Gearshift Control Parts

 Short shifter kit (30%)



Fits:
Porsche 911/930/914 1972-86
Porsche 930 Turbo 1975-86
* Will not work with G50 Transmission

Reduce the length of throws and give the shifter in your 911, 912 or 914 a more solid feel with this short throw shift kit. Machined from billet stock, this kit will reduce the throw of your shifts by approximately 30% and provide more precise engagement. Weighted to improve the speed and accuracy of your shifts with a minimal increase in effort, this shift kit provides benefits any driver will appreciate.

Download the detailed installation instructions

Short throw shifter for Porsche 930 1975-88 with 930 4 speed gearbox



Fits 911 with the 930 4 speed gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Pair with our Shift Knob / Extender is recommended.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-930-

The product you are viewing cross references to these numbers

Throttle bell crank support rod.



Fits:
Porsche 356B / 356C 1960-65
Porsche 911 1965-89
Porsche 914-6 / 914-6:SPM 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91430130701

The product you are viewing cross references to these numbers