Anti Roll Bar Bushes
Filter by brand
91134379202/1KIT
Product Information
Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Quantity: Set of 4 pieces
• Inner Diameter: 16 mm (designed for 16 mm sway bar)
• Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
• Position: Front suspension — stabilizer bar mounting locations (two per side)
• Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
• Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
• Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps
Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.
Replace this set when:
• You hear clunking or squeaking noises from the front suspension
• The car feels less stable in corners or exhibits excessive body roll
• The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service
Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
The product you are viewing cross references to these numbers
Product Information
Front Stabilizer Bar Mounting Bushing / Sway Bar Bushing, SET OF 4.Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Quantity: Set of 4 pieces
• Inner Diameter: 16 mm (designed for 16 mm sway bar)
• Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
• Position: Front suspension — stabilizer bar mounting locations (two per side)
• Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
• Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
• Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps
Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.
Replace this set when:
• You hear clunking or squeaking noises from the front suspension
• The car feels less stable in corners or exhibits excessive body roll
• The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service
Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
91134379202
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
4 x Front stabilizer bar bush 16mm. Porsche 911 74-77 (91134379202/1
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
€44.48 inc. VAT
Now €40.04 inc. VAT
Orderable - 14 to 21 Days
SUSPBUSHKIT/2
Product Information
Product Information
Bush kit suspension rebuild. Front and Rear axles
Fits:
Porsche 911- 1974 to 1976
Please check front anti roll bar thickness - 16mm or 20mm
Suspension bush rebuild kit using standard shore rating (not uprated)
About kit
This kit is comprised of the following items:
4 x Front stabilizer bar bush 16mm. Porsche 911 74-77 (91134379202/1
4 x Stabilizer bar bush, Front 20mm. Porsche 911 74-86 (91134379203/1
1 x Front control / A-Arm bushing kit. Porsche 911/912/914 (91134190100/2
2 x Front mount support for Porsche 911 1970>> / 930 / 914 (91134101800/1
2 x Spring plate with bushing rear. Porsche 911 1969-76 (90133300309/1
4 x Trailing arm top silencer block. Sold each. Porsche 911/912 (90133105900/1
4 x Shock absorber mount ring. Porsche 911/912 / 356 (91133352100
4 x Stabilizer bar / drop link bush, Rear 18mm for Porsche 911 (91133379305/1
1 x Drop link bush, rear top. Porsche 911 1965-77 (90134378200/1
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
€889.68 inc. VAT
Now €806.71 inc. VAT
Orderable - 14 to 21 Days
PFF57-403-16
Product Information
Size: 16mm
SET OF 4
Fits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-403-16
The product you are viewing cross references to these numbers
Product Information
Powerflex Stabilizer Bar Bush FrontSize: 16mm
SET OF 4
Fits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-403-16
91134379202
PFF57-403-16
PFF5740316
PFF57403-16
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
€89.62 inc. VAT
Now €80.66 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PFF57-403-20
Product Information
Size: 20mm
Replacement for Porsche parts No. 91134379203
SET OF 4
Fits:
Porsche 911 1974-86 Front axle
Porsche 911 Turbo (930) 1975-86 Front axle
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-403-20
The product you are viewing cross references to these numbers
Product Information
Powerflex Anti Roll Bar Bush - FrontSize: 20mm
Replacement for Porsche parts No. 91134379203
SET OF 4
Fits:
Porsche 911 1974-86 Front axle
Porsche 911 Turbo (930) 1975-86 Front axle
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-403-20
91134379203
PFF57-403-20
PFF5740320
PFF57403-20
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€89.62 inc. VAT
Now €80.66 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91134379202/1
Product Information
Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Sold each, 4 required.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Inner Diameter: 16 mm (fits 16 mm sway bar)
• Function: Supports and isolates anti-roll bar from chassis while allowing movement
• Position: Front suspension — stabilizer bar mounting location
• Symptoms of wear: Squeaking, sway bar movement, body roll, looseness or play in suspension
• Benefits: OEM-like material and fit, quieter ride, preserved bar function, durability
• Installation: Fit over the bar, seat in bracket cradle, use correct clamps or straps
Over time, stabilizer (sway) bar bushings endure constant twisting, compression, and exposure to heat, oil, and road contaminants. The rubber material gradually hardens, cracks, or deforms, reducing its ability to isolate movement and maintain bar tension.
