Climate Control

Climate control hose sealing ring.

Fits:
Porsche 911 1965-89 all models

Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157291301

The product you are viewing cross references to these numbers

Climate control hose sealing ring.

Fits:
Porsche 911 1965-89 all models

Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157291301

The product you are viewing cross references to these numbers

Drain hose rubber.

Fits:
Porsche 911 1968-89

Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157132632

The product you are viewing cross references to these numbers

Electric Air Conditioning Kit Compressor and Condenser Half Kit for Porsche 911

The Electrocooler 'half system' allows existing AC cars to use our electric compressor and modern condenser with the existing evaporator blower mounted in the smuggler's box. 

Fits Porsche 911 models 1965 to 1989 with factory/dealer fitted AC. 

If your factory or dealer fitted evaporator / blower is in good condition but your compressor and hoses are tired, this is the kit for you.  The kit contains compressor and mounts for fitment ahead of the fuel tank.  The new condenser can be fitted in place of the washer bottle on 74 onwards cars.  Early cars can mount the condenser in the rear wheel well.  Complete new set of hoses and all wiring are included.

This is a 'half system' AC system to be used with the factory evaporator/blower.

• All Electric. All modern components
• Weighs around 22lbs (10 kg)
• Retains factory evaporator / blower
  
• Fits in front luggage bay
• Lightweight narrow hose set weighing under 4lbs (1.5kg)
• Easy Install. Non-damaging bolt-in installation
• Clutter Free. Uses existing air vents to deliver cool air
• Simple to Use. Controlled by a single ‘smart button’
• Energy Efficient. Uses less than 1 HP of engine power
• Kits available to fit 911s from 1965 to 1989 (please check for fitment before purchase)

For Installation Guide CLICK HERE

Electric Air Conditioning Kit with Dual Condensers for Porsche 911. 
Compressor mounted in the smugglers box on left hand drive cars and ahead of the fuel tank for right hand drive cars.

The Electrocooler electric air conditioning system for Porsche 911 is a revolutionary update for the complicated A/C and ventilation setup fitted to Porsche 911 models from 1974 to 1989.  

The kit is a total redesign of the 911 A/C system, with additional improvements to the fresh air blower unit and warm air distribution. It transforms the experience of travelling in an aircooled Porsche 911.

• All Electric. All modern components
• Weighs around 35lbs (16 kg)
• Fits in front luggage bay
• Lightweight narrow hose set weighing under 4lbs (1.5kg).
• Easy Install. Non-damaging bolt-in installation.
• Clutter Free. Uses the standard fresh air vents to deliver cool air.
• Simple to Use. Control by a single 'smart button'.
• Modern double cage Gen 2 blower.
• Energy Efficient. Uses less than 1 HP of engine power.
• Kits available to fit 911 from 1974 to 1989

This is a dual condenser system suitable for high heat (> 35 deg C) and humidity climates.
A double condenser installation is highly recommended for many hot and humid parts of the world, such as Florida or Singapore.

Second condenser can be installed in the left rear fender, ahead or behind the rear wheel.  See back of install manual for details.

Please note
Our electric air conditioning likes a healthy current so we recommend upgrading the original alternator in the vast majority of installations.
All kits now include our Gen 2 Blower.

INFO
Complete HVAC kit for the Porsche 911 models 1974 to 1989.

The kit is a complete redesign of the 911 A/C system with notable improvements to the blower and heating distribution as well.

For Installation Guide CLICK HERE

Electric Air Conditioning Kit with a Single Condenser for Porsche 911
Compressor mounted in the smugglers box on left hand drive cars and ahead of the fuel tank for right hand drive cars.

The Electrocooler electric air conditioning system for Porsche 911 is a revolutionary update for the complicated A/C and ventilation setup fitted to Porsche 911 models from 1974 to 1989.  

The kit is a total redesign of the 911 A/C system, with additional improvements to the fresh air blower unit and warm air distribution. It transforms the experience of travelling in an aircooled Porsche 911.

• All Electric. All modern components
• Weighs around 30 lbs (14 kg)
• Fits in front luggage bay
• Lightweight narrow hose set weighing under 4lbs (1.5kg).
• Easy Install. Non-damaging bolt-in installation.
• Clutter Free. Uses the standard fresh air vents to deliver cool air.
• Simple to Use. Control by a single 'smart button'.
• Modern double cage Gen 2 blower.
• Energy Efficient. Uses less than 1 HP of engine power.
• Kits available to fit 911 from 1974 to 1989

This is a single condenser suitable for climates up to 35 deg C ambient and low humidity.   For high heat and humidity climates we recommend our dual condenser system.

Please note
Our electric air conditioning likes a healthy current so we recommend upgrading the original alternator in the vast majority of installations.
All kits now include our Gen 2 Blower.

INFO
Complete HVAC kit for the Porsche 911 models 1974 to 1989.

The kit is a complete redesign of the 911 A/C system with notable improvements to the blower and heating distribution as well.

For Installation Guide CLICK HERE

Heater control knob. RED.

Fits:
Porsche 911 1969-85
Porsche 914

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157191800

The product you are viewing cross references to these numbers

Heater control knob. RED.

Fits:
Porsche 911 1969-85
Porsche 914

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90157191800

The product you are viewing cross references to these numbers

Heating actuating lever bearing pin.
Klassic Line Brand - OEM products manufactured by the Original Equipment Manufacturer.

Fits:
Porsche 911 1974-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 17/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142451901

The product you are viewing cross references to these numbers

Rennline aluminium heater control knob



Fits:
Porsche 911/912/930 1972-89

Rennline's billet aluminium heater control knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory heater control knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply tap off your old knob, and tap ours on, installation is literally a snap.

Rennline billet aluminium HVAC control knob.



Fits:
Porsche 911/912/930 1972-89
Porsche 914 all

Rennline's billet aluminium heater control knobs are the perfect inexpensive interior upgrade for any 911/914. Factory heater control knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red or black anodized finishes for a durable, long lasting appearance. Simply pull off your old knob, and tap ours on, installation is literally a snap.

Note: HVAC Controls not included.

Billet HVAC control panel.



Fits:
Porsche 65-89 911/912/930

The Rennline HVAC control panel is CNC milled from a billet aluminum block and anodized for a classic and elegant dash upgrade. Whether you're trying to clean up the dash on your early 911, or backdating the dash on your G-body car, these HVAC controls are sure to do the job. Featuring simplified markings and updated micro LED indicators, the unit pairs very well with our I12 Billet HVAC Knobs (not included but available separately). OEM plastic units are prone to scratching and fading, while these units are proven to stand the test of time. Installs easily to factory control mechanism.

Note: If installing in a 74-89 car, the dash must be backdated as these controls are smaller than the later controls.