Wheel Bearings & Kits
Refine by Car Type
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Filter by brand
WBEARINGKIT03
Product Information
2 sets required per car
Fits:
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912E - 1976
Porsche 914-6 - 1970 to 1976
Kit Includes:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT03
The product you are viewing cross references to these numbers
Product Information
Wheel bearing kit for front axle2 sets required per car
Fits:
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912E - 1976
Porsche 914-6 - 1970 to 1976
Kit Includes:
2 x Taper roller bearing (inner and outer)
1 x Wheel bearing radial seal
1 x Wheel bearing spacer ring
1 x Wheel bearing spacer ring O-ring
Diagram ref no 23, 24, 29, 27 and 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT03
99970108450
90134162300
477405641
9990599800
99905906500
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Wheel bearing Front Kit. Porsche 356C / 911 / 914 / 924 / 944 (99905906500/1
1 x Wheel bearing spacer. Porsche 911 / 912 / 930 / 914 (90134162300/1
1 x O-ring wheel bearing spacer ring. Porsche 911 / 914 (99970108450
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
£46.45 inc. VAT
Now £42.00 inc. VAT
In Stock - 24 Hour Dispatch
WBEARINGKIT01
Product Information
REAR WHEEL BEARING KIT (10 PARTS)
Includes:
2 X WHEEL BEARING O-RING
2 X INNER BEAR SEAL
2 X WHEEL BEARING SEAL OUTER
2 X WHEEL BEARING REAR OUTER
2 X WHEEL INNER BEARING
Fits:
Porsche 911/912 1965 - 1968
Diagram Ref No 10, 11, 9, 6, 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT01
The product you are viewing cross references to these numbers
Product Information
Wheel Bearing KIT REAR (10 PARTS) Porsche 911 1965-68 Fits both sides Left & Right REAR WHEEL BEARING KIT (10 PARTS)
Includes:
2 X WHEEL BEARING O-RING
2 X INNER BEAR SEAL
2 X WHEEL BEARING SEAL OUTER
2 X WHEEL BEARING REAR OUTER
2 X WHEEL INNER BEARING
Fits:
Porsche 911/912 1965 - 1968
Diagram Ref No 10, 11, 9, 6, 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT01
99970109150
90011301150
99911308540
90005203000
90133102600
9001130115A
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Rear wheel bearing seal outer. Porsche 911/912 1965-68 (99911308540/1
2 x O-ring (99970109150
2 x Outer wheel bearing rear axle. Porsche 911 1965-68 (90005203000/1
2 x Wheel inner bearing rear. Porsche 911 1965-68 (90133102600/8
2 x Rear trailing arm inner bearing seal. Porsche 911 1965-68 (9001130115A
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
£261.50 inc. VAT
Now £238.12 inc. VAT
In Stock - 3- 5 Days Dispatch
WBEARINGKIT02
Product Information
2 sets required per car
Fits:
Porsche 911 Turbo (1975 - 1989)
Porsche 911 Carrera (1984 - 1989) M491 Turbo Look only
Click 'Zoom in' for large parts diagram.
Diagram ref no 7A, 7B, 7C, 7D, 7E, 24 and 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT02
The product you are viewing cross references to these numbers
Product Information
Bearing set for rear axle comprising: 2x taper roller bearing, 2x shaft sealing ring, 1x spacer sleeve, 1x castle nut, 1x cotter pin.2 sets required per car
Fits:
Porsche 911 Turbo (1975 - 1989)
Porsche 911 Carrera (1984 - 1989) M491 Turbo Look only
Click 'Zoom in' for large parts diagram.
