Wheel Bearings & Kits

Bearing grease (200 g)



Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04311000

The product you are viewing cross references to these numbers

Drive shaft sealing ring.
58 x 81.2 x 5
REAR INNER SEALING RING



Fits:
Porsche 911 (930) Turbo 1975-89

Click 'zoom in' for large parts diagram.
Diagram ref no 12.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911321840

The product you are viewing cross references to these numbers

Drive shaft sealing ring, 58 x 81.2 x 5. REAR INNER SEALING RING
This seal fits around the rotating shaft or axle interface (typically within the rear wheel hub or drive-axle assembly) to keep lubricant contained and prevent dirt, moisture, and debris from entering. Its exact fit and high-quality materials ensure optimal lubrication, minimize wear, and extend the life of surrounding bearings and gears.

Fits:
Porsche 911 (930) Turbo 1975 - 1989

Diagram ref no 12.

• Dimension: Designed to replace the factory shaft or wheel hub seal (measuring 58 × 81.2 × 5 mm)
• Position: Rear wheel hub / drive-shaft bearing interface
• Benefit: Superior fit and sealing durability to maintain lubrication and protect drivetrain bearings and gears.

With time, heat, constant rotation, and oil exposure can cause the seal material to harden or crack. Once compromised, it allows lubricant to leak and contaminants to enter, leading to excessive bearing or gear wear and potential drivetrain failure.

When to Replace:
•  During rear axle or differential servicing, or when removing the drive shaft or hub.
•  If you notice oil or grease leaks around the axle, hub, or trailing arm area.
•  As part of preventive maintenance on high-mileage or performance-driven Porsche models.

Replacing restores proper fit, material integrity, and sealing performance - protecting your drivetrain and extending component life.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911321840

The product you are viewing cross references to these numbers

Drive shaft sealing ring.
65 x 85 x 8
REAR OUTER SEALING RING



Fits:
Porsche 911 (930) Turbo 1975-89

Click 'zoom in' for large parts diagram.
Diagram ref no 11.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911323540

The product you are viewing cross references to these numbers

Drive shaft sealing ring,  65 x 85 x 8. REAR OUTER SEALING RING
Shaft sealing ring, also commonly referred to as a drive shaft or outer seal, that sits around a rotating shaft or axle in the rear differential/axle assembly. Its primary function is to keep gear oil or differential lubricant contained while preventing contamination from entering the assembly.

Fits:
Porsche 911 (930) Turbo 1975 - 1989

Diagram ref no 11.

• Dimension: Manufactured to replicate the original Porsche part’s critical dimensions (65 × 85 × 8 mm)
• Position: Outer drive-shaft or axle tube interface, rear differential assembly
• Benefit: Accurate dimensions & material matching for proper sealing and long life

Over time, the original seal may harden, crack, or fail under heat, oil exposure and axle rotation, leading to oil leakage, differential lubricant loss or contamination ingress—potentially accelerating bearing or gear wear.

When to Replace:
• During rear axle or differential service, especially when removing the drive-shaft/cross-tube.
• If you observe lubricant leaking from around the outer axle or trailing arm area, or cleaned-up oil traces near the seal.
• As part of preventative maintenance when rebuilding suspensions or axles, especially in Turbo-Look or high-performance 911 models

Replacing with a new seal restores correct internal lubrication, prevents leakage and protects drivetrain components for the long term.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911323540

The product you are viewing cross references to these numbers

Front outer wheel bearing thrust washer.
2 required, sold each.

Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95

Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134166300

The product you are viewing cross references to these numbers

Front outer wheel bearing thrust washer. Left or Right; 18mm spindles.
2 required, sold each.

Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95

Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134166300

The product you are viewing cross references to these numbers

Front Wheel Hub Radial Seal. 45 X 62 X 12
Sold each - 2 required per car

Fits:
Porsche 356 C 1963-65
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 928 1978-95
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95

Diagram ref no 43

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477405641

The product you are viewing cross references to these numbers

O-ring wheel bearing spacer ring - 25,3 x 2,4
Sold each - 2 required per car

Fits:
Porsche 911 - 1965 to 1989
Porsche 914 - 1970 to 1976

Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970108450

The product you are viewing cross references to these numbers

O-ring wheel bearing spacer ring - 25,3 x 2,4
Sold each - 2 required per car



Fits:
Porsche 911 - 1965 to 1989
Porsche 914 - 1970 to 1976

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970108450

The product you are viewing cross references to these numbers

Radial seal front wheel bearing - 45 X 62 X 12
Sold each - 2 required per car

Fits:
Porsche 356 C 1963-65
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 928 1978-95
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95

Diagram ref no 43

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477405641

The product you are viewing cross references to these numbers

Taper roller wheel bearing.
FRONT INNER



Fits:
Porsche 911 1965-89
Porsche 930 (911) 1974-89
Porsche 924 1976-85
Porsche 944 1982-86
Porsche 914-6

Click 'Zoom in' for large parts diagram.
Diagram ref no 27.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99905909800

The product you are viewing cross references to these numbers

Taper roller wheel bearing.
FRONT INNER

Fits:
Porsche 911 1965-89
Porsche 930 (911) 1974-89
Porsche 924 1976-85
Porsche 944 1982-86
Porsche 914-6

Diagram Ref No 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99905909800

The product you are viewing cross references to these numbers

Tapper roller wheel bearing,
REAR INNER



Fits:
Porsche 911 Turbo (930) 3.0L 1975-77
Porsche 911 Turbo (930) 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 9.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99905904700

The product you are viewing cross references to these numbers