Rear Trailing Arm

HD trailing arm bushing kit.
Comes as a complete kit, (1) per car with bushings for both rear sides. replacement for OE 90133105900



Fits:
Porsche 911 / 912 / 930 1965-89

High Density trailing arm bushings for the 911 can both eliminate clunks from failing factory units and restore proper suspension geometry in your street or track car. Made from 25% higher durometer than OEM (901.331.050.00) parts, these are the ideal replacement for either failed or simply aging stock rubber units. These bushings locate rear trailing arms better under the sustained loads often experienced on track and in the rigors of everyday driving.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133105900

The product you are viewing cross references to these numbers

SuperPro Polyurethane Suspension Bush Kit.



Fits:
Porsche 911 1965-73

This kit includes
1 X SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 X SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 X SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1 X SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1375K Rear Engine Mounting Bush Kit 8 Bushes, 4 Steel Tubes, SuperPro Grease
1 X SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 X SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 X SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease


Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

SuperPro Polyurethane Suspension Bush Kit.



Fits:
Porsche 911 1974-85 Cars with 18mm Front and 22mm Rear anti-roll bars

This kit includes
1 x SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 x SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1x SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1375K Rear Engine Mounting Bush Kit 4 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 x SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 x SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Exchange Rear axle trailing arm. Porsche 911 1974-89 Reconditioned 

Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Please note:
Reconditioned products are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer. Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer. Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning. All surcharges and exchanges are subject to our terms and conditions.       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133151

The product you are viewing cross references to these numbers

Rear axle trailing arm.



Fits:
Porsche 930 Turbo 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033151

The product you are viewing cross references to these numbers

Spring plate rubber bushing kit
1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976

Choice of Compound

Trailing arm bushings are available in "Sport" and "Stock" hardness.

Stock Hardness
Replicates the OEM rubber to ensure factory ride quality and performance levels.

Sport Hardness
Sport bushings have a harder rubber compound for less deflection and more precise handling.
Sport provides a nice intermediate step between our Stock rubber trailing arm bushings are our top performing WeatherSealed Monoballs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22900

The product you are viewing cross references to these numbers

Rear Trailing Arm to Spring Plate Hexagon Nut. M12x1,5



Fits:
Porsche 356 B / 356 C
Porsche 911 1965-83
Porsche 911 Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 28.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90003403601

The product you are viewing cross references to these numbers

Rear wheel bearing cover plate.



Fits:
Porsche 911 1965-73
Porsche 912

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133156100

The product you are viewing cross references to these numbers

Rear Wheel Bearing Cover Plate.

Fits:
Porsche 911 1974-89 (not Turbo)

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133156130

The product you are viewing cross references to these numbers