone, Upper.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 997 Turbo 2014>>
Porsche 991 GT3 2014-17
Porsche 991 GT3 2018>> Cars produced before 31.08.2017

Porsche 992 Turbo / Turbo S

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505397A

The product you are viewing cross references to these numbers

Rear wishbone, Upper.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 997 Turbo 2014>>
Porsche 991 GT3 2014-17
Porsche 991 GT3 2018>> Cars produced before 31.08.2017

Porsche 992 Turbo / Turbo S

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505397A

The product you are viewing cross references to these numbers

Rear wishbone, Upper.

Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 997 Turbo 2014>>
Porsche 991 GT3 2014-17
Porsche 991 GT3 2018>> Cars produced before 31.08.2017

Porsche 992 Turbo / Turbo S

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505397A

The product you are viewing cross references to these numbers