Air con condensers & desiccators
The Electrocooler 'half system' allows existing AC cars to use our electric compressor and modern condenser with the existing evaporator blower mounted in the smuggler's box.
Fits Porsche 911 models 1965 to 1989 with factory/dealer fitted AC.
If your factory or dealer fitted evaporator / blower is in good condition but your compressor and hoses are tired, this is the kit for you. The kit contains compressor and mounts for fitment ahead of the fuel tank. The new condenser can be fitted in place of the washer bottle on 74 onwards cars. Early cars can mount the condenser in the rear wheel well. Complete new set of hoses and all wiring are included.
This is a 'half system' AC system to be used with the factory evaporator/blower.
- All Electric. All modern components
- Weighs around 22lbs (10 kg)
- Retains factory evaporator / blower
- Fits in front luggage bay
- Lightweight narrow hose set weighing under 4lbs (1.5kg)
- Easy Install. Non-damaging bolt-in installation
- Clutter Free. Uses existing air vents to deliver cool air
- Simple to Use. Controlled by a single ‘smart button’
- Energy Efficient. Uses less than 1 HP of engine power
- Kits available to fit 911s from 1965 to 1989 (please check for fitment before purchase)
For Installation Guide CLICK HERE
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche Air Conditioning Condensers
The auto air conditioning system is also responsible for removing heat from the cabin of the vehicle. AC condensers are responsible for dissipating this heat. It is usually located in front of the radiator. AC condensers need good air flow in order for the AC system to work properly. Hot gas flows to the top of the AC condenser where the gas cools off. It then condenses and flows out of the AC condenser as a high pressure liquid.
Porsche Air Con Driers / Dryers
The receiver-drier is used on the high side of systems that use an expansion valve. The primary function of the Porsche drier is to separate gas and liquid. The secondary purpose is to remove moisture and filter out dirt.
