Wiring harness

Complete tunnel harness.
The tunnel harness runs from the fuse panel to the instrumentation, switches, rear lights, and engine.



Fits:
Porsche 911 / 912 1965-68

Included with the harness are:
- Moulded connectors compatible with original plugs
- Pre-terminated fuse panel with fuses
- Bulb sockets for dash
- Neoprene covering around the torsion tube
- Correct colours of wire as per wiring diagram

Made in Canada

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901612TH65-68

The product you are viewing cross references to these numbers

External starter motor relay.
Bypass your expensive ignition switch and install a hot start relay that will lead the current directly to the starter.
We have a 6 or 12 volt version and it works in any classic.

Fits:
Porsche 911 / 924 / 928 / 914 / 944 / 968 / 356

This relay can be placed near the starter motor and is used to limit the starting current and no longer allow it to be switched via the ignition switch.

Gauge Ground Harness / Ground Cable Instruments

Fits Porsche 911/912 1965-68

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161231121

The product you are viewing cross references to these numbers

Ignition switch wiring harness loom bullet type connector.



Fits:
Porsche 911 / 912 - 1965 to 1968

Molded 8 pole bullet connector, wiring to original type ignition switch (901.613.101.10) and headlight switch.

This is for the ignition switch that has the round, bullet type electrical connectors.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200302

The product you are viewing cross references to these numbers

Ignition switch wiring harness loom spade type connector.



Fits:
Porsche 911 / 912 - 1965 to 1968

Molded 8 pole flat, spade connector, wiring to ignition switch (901 612 003 01) and headlight switch.

This is for the ignition switch that has the flat, spade type electrical connectors.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200301

The product you are viewing cross references to these numbers

Inline fuse for dash illumination lights. 



Fits:
Porsche 911 - 1965 to 1989

The power supply lead (black-blue) for the dashboard illumination is unfused.

A short in the brass bulb holder can lead to serious damage in your wiring harness. This easy to install inline fuse holder protects your wiring and expensive light switch.

This inline fuse can be positioned at the light switch in between terminal 58A  and the black blue wire(s) *
* for 1969 and 1970 models this wire will be black-purple.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161204303

The product you are viewing cross references to these numbers

License plate light harness.



Fits:
Porsche 911 1965-68



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161204120

The product you are viewing cross references to these numbers

License plate light harness.



Fits:
Porsche 911 1969

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161204121

The product you are viewing cross references to these numbers

Protective sheath covering. 



Fits:

Porsche 911 / 912 - 1965 to 1989
Porsche 914

Protective sheathing cover for fuel ventilation lines and wiring harness

Click 'Zoom in' for large parts diagram.
Diagram ref no 42

Trunk light wiring harness loom.

Fits:
Porsche 911/ 912 - 1965 to 1974

Harness in front trunk, connects on left side in trunk to main harness (for double lamps in hood)

As original colored wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.
Handmade to concourse quality.

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161204200

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.



Fits:
Porsche 912 - 1969

Complete 912 tunnel harness with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.

Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90261200300

The product you are viewing cross references to these numbers

Wire harness front luggage compartment.
Complete front harness from fuse box to front, headlights, horns, turn signal, fog lights. Each wire at the right length with original colour coded wiring. H4 connectors included.

Fits:
Porsche 901- 911 and 912 1964-1965

* This is the model that fits only 1964 and 1965 911 /912 with the washer pump on the right !

 New 4 pole fuel connector included.

•  As original coloured wiring.
•  Original neoprene terminal sleeves used, (no shrink tube!)
•  Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
•  Gasoline, oil, battery acid, engine coolant resistant. 
•  High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous. 
•  Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200101A

The product you are viewing cross references to these numbers

Wire harness front luggage compartment.

Fits:
Porsche 911 and 912 1966-1968

Complete front harness from fusebox to front, headlights, horns, turn signal, washer pump, fog lights. Each wire at the right length with original colour coded wiring. H4 connectors included.

New 4 pole fuel connectors included.

•  As original coloured wiring.
•  Original neoprene terminal sleeves used, (no shrink tube!)
•  Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
•  Gasoline, oil, battery acid, engine coolant resistant.
•  High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
•  Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200101

The product you are viewing cross references to these numbers

Wire harness front luggage compartment.

Fits:
Porsche 911 and 912 1966-1968 (Zuffenhausen) 
* this is the taped version, only used for car's build at Zuffenhausen

Complete front harness from fuse box to front, headlights, horns, turn signal, washer pump, fog lights. Each wire at the right length with original colour coded wiring. H4 connectors included.

New 4 pole fuel connectors included.

•  As original coloured wiring.
•  Original neoprene terminal sleeves used, (no shrink tube!)
•  Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53 Gasoline, oil, battery acid, engine coolant resistant.
•  High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
•  Handmade in Holland, concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200101Z

The product you are viewing cross references to these numbers