Blower Motors & Fans

Electric Air Conditioning for Porsche 964 and 993 (two condensers)

The Electrocooler electric air conditioning system for Porsche 964/993 is an update to the original factory A/C system using an electric compressor pump.

• Fits vehicles with or without factory AC

The 964/993 blower unit and fans are retained but everything else is replaced.

All parts are provided except for the factory evaporator, which is available from Porsche
• All Electric. All modern components
• Weighs around 22 lbs (10 kg)
• Fits in front of vehicle
• Lightweight narrow hose set weighing under 4lbs (1.5kg)
• Easy Install. Bolt-in installation
• Clutter Free. Uses the standard fresh air vents to deliver cool air
• Simple to Use. Control by a single 'smart button' or original CCU
• Energy Efficient. Uses less than 1 HP of engine power
• Fits all models of 964 / 993 including RS
• Fits vehicles with or without factory AC

All 964 systems are now shipped with two condensers for increased cooling performance. Check our installation guide HERE for details on second condenser fitment.

Please note! Our electric air conditioning likes a healthy current. We recommend upgrading the original alternator in the vast majority of installations. Porsche 964 and 993 models are less affected but may still benefit.

Engine compartment Air blower motor and fan (without housing). 

Fits:
Porsche 964 1990-94 (Non Turbo)
Porsche 993 1994-98
Porsche 993 Turbo 1994-98

Fits to number 11 on diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99362432801

The product you are viewing cross references to these numbers

Heater / Aircon blower motor. Inside front bulkhead. Left side.

Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96457201501

The product you are viewing cross references to these numbers

Heater / aircon blower motor. Inside front bluk head.

Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Diagram ref no 5.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96457201

The product you are viewing cross references to these numbers

This a replica of the Porsche Germany RS lightweight factory heat duct that was used on all 3.6 liter special RS lightweight rare cars.

The Porsche part is ugly roto-formed cheap plastic with parting lines whereas accurate replica is carbon fiber.

Saves 8 to 9lbs about 4Kg from the rear of all 964's and 993's. Will not work on C2 Turbos/965 cars.

Replaces blower motor assembly and ductwork and still allows plenty of heat just like the factory RS part.

Ultra cool clear coated real carbon fiber tube that really cleans up engine bay and makes working on engine easy.

Simple do it yourself 20 minute installation that gives you the RS style engine look.

All late model 993's 1996-98 require the 964 early type fan shroud (as shown on exploded image)
Can be added below

fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997

To see a video about this product Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964167003

The product you are viewing cross references to these numbers

Outer case housing for engine compartment Fan & Air Blower Motor. 

Fits:
Porsche 964 1990-94 (Non Turbo)
Porsche 993 1994-98
Porsche 993 Turbo 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99362432801

The product you are viewing cross references to these numbers

Air blower motor and fan - in Engine compartment. No more rattling bearings.

Fits:
Porsche 964 1990-94 (Non Turbo)
Porsche 993 1994-98
Porsche 993 Turbo 1994-98

Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99362432801

The product you are viewing cross references to these numbers

Air blower motor and fan - in engine compartment. No more rattling bearings.

Fits:
Porsche 964 1990-94 (Non Turbo)
Porsche 993 1994-98
Porsche 993 Turbo 1994-98

Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99362432801

The product you are viewing cross references to these numbers

Cargraphic’s OEM-style heater pipe and fan/alternator cover directly replaces the original cabin blower and fan unit with a compact, integrated 2-speed fan motor - delivering a cleaner engine bay without sacrificing heating performance.

Fits:
Porsche 964 Carrera 4 1989-94
Porsche 964 Carrera 1990-94
Porsche 964 Targa 4 1990-94
Porsche 964 Targa 1990-94
Porsche 964 Carrera RS 1992-94

Porsche 993 Carrera 1994-97
Porsche 993 Carrera 4 1995-97
Porsche 993 Carrera RS 1995-96
Porsche 993 Targa 1996-1998
Porsche 993 Carrera 4S 1996-98
Porsche 993 Carrera S 1997-98

Features:
- Provides a cleaner, less cluttered appearance in the engine bay.
- Direct replacement for the original heating blower unit.
- Integrated fan motor with 2-speed blower function matching the original, ensuring no loss of heating performance.
- Alternator/fan cover crafted from high-quality visual carbon fibre.
- Endpiece with original-style resistor and temperature sensor.
- Precision manufactured for an optimal fit.  


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CARP64GTHXFAN

The product you are viewing cross references to these numbers

Rennline RS Carbon Fiber heater duct.

Fits:
Porsche 964 / 993 1989 - 1998 EXCEPT 95's*.
993's require the 964 fan shroud part # 964.106.403.02 .
Many people are using these on 95's but fitment at the base is poor, and we do not recommend installation on this model year.

Rennline’s blower motor bypass pipe is a carbon fiber replica of the factory installed unit found on the lightweight 3.6 RS race cars. This pipe allows you to save 9 pounds from the removal of the factory blower motor assembly, but still have a functioning heater system in your car. Manufactured from ultra strong, lightweight carbon fiber and comes equipped with the aluminium fitting for the distributor breather tube.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M09NOPLATE

The product you are viewing cross references to these numbers

Rennline RSR/Cup Heater Fan Delete Kit.

Fits:
Porsche 964/993 1989-95 Non VarioCam Cars
*** Will not work on Turbo cars.

Removing the blower motor assembly from your 1989-98 964/993 is a very standard modification for cars that want to loose a few pounds. This modification reduces your cars weight by about 10 pounds and really cleans up the engine bay. This kit is an exact replica as used by Porsche Motorsports for the factory lightweight 964 CUP and 964 RSR race cars. Manufactured from aluminum and is available in Red and Black Powder coat or clear anodized. Comes with all the stainless steel hardware required for a 20 minute installation.

Note: Pictures may not show actual product.

Tapping screw B4,8 x 13 - Multiple applications



Fits:
Porsche 911 - 1970 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 928 - 1983 to 1995



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90038400601

The product you are viewing cross references to these numbers