When this happens, the stabilizer bar can shift or rattle inside the mount, leading to poor handling balance and unwanted suspension noise.
Replace this bushing when:
• You notice clunking, squeaking, or knocking noises over bumps or during cornering
• The car feels less stable in turns or exhibits excessive body roll
• There are visible cracks, tears, or looseness in the rubber mount
• Performing suspension or sway bar service, or during a front-end restoration
Installing fresh bushings restores the correct preload and isolation in the stabilizer system — reducing body roll, eliminating noise, and bringing back that original Porsche steering precision and confidence.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
The product you are viewing cross references to these numbers
Product Information
Front Stabilizer Bar Mounting Bushing / Sway Bar BushingSize: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Sold each, 4 required.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Inner Diameter: 16 mm (fits 16 mm sway bar)
• Function: Supports and isolates anti-roll bar from chassis while allowing movement
• Position: Front suspension — stabilizer bar mounting location
• Symptoms of wear: Squeaking, sway bar movement, body roll, looseness or play in suspension
• Benefits: OEM-like material and fit, quieter ride, preserved bar function, durability
• Installation: Fit over the bar, seat in bracket cradle, use correct clamps or straps
Over time, stabilizer (sway) bar bushings endure constant twisting, compression, and exposure to heat, oil, and road contaminants. The rubber material gradually hardens, cracks, or deforms, reducing its ability to isolate movement and maintain bar tension.
When this happens, the stabilizer bar can shift or rattle inside the mount, leading to poor handling balance and unwanted suspension noise.
Replace this bushing when:
• You notice clunking, squeaking, or knocking noises over bumps or during cornering
• The car feels less stable in turns or exhibits excessive body roll
• There are visible cracks, tears, or looseness in the rubber mount
• Performing suspension or sway bar service, or during a front-end restoration
Installing fresh bushings restores the correct preload and isolation in the stabilizer system — reducing body roll, eliminating noise, and bringing back that original Porsche steering precision and confidence.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
91134379202
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
€11.12 inc. VAT
Now €10.01 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PFC
Product Information
Product Information
Lateral support clamp anti roll bar. Anti-Roll Bars (ARB’s) play an important role in a vehicle’s suspension system, helping to reduce body roll by transferring cornering load from one side of a vehicle to the other.
Often mounted to the vehicle’s chassis with rubber bushes, these bushes ensure the bar works as intended. To prevent the anti-roll bar from moving laterally within its mounts when turning, OE manufacturers will either bond the bushes to the bar, add dead-stops to the bar itself, or rely solely on the clamping pressure of the rubber.
But what happens when those bushes wear and need to be replaced? Often anti-roll bars with bonded bushes come as a costly complete assembly, so the alternative is to fit a more cost-effective unbonded polyurethane replacement, like the many we offer.
In most cases, friction from the bush will prevent any side-to-side bar movement. Still, when turning aggressively or cornering at higher speeds, a laterally shifting anti-roll bar decreases the efficiency and effectiveness of the bar, changing the dynamics of your suspension system in unpredictable ways. It also poses the risk of the bar fouling on other areas of the vehicle or suspension system.
Anti Roll Bar Diameter
Prices from: €47.33 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
KIT5217K
Product Information
Fits:
Porsche 911 1974-85 Cars with 18mm Front and 22mm Rear anti-roll bars
This kit includes
1 x SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 x SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1x SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1375K Rear Engine Mounting Bush Kit 4 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 x SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 x SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Product Information
SuperPro Polyurethane Suspension Bush Kit.Fits:
Porsche 911 1974-85 Cars with 18mm Front and 22mm Rear anti-roll bars
This kit includes
1 x SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 x SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1x SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1375K Rear Engine Mounting Bush Kit 4 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 x SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 x SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€526.56 inc. VAT
Now €473.90 inc. VAT
Orderable - 3 to 6 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
PFR57-412-18
Product Information
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-18
The product you are viewing cross references to these numbers
Product Information
Powerflex Stabilizer Bar Bush Rear.Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-18
91133379302
PFR57-412-18
PFR5741218
PFR57412-18
91133379305
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 914 (1970-1976)
€89.62 inc. VAT
Now €80.66 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PFR57-412-18H
Product Information
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-18H
The product you are viewing cross references to these numbers
Product Information
Powerflex Heritage Collection Stabilizer Bar Bush Rear.Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-18H
91133379302
PFR57-412-18
PFR5741218
PFR57412-18
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 914 (1970-1976)
€89.62 inc. VAT
Now €80.66 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91133379305/1
Product Information
Drop link bush, Rear - 18mm.