Diagram ref no 7A, 7B, 7C, 7D, 7E, 24 and 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT02
PCG93005900
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Drive shaft sealing ring. Porsche 911 (930) Turbo (99911323540/1
1 x Tapper roller wheel bearing REAR Outer. Porsche 911 Turbo 1975-89 (99905905600/1
1 x Wheel Bearing Spacer Sleeve REAR. Porsche 911 Turbo 1975-89 (93033160901/1
1 x Tapper roller wheel bearing REAR Inner. Porsche 911 Turbo 1975-89 (99905904700/1
1 x Drive shaft sealing ring. Porsche 911 (930) Turbo (99911321840/1
1 x Rear wheel hub castle nut. Porsche 911 / 912 / 914 (90133280601
1 x Rear wheel hub cotter pin. Porsche 911 / 912 / 914 (N0125381
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£184.96 inc. VAT
Now £169.38 inc. VAT
Orderable - 7 to 10 Days
9990530530A
Product Information
PCG.331.053.20
PCG.331.054.20
Fits:
Porsche 911 1970-76
Diagram ref no 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9990530530A
The product you are viewing cross references to these numbers
Product Information
Angular-contact bearing. Rear axle - oversize PCG.331.053.20
PCG.331.054.20
Fits:
Porsche 911 1970-76
Diagram ref no 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9990530530A
9990530530A
99905305300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Price: £441.18 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
9990530530A/1
Product Information
PCG.331.053.20
PCG.331.054.20
Fits:
Porsche 911 1970-76
Diagram ref no 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9990530530A
The product you are viewing cross references to these numbers
Product Information
Angular-contact bearing. Rear axle - oversize PCG.331.053.20
PCG.331.054.20
Fits:
Porsche 911 1970-76
Diagram ref no 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9990530530A
9990530530A
99905305300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£310.31 inc. VAT
Now £279.28 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PCG04311000
Product Information
Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG04311000
The product you are viewing cross references to these numbers
Product Information
Bearing grease (200 g)Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG04311000
PCG04311000
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Price: £21.18 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99911321840
Product Information
58 x 81.2 x 5
REAR INNER SEALING RING
Fits:
Porsche 911 (930) Turbo 1975-89
Click 'zoom in' for large parts diagram.
Diagram ref no 12.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911321840
The product you are viewing cross references to these numbers
Product Information
Drive shaft sealing ring.58 x 81.2 x 5
REAR INNER SEALING RING
Fits:
Porsche 911 (930) Turbo 1975-89
Click 'zoom in' for large parts diagram.
Diagram ref no 12.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911321840
19404
99911321840
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: £40.87 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
99911321840/1
Product Information
This seal fits around the rotating shaft or axle interface (typically within the rear wheel hub or drive-axle assembly) to keep lubricant contained and prevent dirt, moisture, and debris from entering. Its exact fit and high-quality materials ensure optimal lubrication, minimize wear, and extend the life of surrounding bearings and gears.
Fits:
Porsche 911 (930) Turbo 1975 - 1989
Diagram ref no 12.
• Dimension: Designed to replace the factory shaft or wheel hub seal (measuring 58 × 81.2 × 5 mm)
• Position: Rear wheel hub / drive-shaft bearing interface
• Benefit: Superior fit and sealing durability to maintain lubrication and protect drivetrain bearings and gears.
With time, heat, constant rotation, and oil exposure can cause the seal material to harden or crack. Once compromised, it allows lubricant to leak and contaminants to enter, leading to excessive bearing or gear wear and potential drivetrain failure.
When to Replace:
• During rear axle or differential servicing, or when removing the drive shaft or hub.
• If you notice oil or grease leaks around the axle, hub, or trailing arm area.
• As part of preventive maintenance on high-mileage or performance-driven Porsche models.
Replacing restores proper fit, material integrity, and sealing performance - protecting your drivetrain and extending component life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911321840
The product you are viewing cross references to these numbers
Product Information
Drive shaft sealing ring, 58 x 81.2 x 5. REAR INNER SEALING RINGThis seal fits around the rotating shaft or axle interface (typically within the rear wheel hub or drive-axle assembly) to keep lubricant contained and prevent dirt, moisture, and debris from entering. Its exact fit and high-quality materials ensure optimal lubrication, minimize wear, and extend the life of surrounding bearings and gears.
Fits:
Porsche 911 (930) Turbo 1975 - 1989
Diagram ref no 12.
• Dimension: Designed to replace the factory shaft or wheel hub seal (measuring 58 × 81.2 × 5 mm)
• Position: Rear wheel hub / drive-shaft bearing interface
• Benefit: Superior fit and sealing durability to maintain lubrication and protect drivetrain bearings and gears.
With time, heat, constant rotation, and oil exposure can cause the seal material to harden or crack. Once compromised, it allows lubricant to leak and contaminants to enter, leading to excessive bearing or gear wear and potential drivetrain failure.
When to Replace:
• During rear axle or differential servicing, or when removing the drive shaft or hub.
• If you notice oil or grease leaks around the axle, hub, or trailing arm area.
• As part of preventive maintenance on high-mileage or performance-driven Porsche models.
