Pedals / Floor Boards / Track Mats LHD Cars

Take control of your driving ergonomics with Rennline’s pedal lifter plate, designed to transform your existing Rennline #P70 gas pedal cover into a fully adjustable setup.

Engineered for quick, hassle-free installation, this plate offers up to 1 inch of height adjustment plus lateral and longitudinal pedal angle tuning for perfect heel-and-toe positioning. All adjustments are made easily using three front-facing mounting screws on the face of the pedal. 

Fits:
Compatible with Rennline #P70 accelerator pedal covers (sold separately)  
Porsche 911 1965-89
Porsche 912 1966-69
Porsche 911 Turbo (930) 1975-89

Porsche 914/4 1970-76
Porsche 914/6 1970-72

Porsche 964 Carrera 1989-94
Porsche 964 Turbo 1991-94

Porsche 993 Carrera 1994-98
Porsche 993 Turbo 1995-98

NOTE: This accessory is designed to work exclusively with Rennline #P70 (Rubber Grip) accelerator pedal covers, which are sold separately. Please note that this listing is for the lifter plate only - pedal covers are not included.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PA70

The product you are viewing cross references to these numbers

Aluminium pedal set.
Available in black or clear finish



Fits
LHD and RHD Manual Cars Only
Porsche 911 / 912 - 1970 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 - 1998 to 2005
Porsche 997 - 2005 to 2012
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster / Cayman - 2005 to 2012
Porsche 924 / 944 / 968 - 1976 to 1995

CNC machined from 6061 aluminum billet and hard black or clear anodized for increased wear and corrosion resistance, and an exceptionally durable finish. Countersunk holes for installation - including matching black PVD coated Ti6Al4V countersunk bolts and lock nuts for a perfect fit and a killer look.

Perfect complement for our punched floorboards - they combine the utmost perceived quality for your street outlaw, and the maximum functionality and abuse resistance for your track machine.

Balance beam brake pedal assembly - LHD 



Fits:
Porsche 911 - 1965 to 1977

Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976

Note - No bodywork adjustments to the footwell are required to fit the pedal assembly.

We have re-issued this motorsport inspired accessory that has not been available for many years

Left Hand Drive (LHD) only

As fitted to the 911 SC RS by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.

If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs  the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.

The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142305401

The product you are viewing cross references to these numbers

Balance beam brake pedal assembly RSR style - LHD. 

Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976

We have re-issued this motorsport inspired accessory that has not been available for many years

Left Hand Drive (LHD) only

Note: The floor pan must be modified and included in the kit is the reinforcement panel required. 

As fitted to the 2.8 RSR and 3.0 RSR by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.

If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs  the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.

The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.

If you don't want to make any changes to the bodywork, or originality is not so important to you, use the balance arm brake system of the 911 SC RS (item number 91142305401/1).  

Balance beam brake pedal installation kit. 

Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976
With brake beam brake pedal installation

The set contains the additional parts that are required for installing the balance beam brake system in the vehicle.

Kit Contains:
Brake fluid reservoirs with clamps x 2
Connecting hoses between the reservoir and master brake cylinder with suitable clamps
Connections on the master brake cylinder on the inlet side, 
Adapter to M10x1 thread for the brake light switch
Pressure-switching brake light switch
Distribution piece for the front brake circuit (if necessary, the switch can be installed at this point)
Copper sealing rings x 4 

With the standard pedals, the brake light switch is actuated mechanically by the brake pedal, which is no longer possible with the balance arm brake system. 
This necessitates hydraulic actuation, which is easily integrated into the brake line using a connector and a pressure-triggering brake light switch.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135501313

The product you are viewing cross references to these numbers

Rennline Aluminium 3 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 914 1970-76

Note: Throttle extensions and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P7060

The product you are viewing cross references to these numbers

Rennline Aluminium 3 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 914 1970-76

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P4421

The product you are viewing cross references to these numbers

Rennline Aluminium 4 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 Targa+Cabrio 1965-89 Porsche 964 1989-94
Porsche 993 1995-98

Note: Throttle extensions and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P706053

The product you are viewing cross references to these numbers

Rennline Aluminium 4 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 914 ALL 1970-76

Note: Throttle extensions and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P706052

The product you are viewing cross references to these numbers

Rennline Aluminium 4 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 914 1970-76 ALL Manual cars only


Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P442112

The product you are viewing cross references to these numbers

Rennline Aluminium Dead Pedal Perforated.
LHD Cars

Fits:
Porsche 914 1970-76 All

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P12

The product you are viewing cross references to these numbers

Rennline Aluminium Floor Board. Driver Side.
LHD Cars



Fits:
Porsche 914 All 1970-76


Note: Pictures may not show actual product.

Rennline Aluminium Throttle Stop.



Fits:
Porsche 911/912/930 1965-73
Porsche 914 All

Until now, there has never been a source for a new throttle stop, which on many older 911's and 914's is battered from years of use. Rennline's new aluminum throttle stop mounts on both stock and Rennline floor boards, and comes with a new nylon adjuster bolt. Stainless hardware is included for attachment to Rennline floorboards.

Note: Pictures may not show actual product.