Specialist Tools

Adapter engine case holder.

Fits:
Porsche 911
Porsche 964
Porsche 993
Porsche 986 / 996
Porsche 987 / 997

This adapter ring is engineered to mount directly the engine case to any universal engine stand using four 3/8" bolts, enabling full 360-degree rotation of the engine.

It  is precisely machined with all necessary reliefs and notches to ensure proper clearance for the engine components, including the flywheel and its corresponding lock tool.

Alternator fan pulley wrench.
Reference numbers: 99957104702



Fits:
Porsche 911 F/G
Porsche 912

This hook wrench is an optimized version of the original on-board tool and fits better in the hole of the pulley thanks to the extended and curved pin. The locking key is a must for every 911 F/G model owner and allows you to separate the pulley from the fan wheel, for example to change the alternator V-belt.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99957104702

The product you are viewing cross references to these numbers

Bearing grease (200 g)



Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04311000

The product you are viewing cross references to these numbers

Bock engine stand for workbench.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986/987 Boxster
Porsche 987c Cayman

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer engine mounts. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand.
Here you get the required trestle to be able to mount the engine mount also on a workbench or the like.
We have the engine stands for all classic Porsche as well as the 3.4-3.8L waterboxers in our program.
The stand is for engine mounts with a diameter of 60mm.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6822

The product you are viewing cross references to these numbers

Cam / power steering block off plate for Porsche 911 / 964 / 993



Use this plate to block off the power steering pump opening on the cam towers on 993s, or for oil and injection pump openings on the cam tower on turbos and earlier 911s. This plate is custom designed to allow for both stock and non-stock cams.

Anodized aluminum.

For 911s through 1998.

Sold individually.

Cam timing indicator fixture (dual) for Porsche 911 / 964 / 993



STOMSKI RACING finally takes the guess work out of timing the 911 engines. No longer do you need to hassle with convoluted setups, indicator contacts slipping off of the valve retainer, or measurements that will not repeat. This fixture indexes off of two cam carrier studs and literally takes only 10 seconds to setup. Once in place, the SR098 consistently and repeatedly holds the dial indicator contact in the same place on the valve retainer- EVERY time.

Includes adapters and extensions for both metric and AGD (inch) indicators.
Anodized aluminum for years of service.

For all 911s including the 993.

Please note: Gauges sold separately.

Camber adjustment tool. Rear axle.
Porsche ref number 00072191710

Fits:
Porsche 911
Porsche 968
Porsche 944

This special tool fits all Porsche 911, 924/944/968 trailing arm rear axles with torsion bar suspension and is used to adjust the camber.
For the adjustment, the vehicle is jacked up, the semi-trailing arm with the two screw connections released and rotated by means of this eccentric tool against the axle swords.

The tool has a galvanized surface with passive layer.
Quality "Made in Germany"

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1118

The product you are viewing cross references to these numbers

Cam drive gear/inner sprocket puller for Porsche 911



More than occasionally the inner sprocket on the end of the 911 camshaft is jammed or fused in place and refuses to budge. The confined space of the chain box makes it impossible to leverage the gear off, and even if you can get an edge, chances are you will only cock the gear, jamming it further, or possibly breaking a tooth on the gear (or even mar the cam itself).

STOMSKI RACING's SR079 centers over the end of the camshaft and slips behind the sprocket flange, allowing you to smoothly and effortlessly slide the gear off– protecting both the camshaft and the gear itself (and the curse jar!). Black oxide hardened steel with stainless steel drive bolt.

Designed to pull the seized inner sprockets from the ends of the camshafts on and early air cooled 911 likes SC's etc, probably up to mid-993 as we think by then they stopped using the pin you slide in from outer sprocket into available slot in the inner sprocket which the tool is for, it's held in place with woodruff key to end of camshaft.

Cam nut tool for Porsche 911



This high quality tool is by far the best way to remove the nut off the end of the camshafts on early 911 engines (through 1980 1/2).

A 12-point socket fits precisely over the cam nut (46mm) while the cam holder fits through the center of the socket- ensuring no slippage, no more trashed nuts, and an easier torque of the nut.

Black oxide steel/cast.

Replaces BOTH factory tools P202 and P203.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR051

The product you are viewing cross references to these numbers

Camshaft tool securing bar 9191 for Porsche 911 cam timing. Camshaft tool is compatible with Porsche 9191. It secures the camshaft from rotating during R&R of camshaft nut. It is used to adjust valves or set cam timing for Porsche 911 80-89



Fits:
Porsche 911 1980-89

Application
Porsche 911 80-89: Compatible with Porsche 9191
Specification: Black colour
Features Highlights: Strong and durable

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00072191910

The product you are viewing cross references to these numbers

Circlip injector™ for Prosche 911



The cumbersome, awkward task of installing the wrist pin circlips into pistons has just gone from chore to joy. No more flying circlips, gouged fingers, scratched pistons, contortions, or swearing. Simply slip the circlip into the Circlip Injector Sleeve, insert the Circlip Injector Plunger, and "inject" the circlip into its wrist pin groove. Quick. Painless. Simple. Precisely machined from stainless steel.

Available in six stock sizes (19-24mm) and other sizes by special order (tool sizing corresponds to wrist pin diameter).

US Patent 8,302,304.

PDF Instructions (SR072)

Crankcase head stud driver for Porsche All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On



Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth (unless you are extra careful when removing the double nuts). Protect your hardware investment and speed installation by using STOMSKI RACING's Head Stud Driver.

Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.

Crankshaft holder for Porsche 911



At last an elegant way to hold the 911 crankshaft for inspection, cleaning, disassembly, and rod bolt stretching. The crank rotates smoothly between centres to allow for complete access to all journals. Mounts vertically or horizontally in you bench mounted vice for optimal versatility.

Made from stainless steel and anodized aluminium.

Cylinder hold down nuts, Set of 6 for Porsche 911



These specially designed and fabricated nuts secure the 911 cylinders in place during rebuild. The nuts allow for easy crank rotation and installation of pistons/cylinders without having the cylinders slip out of the case. Precisely fabricated from 2011 aluminum and anodized for years of service. Each nut is complete with a special Delrin insert to protect your cylinders.

Comes in a set of SIX.