Track Control Arm REAR

Adjustable front caster arms with anti-dive / anti-squat.

1 kit required per car



Fits:
Porsche 981 Boxster - Front Only
Porsche 981 Cayman - Front Only
Porsche 991 - Front Only

Porsche 982 (718) Cayman / Boxster Front Only

You have to exchange the control arm central bush to accommodate the fork arm. (bought separately)


Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front

Front Suspension
Threaded double-adjuster makes it easy to extend or shorten the arm.

This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.

Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.

Fully weather sealed – Proper boots at the heim joint keep water and contaminant out for extended life.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180032

The product you are viewing cross references to these numbers

Pair of adjustable rear lower wishbones.

1 pair required per car



Fits
Porsche 991 2012 Onward - Rear Only

We've developed 991 Rear Adjustable Wishbone to provide the camber and precision you need. Machined from billet aluminum, hard anodized and fully weather sealed, this arms are strong enough for track and durable enough for extended street use.

Easy Camber Adjustment – The double adjuster makes fast and precise camber changes in minutes. Dialing in your race car, or adding camber for the occasional track day is now a simple operation.

Camber Range – Extended range of adjustment lets you get aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Porsche 991 adjustable rear lower wishbone detail

Heim Joint – Eliminate suspension deflection associated with rubber compression. For superior driving precision, spherical bearing type heim joints are used instead of the rubber bushings that are found in OEM control arms. The arms are fully rebuildable with replaceable heim joints.

Fully Weather Sealed – Rubber boot protects the heim joint to keep water and contaminant out for extended life.

The kit includes both rear lower wishbones. Order one kit per car

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180012

The product you are viewing cross references to these numbers

Control arm lower, Rear.



Fits:
Porsche 991.1 2016 >> (Cars produced from week 45 onwards)
Porsche 991.2 2017>>
Porsche 991 Turbo 2016>> (Cars produced from week 45 onwards)

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99133104

The product you are viewing cross references to these numbers

Control arm upper, Rear. Fits left and right side.



Fits:
Porsche 991.1 2012-16
Porsche 991.2 2017>>
Porsche 991 Turbo 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99133106104

The product you are viewing cross references to these numbers

Control arm, Rear, Upper. 



Fits:

Porsche 991.1 2012-16

Porsche 991.2 2017>>

Porsche 991 Turbo 2014>>

Porsche 992 Carrera 2019>>

For cars with Standard rear axle (option code: 0N1)

Porsche 992 Turbo 2020>>
For cars with Standard rear axle (option code: 0N5)

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505237B

The product you are viewing cross references to these numbers

Control arm, Rear, Upper. 



Fits:

Porsche 991.1 2012-16

Porsche 991.2 2017>>

Porsche 991 Turbo 2014>>

Porsche 992 Carrera 2019>>
For cars with Standard rear axle (option code: 0N1)

Porsche 992 Turbo 2020>>
For cars with Standard rear axle (option code: 0N5)

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505237B

The product you are viewing cross references to these numbers

Control arm, Rear, Upper. 

Fits:

Porsche 991.1 2012-16

Porsche 991.2 2017>>

Porsche 991 Turbo 2014>>

Porsche 992 Carrera 2019>>
For cars with Standard rear axle (option code: 0N1)

Porsche 992 Turbo 2020>>
For cars with Standard rear axle (option code: 0N5)

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505237B

The product you are viewing cross references to these numbers

Lower rear wishbone. 

Sold individually; fits left or right side. 


Porsche 991 Carrera 2012-19
Porsche 991 Turbo 2014-20 - Excludes GT2

Porsche 992-1 Carrera 2019-24
Porsche 992-1 Turbo 2020>>

Diagram ref. 1. 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505311

The product you are viewing cross references to these numbers

BBi Autosport rear dogbone arm set.



Fits
991.1 and 991.2 Carrera and Carrera S
991.1 and 991.2 Carrera 4 and Carrera 4S
991.1 and 991.2 GTS
991.1 and 991.2 turbo

Product Description:
The BBi Autosport "Dogbone" Rear arm set upgrades the factory control arms with machined and anodized units designed to house spherical bearings.

The full set replaces the arms with rubber bushings and bring back control, stability and predictability in the suspension - much like the RS models.

These are fully serviceable parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BBIDOGBONE991

The product you are viewing cross references to these numbers

Rear track rod concentric monoballl kit.
1 kit required per car



Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only

Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.

High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.

Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.

These bearings are made to last.

The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260015

The product you are viewing cross references to these numbers

Rear track rod eccentric monoballl kit.
1 kit required per car



Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only

This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.

Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.

Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260013

The product you are viewing cross references to these numbers

Rear track rod suspension arm – the upper arm located closest to the front of the vehicle.

Sold individually; fits left or right side. 

Fits:

Porsche 991-1 Carrera 2012-16
Porsche 991-2 Carrera 2017-19 - Models without rear-axle steering (PR 170) 

Diagram ref. 9.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1501529A

The product you are viewing cross references to these numbers

Rear trailing arm / lower control arm. 


Porsche 991 Carrera 2012-19
Porsche 991 Turbo 2014-20 - Excludes GT2

Porsche 992-1 Carrera 2019-24
Porsche 992-1 Turbo 2020>>

Diagram ref. 21.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P150522

The product you are viewing cross references to these numbers

Track rod rear suspension. 
Sold Each - Fits Left and Right Hand Side, 2 required per car



Fits:
Porsche 991.1 Carrera / Carrera S - 2012 to 2016
Porsche 991.1 Carrera 4 / Carrera 4S - 2012 to 2016
Porsche 991.2 Carrera / Carrera S - 2016 to 2019
Porsche 991.2 Carrera 4 / Carrera 4S - 2016 to 2019

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1501529A

The product you are viewing cross references to these numbers

Track rod rear suspension. 
Sold Each - Fits Left and Right Hand Side, 2 required per car



Fits:
Porsche 991.1 Carrera / Carrera S - 2012 to 2016
Porsche 991.1 Carrera 4 / Carrera 4S - 2012 to 2016
Porsche 991.2 Carrera / Carrera S - 2016 to 2019
Porsche 991.2 Carrera 4 / Carrera 4S - 2016 to 2019

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1501529A

The product you are viewing cross references to these numbers

Rear track rod concentric monoballl kit.
1 kit required per car



Fits
Porsche 991 2012 Onward - Rear Only

These monoball cartridges replace factory rear upper control arm bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.

Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.

The kit includes 8 monoball bearings. 2 per arm, for 4 arms total.
Order one kit per car.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260007

The product you are viewing cross references to these numbers