Drop links Rear

These 2 coupling rods (L+R) are for the stabilizer linkage on the rear axle
for Porsche 911 G SC Stabilizer rear axle UNIBALL

Replacement for 93033307100, 93033307101, 93033307200, 93033307201



Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66

Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1161

The product you are viewing cross references to these numbers

Adjustable rear drop link kit.
1 kit required per car

Fits
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989

Upgrade your factory rear swaybar (anti roll bar) with our adjustable drop links.
These attach to the camber adjustment holes on the spring plates.

Teflon-lined precision rod ends for added durability and increased articulation.

Fully weather-sealed to extend bearing life



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2271002

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Anti Roll Bar Bush Rear.

SET OF 4



Rear stabilizer bar bush - 15mm.
Rear drop link bush - 15mm.
Fits - left and right side.

Fits:
Porsche 911 1965-73 Rear
Porsche 914 1970-76 Rear

Note: Please check anti roll bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-15H

The product you are viewing cross references to these numbers

Powerflex Heritage Anti Roll Bar Bush Rear.
Replacement for Porsche parts No. 90133379304.

SET OF 4



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16H

The product you are viewing cross references to these numbers

Performance Rear Drop Link Set, +30% Increased Rubber Hardness.
Upgrade your rear suspension linkage with this performance drop link set specifically designed for the Porsche 911 / 930 (1978-1989). Both left & right links included. Featuring stiffer rubber bushes with a 30 % increase in hardness versus stock, this set provides a stronger, more direct connection between the rear stabiliser bar and suspension arms — delivering sharper handling, reduced body roll, and improved rear-end feel under load. Ideal for spirited road driving, track use or any build where precision handling matters.

Fits:

• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram Ref No 12

What This Product Does:

• The rear drop links connect the rear anti-roll bar (stabiliser bar) to the rear suspension arms/axle. When the car corners, the anti-roll bar helps keep the body flatter by transferring load between wheels; the linkage must be rigid and responsive for full effect.
• By increasing the rubber hardness in the bushes by 30 % over standard, the link is less prone to flex, deformation or movement under load. This means the stabiliser bar engages more effectively, quicker and with less lost motion.
• The upgrade therefore yields sharper rear-end response, less body roll, better handling stability, particularly under spirited driving or track use.

Symptoms & Signs You Might Need It:

• You experience clunking or knocking noises from the rear suspension when going over bumps or during cornering — typical of worn drop link joints or flexible bushes.
  
• The car displays excess rear body roll, or the rear end feels less controlled in transitions — possibly the stabiliser bar isn’t transmitting force effectively due to soft/link compliance.
  
• You’ve upgraded other components (e.g., stronger springs, larger tyres, lowered ride height) but the rear still doesn’t feel tight — the stock links may be the weak link.
• The existing links have rubber bushes that are cracked, collapsed, excessively soft or you detect play in the link.
• Visual inspection of the rear links shows degraded bushings, movement under load, or the mounts appear worn.

Why This Upgrade Matters:

• Handling precision: With the stiffer bushes, the drop links provide a firmer connection, meaning the stabiliser bar is engaged earlier and more completely — improving turn-in, chassis balance and cornering feel.
• Complements suspension upgrades: If the rest of the suspension has been improved (e.g., springs, dampers, sway bar) then a stronger link makes sure the stabiliser bar isn’t held back by weak link hardware.
• Longevity and durability: The upgrade is likely to resist wear, deformation and fatigue better than standard softer bushings, thus maintaining performance over time.
• Value and driving enjoyment: For performance-oriented or track-use cars, the handling benefit is real. Even for road use, more solid links reduce movement, improve feedback and instil driver confidence.
• Prevents secondary issues: Poor drop links can lead to uneven tyre wear, shifting geometry or looseness — upgrading helps avoid these costly or dangerous side-effects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033307X01

The product you are viewing cross references to these numbers

Performance Rear Anti Roll Bar Drop Link
SET OF 2 Left & Right
SPORT variant with +30% increased rubber hardness from the OE 93033307101 & 93033307201

Fits:
Porsche 911 - 1978 to 1989
Porsche 930 Turbo 3.3ltr - 1978 to 89

Anti-Roll Bar Drop Links using stiffer bushes aimed at Performance and track driving.

Click 'Zoom in' for large parts diagram.
Diagram ref no 12.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033307101+201

The product you are viewing cross references to these numbers

Powerflex Anto Roll Bar Bush Rear.

SET OF 4



Rear stabilizer bar bush - 15mm.
Rear drop link bush - 15mm.
Fits - left and right side.

Fits:
Porsche 911 1965-1973 Rear
Porsche 914 1970-1976 Rear

Note: Please check anti roll bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-15

The product you are viewing cross references to these numbers

Powerflex Stabilizer Bar Bush Rear.
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.



SET OF 4

Replacement for Porsche parts No. 91133379302

Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-18

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bush Rear.
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.



SET OF 4

Replacement for Porsche parts No. 91133379302.

Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-18BLK

The product you are viewing cross references to these numbers