Powerflex Black Series Bushes

Powerflex Black Series Anti Roll Bar Bushes Rear POLYURETHANE
Size: 20mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313C

Fits:
Porsche 911 SC 1974-83 Front axle
Porsche 911 TURBO 1985-88 Rear axle
Porsche 924 1976-77 Front axle
Porsche 924S 1986-88 Rear axle Cars with Sport Suspension
Porsche 944 1982-85 Front axle
Porsche 944 1985-88 Rear axle - Please choose by size
Porsche 964 1991-94 C2/C4 Rear axle Cars with manual transmission - Please choose by size
Porsche 993 C2S/C4S/RS Rear axle Cars with Sport Suspension - Please choose by size


Click 'Zoom in' to see parts diagram.
Diagram Ref No 17.

Pack of 2. Two bushes per car.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-20BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Drop link bushes, Rear.

Sold as 4 bushes (both rear drop links, these are replacement bushes the drop links are not included)

OEM Part Number: 477511051A

SET OF 4.



Fits:
Porsche 924 and S (all years)
Porsche 944 (1982 - 1985)
Porsche 944 inc S2 & Turbo (1985 - 1991)
Porsche 968 (1992-1995)

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 35

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-211BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bushes PFF57-205-16BLK
FRONT

Quantity: 2

Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 20mm, 21.5mm, 23mm & 24mm anti roll bars. The bar diameter reduces at the end to 16.45mm where 95134379300PF fits.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 944 1985-86 ALL Front
Porsche 944 1987-91 Front Cars with standard chassis (Not Turbo etc)

Please note price shown is for quantity 2.

Click 'Zoom in' to display fitment diagram - Ref No 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-205-16BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bushes PFF57-206BLK
FRONT

Quantity: 2

Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 25.5mm or 26.8mm anti roll bars. The bar diameter reduces at the end to 18mm where 95134379330PF fits.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 944 1987-91 Turbo Front
Porsche 944 Turbo S 1988 Front
Porsche 968 1992-95 Front Cars with standard suspension not M030 cars

Please note price shown for Polyurethane bushes is for Quantity 2.

Click 'Zoom in' to display fitment diagram - Ref No 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-206BLK

The product you are viewing cross references to these numbers

PowerFlex Black Series Front Drop Link Top Bushes.
Quantity per pack: 4 bushes, 4 washers, 2 lock nuts.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 944 1985-91 ALL Front
Porsche 968 1992-95 ALL Front


Click 'Zoom in' to display fitment diagram - Ref No 5, 8, 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-210BLK

The product you are viewing cross references to these numbers

Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 20mm bushes deliver enhanced handling, improved performance, and greater durability.

This round bush has a 40mm outer diameter and an overall length of 55mm. These 20mm bushes directly replace Porsche part numbers 477411053G and 477411053R.




Porsche 924 1982*
Porsche 924 1983-85
Porsche 924 Turbo 1982*
Porsche 924 Turbo 1983-85
Porsche 924 S 1986-88 - Vehicles Without Sports Suspension (PR 030)
Porsche 944-1 1982-85 - Vehicles Without Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles Without Sports Suspension (PR 030)

Diagram ref. 3.

*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible. 

For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.

Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.

The Powerflex Range:

Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Powerflex Materials:

The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.

Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.

Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-306-20BLK

The product you are viewing cross references to these numbers

Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 23mm bushes deliver enhanced handling, improved performance, and greater durability.

This round bush has a 40mm outer diameter and an overall length of 55mm. These 23mm bushes directly replace Porsche part number 477411053J.




Porsche 924 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar

Porsche 924 S 1986-88 - Vehicles With Sports Suspension (PR 030)
Porsche 944-1 1984-85 - Vehicles With Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles With Rear Anti-Roll Bar / Sports Suspension (PR 030/PR 404)

*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible. 

For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.

Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.

Diagram ref. 3.

*NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.

The Powerflex Range:

Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Powerflex Materials:

The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.

Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.

Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-306-23BLK

The product you are viewing cross references to these numbers

Replacement bushes for the aluminium bracket which connects the front anti-roll bar to the wishbone. 
Diagram ref. 6

Price is for a set of two. 

 

Fits:
Porsche 924 1982-85*
Porsche 924S 1986-88 
Porsche 944 1982-85

*Please Be Advised: Porsche revised the front suspension for the 924 in 1982. The VIN split can be found below, but it is fairly simple to perform a visual check - please see the product images. This product is intended for the later-style suspension setup, which uses an aluminium bracket to connect the anti-roll bar to the front wishbone. The part number for this bracket is 94434373500 (LEFT) and 94434373600 (RIGHT). 

VIN SPLIT:
F92-CN402 198 Onwards (924) 
F92-CN450 832 Onwards (US/Canadian 924 Models)
F93-CN100 306 Onwards (Turbo) 
F93-CN150 332 Onwards (US/Canadian/Japanese 924 Turbo Models)

Powerflex's Range...

Road Series – for Road and fast Road use.

POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.

Black Series – for Track and Motorsport use.

POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Heritage Collection – for Classic and Restoration use.

POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-307BLK

The product you are viewing cross references to these numbers

PowerFlex Front Wishbone Inner Front Bush.
Set of 2 for both wishbones

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.


- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Fits:
Porsche 944 1985-91 Alloy wishbone

Fits to No 2 on the diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-101BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Wishbone Inner Bush Rear
PAIR

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Diagram Ref No 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF85-213BLK

The product you are viewing cross references to these numbers

PowerFlex Black Series Front wischbone rear bush.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Fits:
Porsche 944 1986>>

Fits to No 10 on the diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-303BLK

The product you are viewing cross references to these numbers

Powerflex Black Series PFR57-220BLK



Rear Alxe Carrier Outer Mounting Bush.
SET OF2. Replacement for Porsche parts No. 477501069A

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 924 1976-88
Porsche 944 1986-91
Porsche 968 1992-95

Diagram Ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-220BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bushes Rear POLYURETHANE
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Refference to: 477411313B



Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.

Pack of 2. Two bushes per car

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-18BLK

The product you are viewing cross references to these numbers

SET OF 4 BUSHES (for both sides)

The original bushes are only available from Porsche bonded to the metal work of the 'strut' costing £400.00 per side! The Powerflex bushes are priced at a fraction of the cost which is helped by us utilising the original metal work.



Fits:
Porsche 924 S
Porsche 944 1985 Onwards
Porsche 968 1992-95

If you still have the original strut bushes on your 944/2 or 968 they will be worn causing rear geometry changes and stability issues. By fitting our new polyurethane bushes this will offer a solution plus improved stability.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Fits to No 22 on the diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-223BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Rear Trailing Arm Bush.
SET OF 2
Replacement for Porsche parts No. 477501541

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95

Fits into the end of Diagram Ref no 4.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-222BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Wishbone Inner Bush Front
PAIR

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85

Diagram Ref No 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF85-211BLK

The product you are viewing cross references to these numbers