Fits: left and right side.
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Click 'Zoom in' for large parts diagram.
Diagram ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133379305
The product you are viewing cross references to these numbers
Product Information
Stabilizer bar bush, Rear - 18mm. 1 item (4 per car)Drop link bush, Rear - 18mm.
Fits: left and right side.
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Click 'Zoom in' for large parts diagram.
Diagram ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133379305
91133379305
91133379302
91133379300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
€11.64 inc. VAT
Now €10.48 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91133379305
Product Information
Drop Link Bush Rear - 18mm.
Fits: left and right side.
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Click 'Zoom in' for large parts diagram.
Diagram ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133379305
The product you are viewing cross references to these numbers
Product Information
Stabilizer Bar Bush Rear - 18mm. 1 item (4 per car)Drop Link Bush Rear - 18mm.
Fits: left and right side.
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Click 'Zoom in' for large parts diagram.
Diagram ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133379305
91133379305
91133379302
91133379300
1650450200
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
Price: €40.66 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
PFR57-412-18BLK
Product Information
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302.
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-18BLK
The product you are viewing cross references to these numbers
Product Information
Powerflex Black Series Stabilizer Bar Bush Rear.Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302.
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-18BLK
91133379302
PFR57-412-18
PFR5741218
PFR57412-18
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 914 (1970-1976)
Price: €98.75 inc. VAT
Orderable - 5 to 7 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
477411313N/1
Product Information
Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size
This part number has been superseded from previous numbers:
- 477411313B
Click 'Zoom in' to display fitment diagram - Ref No 11.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477411313N
The product you are viewing cross references to these numbers
Product Information
Stabilizer bar bush 18mmFits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size
This part number has been superseded from previous numbers:
- 477411313B
Click 'Zoom in' to display fitment diagram - Ref No 11.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477411313N
477411313B
477411313N
PF57209-18
1650450300
SPF0134-18
SPF0134-18K
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
€14.04 inc. VAT
Now €12.64 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
SPF0134-
Product Information
SET OF 2
Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPF0134-
The product you are viewing cross references to these numbers
Product Information
SuperPro Stabilizer Bar Bush D-Shape (W32mm x L35mm)SET OF 2
Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPF0134-
477411313B
477411313N
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Select size
Prices from: €23.31 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
91134379202
Product Information
Fits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
The product you are viewing cross references to these numbers
Product Information
Stabilizer Bar Bush Front. Size: 16mmFits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134379202
91134379202
1640600400
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Price: €18.17 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PFF57-403-16H
Product Information
Replacement OEM Part Number: 91134379202
Size: 16mm
SET OF 4
Fits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Note: Please measure anti roll bar diameter before ordering.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-403-16H
The product you are viewing cross references to these numbers
Product Information
Powerflex Heritage Collection Stabilizer Bar Bush Front.Replacement OEM Part Number: 91134379202
Size: 16mm
SET OF 4
Fits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Note: Please measure anti roll bar diameter before ordering.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-403-16H
91134379202
PFF57-403-16
PFF5740316
PFF57403-16
PFF57-403-16H
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Price: €89.62 inc. VAT
Orderable - 5 to 7 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
You may also like
-
Anti Roll Bar
-
Anti Roll Bar Bracket
-
Ball Joints
-
Drop Links & Bushes FRONT
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Shock Absorber Parts REAR
-
Track Control Arms FRONT
-
Track Control Arm REAR
-
Wheel Bearings & Kits
-
Hub Nut
-
Wishbones & bushes
-
Torsion Bar
-
Spring Plate
-
Rear Trailing Arm
-
Cross Member & Parts
-
Wheel Hub / Carrier
-
SuperPro Polyurethane Bushes
-
Powerflex Heritage Collection
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Popular Models