Replacing restores proper fit, material integrity, and sealing performance - protecting your drivetrain and extending component life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911321840
99911321840
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£15.54 inc. VAT
Now £13.99 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99911323540
Product Information
65 x 85 x 8
REAR OUTER SEALING RING
Fits:
Porsche 911 (930) Turbo 1975-89
Click 'zoom in' for large parts diagram.
Diagram ref no 11.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911323540
The product you are viewing cross references to these numbers
Product Information
Drive shaft sealing ring. 65 x 85 x 8
REAR OUTER SEALING RING
Fits:
Porsche 911 (930) Turbo 1975-89
Click 'zoom in' for large parts diagram.
Diagram ref no 11.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911323540
19405
99911323540
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: £21.28 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
99911323540/1
Product Information
Shaft sealing ring, also commonly referred to as a drive shaft or outer seal, that sits around a rotating shaft or axle in the rear differential/axle assembly. Its primary function is to keep gear oil or differential lubricant contained while preventing contamination from entering the assembly.
Fits:
Porsche 911 (930) Turbo 1975 - 1989
Diagram ref no 11.
• Dimension: Manufactured to replicate the original Porsche part’s critical dimensions (65 × 85 × 8 mm)
• Position: Outer drive-shaft or axle tube interface, rear differential assembly
• Benefit: Accurate dimensions & material matching for proper sealing and long life
Over time, the original seal may harden, crack, or fail under heat, oil exposure and axle rotation, leading to oil leakage, differential lubricant loss or contamination ingress—potentially accelerating bearing or gear wear.
When to Replace:
• During rear axle or differential service, especially when removing the drive-shaft/cross-tube.
• If you observe lubricant leaking from around the outer axle or trailing arm area, or cleaned-up oil traces near the seal.
• As part of preventative maintenance when rebuilding suspensions or axles, especially in Turbo-Look or high-performance 911 models
Replacing with a new seal restores correct internal lubrication, prevents leakage and protects drivetrain components for the long term.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911323540
The product you are viewing cross references to these numbers
Product Information
Drive shaft sealing ring,
65 x 85 x 8. REAR OUTER SEALING RINGShaft sealing ring, also commonly referred to as a drive shaft or outer seal, that sits around a rotating shaft or axle in the rear differential/axle assembly. Its primary function is to keep gear oil or differential lubricant contained while preventing contamination from entering the assembly.
Fits:
Porsche 911 (930) Turbo 1975 - 1989
Diagram ref no 11.
• Dimension: Manufactured to replicate the original Porsche part’s critical dimensions (65 × 85 × 8 mm)
• Position: Outer drive-shaft or axle tube interface, rear differential assembly
• Benefit: Accurate dimensions & material matching for proper sealing and long life
Over time, the original seal may harden, crack, or fail under heat, oil exposure and axle rotation, leading to oil leakage, differential lubricant loss or contamination ingress—potentially accelerating bearing or gear wear.
When to Replace:
• During rear axle or differential service, especially when removing the drive-shaft/cross-tube.
• If you observe lubricant leaking from around the outer axle or trailing arm area, or cleaned-up oil traces near the seal.
• As part of preventative maintenance when rebuilding suspensions or axles, especially in Turbo-Look or high-performance 911 models
Replacing with a new seal restores correct internal lubrication, prevents leakage and protects drivetrain components for the long term.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911323540
19405
99911323540
999 113 235 40
999.113.235.40
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: £15.00 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90134166100
Product Information
Fits:
Porsche 911 1965-68
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134166100
The product you are viewing cross references to these numbers
Product Information
Front knuckle spacer ring. Fits:
Porsche 911 1965-68
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134166100
90133102600
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Price: £57.13 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91134166300
Product Information
2 required, sold each.
Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134166300
The product you are viewing cross references to these numbers
Product Information
Front outer wheel bearing thrust washer. 2 required, sold each.
Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134166300
91134166300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 912E 4CYL 1976
Price: £5.91 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91134166300/1
Product Information
2 required, sold each.
Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134166300
The product you are viewing cross references to these numbers
Product Information
Front outer wheel bearing thrust washer. Left or Right; 18mm spindles.2 required, sold each.
Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134166300
91134166300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 912E 4CYL 1976
£5.95 inc. VAT
Now £5.35 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
477405641
Product Information
Sold each - 2 required per car
Fits:
Porsche 356 C 1963-65
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 928 1978-95
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Diagram ref no 43
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477405641
The product you are viewing cross references to these numbers
Product Information
Front Wheel Hub Radial Seal. 45 X 62 X 12Sold each - 2 required per car
Fits:
Porsche 356 C 1963-65
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 928 1978-95
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Diagram ref no 43
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477405641
477405641
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Price: £18.23 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Price: £4.78 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99970108450
Product Information
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Porsche 914 - 1970 to 1976
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970108450
The product you are viewing cross references to these numbers
Product Information
O-ring wheel bearing spacer ring - 25,3 x 2,4Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Porsche 914 - 1970 to 1976
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970108450
99970108450
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Price: £1.95 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
About Wheel Bearings & Kits
Porsche Wheel Bearings & Kits | Design911 Suspension Components for Smooth Rotation, Precision & Safety
Wheel bearings are critical components within your Porsche’s suspension and axle assembly, ensuring smooth, friction-free rotation of the wheels. They support the vehicle’s weight while allowing the wheels to spin precisely and quietly at high speeds. Properly functioning bearings contribute to stability, ride comfort, and predictable handling — all essential for maintaining the performance and safety your Porsche is known for.
At Design911, we supply a complete selection of wheel bearings and bearing kits, engineered for precision fitment, strength, and longevity. Each bearing set is crafted from premium-grade materials and designed to meet the high-performance demands of both classic and modern Porsche models. Whether for routine maintenance, performance upgrades, or full restoration, our range ensures your Porsche delivers a quiet, stable, and confident ride.
What Do Wheel Bearings Do?
Wheel bearings enable the wheels to rotate smoothly around the hub while supporting vertical and lateral loads.
Core Functions:
• Allow free and precise wheel rotation with minimal friction.
• Support vehicle weight while maintaining wheel alignment.
• Reduce vibration, noise, and rolling resistance.
• Enhance cornering stability and braking performance.
• Protect suspension and hub components from excessive wear.
High-quality bearings ensure quiet operation and smooth performance, providing the secure, agile driving dynamics that Porsche drivers demand.
Why Do Wheel Bearings Fail or Degrade?
Wheel bearings operate under high load, temperature, and rotational stress — eventually leading to wear or damage.
Common Causes of Failure Include:
• Contamination from water, dirt, or road debris.
• Loss of lubrication or grease degradation.
• Corrosion or pitting of the bearing races.
• Impact damage from potholes or kerbs.
• Wear due to age or improper installation torque.
When wheel bearings fail, symptoms can include humming noises, vibration, wheel play, or uneven tyre wear — all of which reduce handling precision and driving safety.
Why Replace or Upgrade Your Porsche Wheel Bearings?
Replacing worn wheel bearings restores smooth, quiet operation and ensures stable, predictable handling. Upgraded bearing kits offer increased durability for high-performance or track-driven vehicles.
Key Benefits:
• Eliminates vibration, wheel play, and noise.
• Restores precise steering and suspension stability.
• Improves safety, grip, and cornering confidence.
• Available as complete front or rear bearing kits for Porsche models.
• Fits Porsche 911, 944, 968, Boxster, Cayman, Cayenne, Panamera, and Macan.
• Ideal for maintenance, restorations, or high-performance upgrades.
Design911’s Porsche wheel bearings and kits are engineered for accuracy, durability, and performance — ensuring your Porsche runs as smooth and stable as the day it left the assembly line.
Highlights
• Premium Porsche wheel bearings and complete bearing kits.
• Precision-engineered for quiet, friction-free rotation.
• Restores handling, steering accuracy, and ride comfort.
• Manufactured from high-strength, wear-resistant materials.
• Suitable for both classic and modern Porsche models.
• Perfect for servicing, performance tuning, or full restorations.
You may also like
-
Anti Roll Bar
-
Anti Roll Bar Bushes
-
Anti Roll Bar Bracket
-
Ball Joints
-
Drop Links & Bushes FRONT
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Shock Absorber Parts REAR
-
Track Control Arms FRONT
-
Track Control Arm REAR
-
Hub Nut
-
Wishbones & bushes
-
Torsion Bar
-
Spring Plate
-
Rear Trailing Arm
-
Cross Member & Parts
-
Wheel Hub / Carrier
-
SuperPro Polyurethane Bushes
-
Powerflex Heritage Collection
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Popular Models
