Oil Radiators / Heat Exchangers

Oil cooler racing version left hand front. 



Fits:
Porsche 911 ST / RSR

Dimensions:

Power measurement - 280x190x52mm
External dimension - 380x195x52mm
Connections - M30 x 1.5 or M26 x 1.5 outside

Air duct diverter plate centre oil cooler. 



Fits:
Porsche 911 / 930 - 1974 to 1989

Optimize Airflow for Maximum Cooling Efficiency
Enhance your center-mount oil cooler setup with this air duct, designed to sit behind the cooler. It creates a streamlined exit path for air, significantly improving airflow and boosting cooling performance.

RS/RSR Diverter Plate Replica
This oil cooler panel is a precise replica of the original RS/RSR diverter plate. Installed by cutting out the front of the tub and welding the panel in place, it securely mounts the oil cooler. Air enters from the front, passes through the cooler, and is efficiently diverted downward. Some trimming may be required for a perfect fit. Compatible with 1974-89 911/912/930 models.

Auxiliary Fan for Front Oil Cooler. Only in combination with bracket part number PCG62410400 (position 42 on diagram).



Fits:
Porsche 911 1984-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 41

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91162412101

The product you are viewing cross references to these numbers

Bracket for Front Oil Cooler Auxiliary Fan part no 91162412101



Fits:
Porsche 911 1984-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 42

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG62410400

The product you are viewing cross references to these numbers

Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling

Fits
911/930 models up to 1989

RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units

These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling

Product Features:

•High Efficiency & Rugged Durability Bar/Plate Design

• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8201

The product you are viewing cross references to these numbers

Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W

Fits:
Porsche 911/930 models up to 1989

RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units

These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling

Product Features:

•High Efficiency & Rugged Durability Bar/Plate Design

• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8202

The product you are viewing cross references to these numbers

Cover plate for oil cooler, RIGHT, incl gaskets.

Fits:
Porsche 911S 2.0 1969
Porsche 911S 2.2 1970-71

Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110708500

The product you are viewing cross references to these numbers

Cover plate for oil cooler, RIGHT



Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110708500

The product you are viewing cross references to these numbers

Engine oil cooler suction hose.

Fits:
Porsche 911 T-E/E/S 1972
Porsche 911 T-V 1972

Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120731802

The product you are viewing cross references to these numbers

Engine oil cooler suction hose.

Fits:
Porsche 911 T-E/E/S 1972
Porsche 911 T-V 1972

Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120731802

The product you are viewing cross references to these numbers

Oil cooler distance bushing.


Fits:
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6161075420Y

The product you are viewing cross references to these numbers

Oil cooler distance bushing.



Fits:
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6161075420Y

The product you are viewing cross references to these numbers