Lambda Sensors / Probes
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
M 18 x 1,5 x 18
23mm in length
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
333660211
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50

Fits:
Exhaust Gas
Porsche 911 1978>>1989
Porsche 964 1989>>1994
Porsche 924S 1986>>1988
Porsche 944 1985>>1991
Porsche 928 S2 1983>>1986
Inlet Manifold
Porsche 955 Cayenne 3.2L V6 2003>>2006
Diagram Ref No 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
034133335D
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 928S2 4.7L 1984-86


Fits:
Porsche 911 G 1980-84 US with Cat
Here you will receive a housing for the lambda sensor plug of your Porsche 911 3.0 US model from 1980 to 1984. This plug housing is for the unheated lambda sensor with a single pole plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7306
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L


Fits:
Porsche 911 2.0ltr - 1965 to 1968
Porsche 911 2.2ltr - 1969 to 1971
Porsche 911 2.4ltr - 1974 to 1977
Porsche 911 3.0ltr - 1978 to 1983
Description
The Lambda UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) CAN controller is a highly advanced broadband lambda controller designed for a Bosch LSU 4.9 broadband lambda probe. The sensor measures the oxygen level in the exhaust at a rate of 2000 samples/sec and converts this to a lambda value.
Connecting the KMS Lambda UEGO CAN controller is very easy thanks to the supplied wiring harness. The wiring harness contains the connections for the lambda probe, ground, analog output and CAN-bus output with which the controller can communicate.
A complete set for use with our MD35 or MP25 , the set includes:
- Lambda controller
- Wiring
- Superseal connector 3-pin
- 0,5m Canbus connection cable
- Weldbung
- 4.9 Bosch lambda probe
- Instruction manual
Features:
- Independent use with our KMS CAN displays
- Suitable for all types of fuel (gasoline, diesel, E85, methanol, etc.)
- Uses a modern Bosch LSU 4.9 broadband lambda sensor
- Analog and CAN communication
- Operating range from 0.65 to 1.5 Lambda (9.5 to 22.1 Air/fuel ratio)
- Controlled temperature of the lambda probe from 810°C ±10°C
- High sample rate of 2000Hz
- LED light on the housing for easy troubleshooting
- Water resistant
- Compact design
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)


Fits:
Porsche 911 1978-83 SC
Porsche 924 1980-85 (including Turbo)
Porsche 928 1980-82 4.5L
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Driveability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160612300
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 928 4.5L 1978-82


Fits:
Porsche 911 1984-86
Porsche 928 1983-86
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Driveability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92860612400
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 928S2 4.7L 1984-86


Fits:
Porsche 911 1984-86
Porsche 928 1983-86
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92860612400
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 928S2 4.7L 1984-86


Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 964 Turbo 3.3 08/90-09/93
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96560612601
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93


Fits:
Porsche 911 1984-89
Porsche 964 1989-94
Porsche 964 Carrera RS 3.6 06/91-09/93
Porsche 964 Turbo 3.3 08/90-09/93
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96560612601
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93

Fits:
Porsche 911 1987-89
Porsche 964 1989-94
Porsche 928 1983-95
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Driveability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96560612601
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Lambda sensors (also widely known as Oxygen sensors) on your Porsche are fitted to measure the oxygen level in the emission gasses. They are designed to help your Porsche's engine to constantly monitor the efficiency of your cats and fuel to air ratio in the intake system to help the engine run smoothly. If one of those sensors was to fail on your Porsche it could trigger poor performance and abnormally higher emissions from your engine.
It is also advised to get new oxygen sensors if you are up for a change of the exhaust system on your car as often the thread shears off and refit of old sensors is not possible.