Oil Radiators / Heat Exchangers

Oil cooler racing version left hand front. 



Fits:
Porsche 911 ST / RSR

Dimensions:

Power measurement - 280x190x52mm
External dimension - 380x195x52mm
Connections - M30 x 1.5 or M26 x 1.5 outside

Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling

Fits
911/930 models up to 1989

RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units

These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling

Product Features:

•High Efficiency & Rugged Durability Bar/Plate Design

• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8201

The product you are viewing cross references to these numbers

Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W

Fits:
Porsche 911/930 models up to 1989

RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units

These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling

Product Features:

•High Efficiency & Rugged Durability Bar/Plate Design

• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8202

The product you are viewing cross references to these numbers

Cover plate for oil cooler, RIGHT, incl gaskets.

Fits:
Porsche 911S 2.0 1969
Porsche 911S 2.2 1970-71

Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110708500

The product you are viewing cross references to these numbers

Cover plate for oil cooler, RIGHT



Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110708500

The product you are viewing cross references to these numbers

Engine oil cooler suction hose.

Fits:
Porsche 911 T-E/E/S 1972
Porsche 911 T-V 1972

Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120731802

The product you are viewing cross references to these numbers

Engine oil cooler suction hose.

Fits:
Porsche 911 T-E/E/S 1972
Porsche 911 T-V 1972

Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120731802

The product you are viewing cross references to these numbers

Oil cooler kit for front bumper. 



Fits:
Porsche 911 2.7RS / 2.8 RSR - 1973
Porsche 911 G-Body backdates - 1974 to 1989

Kit Includes
Front bumper centre oil cooler
Oil cooler mounts, brackets and screws
Oil cooler pipe x 2
Oil pipe connector x 2

Modification and welding is required to the trunk front section.
The centre oil cooler can be added to the existing front wing oil cooler circuit.

Dimensions:
Total width (without connectors) = 58 cm
Height with connecting support: 12 cm
Depth: = 6,3 cm.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

11F-R130

The product you are viewing cross references to these numbers

Oil cooler tester for Porsche 911

No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR009

The product you are viewing cross references to these numbers

Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.



Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110704700

The product you are viewing cross references to these numbers

Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.

Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110704700

The product you are viewing cross references to these numbers

Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.

Fits:
Porsche 911 1965-71

Diagram ref No 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110704103

The product you are viewing cross references to these numbers

Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.

Fits:
Porsche 911 1965-71

Diagram ref No 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110704103

The product you are viewing cross references to these numbers

Radiator engine oil cooler.
Radiator type fits in engine compartment.



Fits:
Porsche 911 1972-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110704102

The product you are viewing cross references to these numbers

Radiator engine oil cooler.
Radiator type fits in engine compartment.



Fits:
Porsche 911 1972-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 8.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110704102

The product you are viewing cross references to these numbers

Radiator oil cooler with threaded connector, M26x1.5, Front.



Fits:
Porsche 911 S 1969-1971

Click 'Zoom in' for large parts diagram.
Diagram Ref No 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110704603

The product you are viewing cross references to these numbers