Torsion Bar

Foam seal front torsion bar adjuster. 



Fits:
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134147500

The product you are viewing cross references to these numbers

Foam seal front torsion bar adjuster. 
Sold each - 2 required per car

Fits:
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989

Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134147500

The product you are viewing cross references to these numbers

Chrome Moly Light Weight Hollow Front Torsion Bar (SET OF 2)
- 21mm
- 22mm

Tighten up your suspension with these high precision, light weight, hollow torsion bars.

Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.

Zinc plated with plugged ends for superior corrosion resistance.

Precision machined splined ends for a perfect fit.

Center less ground and gun drilled for a consistent spring rate.

Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!

These are the highest quality bars on the market.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1S166911F

The product you are viewing cross references to these numbers

Light weight hollow rear torsion bar.  (SET OF 2)

Fits:
Porsche 911 65-86 Rear

Available in 7 sizes:

- 26mm
- 27mm
- 28mm
- 29mm
- 31mm
- 33mm

Tighten up your suspension with these high precision, light weight, hollow torsion bars.

Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.

Zinc plated with plugged ends for superior corrosion resistance.

Precision machined splined ends for a perfect fit.

Centre less ground and gun drilled for a consistent spring rate.

Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!

These are the highest quality bars on the market.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1S166911R

The product you are viewing cross references to these numbers

QuickChange™ Torsion Bars, FRONT
Sold per kit, 1 kit req'd per car.

Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76

QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.

Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.

QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

209202

The product you are viewing cross references to these numbers

QuickChange™ Torsion Bars, REAR
Sold per kit, 1 kit req'd per car.



Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates

PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)

QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.

Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.

QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

21020

The product you are viewing cross references to these numbers

Rear torsion bar cover with gasket, bracket and nut. 

Sold individually; x2 required per vehicle. 

Fits:
Porsche 911 1965-86
Porsche 911 (930) Turbo 1975-86

Porsche 912 1966-69
Porsche 912E 1976

Diagram ref. 33.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150407900

The product you are viewing cross references to these numbers

Spring plate covers normally rust, replacing them will give you a better ride.

Fits:
Porsche 911 1965-89
Porsche 930 1975-77

Diagram Ref No. 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133315300

The product you are viewing cross references to these numbers

Spring plate covers normally rust, replacing them will give you a better ride.

Fits:
Porsche 911 1965-89
Porsche 930 1975-77

Diagram Ref No. 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133315300

The product you are viewing cross references to these numbers

Torsion bar 19mm. 



Fits:
Porsche 911/911S 1965-67
Porsche 911 S/TU/L 1968
Porsche 911 T/E/S 1969
Porsche 911 T/S 1970-73
Porsche 911 E 1970-73
Porsche 911 CARRERA 2.7L 1970-73
Porsche 912 1965-69
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134310

The product you are viewing cross references to these numbers

Torsion bar clamp, LEFT.

Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134103702

The product you are viewing cross references to these numbers

Torsion bar clamp, LEFT.

Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134103702

The product you are viewing cross references to these numbers

Torsion bar protective clamp.

Fits:
Porsche 911 1965-73 Left or Right Side
Porsche 911 1974>> Right Side only
Porsche 911 (930) Turbo 1975-89 Right Side only

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134115900

The product you are viewing cross references to these numbers

Torsion bar protective clamp.

Fits:
Porsche 911 1965-73 Left or Right Side
Porsche 911 1974>> Right Side only
Porsche 911 (930) Turbo 1975-89 Right Side only

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134115900

The product you are viewing cross references to these numbers

Torsion bar,  26 mm.



Fits:
Porsche 911 Turbo 1975-88

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133310

The product you are viewing cross references to these numbers