Distributor
Refine by Car Type
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Filter by brand
IGNITIONKITCIS
Product Information
Fits
Porsche 911 2.7 1974 - 1977
Porsche 911 2.7S 1974 - 1977
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITCIS
The product you are viewing cross references to these numbers
Product Information
Ignition kit for CIS injection car with 3 pin Gen 6 CDI (HKZ) module. Porsche 911 2.7, 2.7SFits
Porsche 911 2.7 1974 - 1977
Porsche 911 2.7S 1974 - 1977
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITCIS
91160270700
91160270700
90160250200
911602021
90160250200
911MF126
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 3 Pin CDI ignition module. Porsche 911 / 914/6 1965-77 premium version (91160270700/3
1 x Distributor and harness for Porsche 911 2.7 ltr with CIS injection engines 1974-1977 (911602021/2
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (90160250200/3
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£1,369.00 inc. VAT
Now £1,300.55 inc. VAT
Stock Due
Shop Securely
12 Month Warranty
Worldwide Delivery
IGNITIONKITMFI
Product Information
Fits
Porsche 911 2.4 T 1970 - 1973
Porsche 911 2.4 E 1970 - 1973
Porsche 911 2.4 S 1970 - 1973
Porsche 911 2.7 MFI 1973 - 1974
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITMFI
The product you are viewing cross references to these numbers
Product Information
Ignition kit for MFI car with 3 pin Gen 6 CDI (HKZ) module. Porsche 911 2.4 T / E / S and 2.7 MFIFits
Porsche 911 2.4 T 1970 - 1973
Porsche 911 2.4 E 1970 - 1973
Porsche 911 2.4 S 1970 - 1973
Porsche 911 2.7 MFI 1973 - 1974
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITMFI
91160270700
91160270700
90160250200
911602021
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 3 Pin CDI ignition module. Porsche 911 / 914/6 1965-77 premium version (91160270700/3
1 x Distributor and harness Porsche 911 with MFI engines (911602021/1
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (90160250200/3
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£1,339.00 inc. VAT
Now £1,272.05 inc. VAT
Due In 22 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
IGNITIONKIT9E
Product Information
Fits
Porsche 911 2.0ltr 1965 - 1969
Porsche 911 2.2ltr 1970 - 1972
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKIT9E
The product you are viewing cross references to these numbers
Product Information
Ignition kit with 3 pin Gen 6 CDI (HKZ) module. Porsche 911 2.0ltr and 2.2LtrFits
Porsche 911 2.0ltr 1965 - 1969
Porsche 911 2.2ltr 1970 - 1972
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
3 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
The Gen 6 Premium Perma-Tune CDI module makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights.
These LED lights assist in diagnosing both the ignition module and the car. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light which is especially useful for detecting engine misfire.
The LED function lights are mounted in the harness electrical connector and can only be seen with a mirror while the module is powered up.
As an additional feature of the Perma-Tune Premium module, there are three self-resetting overload protectors that protect your Perma-Tune and your car from overload damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part.
Distributor with Harness
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear. Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor, for the 2.0 L and 2.2 L engine. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires. The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
The Perma-Tune Bespoke Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions. It just doesn't get any easier than this.
Ignition Coil
The Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a vintage car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKIT9E
91160270700
90160250200
911602021
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 3 Pin CDI ignition module. Porsche 911 / 914/6 1965-77 premium version (91160270700/3
1 x Distributor and harness for Porsche 911 2.0 / 2.2ltr and 914/6 1968-1972 (911602021/3
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (90160250200/3
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£1,180.95 inc. VAT
Now £1,121.90 inc. VAT
Stock Due
Shop Securely
12 Month Warranty
Worldwide Delivery
IGNITIONKITSCB
Product Information
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Basic
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models: Premium ignition module and the Basic ignition module. The Basic model is just that, basic: it performs only the same functions as the analog modules did back in the day. For the average street car, this may be all that is desired and of course is more affordable than the Premium model. It is however still a high performance part and is perfect for racing venues that do not allow programmable digital ignition systems. The Basic model has a smooth, more original looking housing than the Gen 5 cast housing.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCB
The product you are viewing cross references to these numbers
Product Information
Ignition kit with basic 6 pin CDI (HKZ) module. Porsche 911SC and turboFits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Basic
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models: Premium ignition module and the Basic ignition module. The Basic model is just that, basic: it performs only the same functions as the analog modules did back in the day. For the average street car, this may be all that is desired and of course is more affordable than the Premium model. It is however still a high performance part and is perfect for racing venues that do not allow programmable digital ignition systems. The Basic model has a smooth, more original looking housing than the Gen 5 cast housing.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCB
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 6 Pin CDI ignition module. Porsche 911 911 turbo (USA) 1978-89 basic version (93060270200/4
1 x Distributor and harness for Porsche 911 SC and 911 turbo (USA) 1978-1989 (930602021DX/1
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (90160250200/3
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,419.00 inc. VAT
Now £1,348.05 inc. VAT
Due In 27 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
IGNITIONKITSCG5
Product Information
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 5
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Gen 5 Version
Distributor with Harness
Ignition Coil
CDI Module
The Generation 5 ignition boxes make diagnostics easier. The controller monitors and runs diagnoses programs automatically and is read by two coloured LED function lights the are viewable from underneath the unit. The diagnoses can also be done via a Bluetooth programming dongle which is available as a separate item.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCG5
The product you are viewing cross references to these numbers
Product Information
Ignition kit with 6 pin Gen 5 CDI (HKZ) module. Porsche 911SC and turboFits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 5
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Gen 5 Version
Distributor with Harness
Ignition Coil
CDI Module
The Generation 5 ignition boxes make diagnostics easier. The controller monitors and runs diagnoses programs automatically and is read by two coloured LED function lights the are viewable from underneath the unit. The diagnoses can also be done via a Bluetooth programming dongle which is available as a separate item.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCG5
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 6 Pin CDI ignition module. Porsche 911 911 turbo (USA) 1978-89 basic version (93060270200/4
1 x Distributor and harness for Porsche 911 SC and 911 turbo (USA) 1978-1989 (930602021DX/1
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (90160250200/3
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,419.00 inc. VAT
Now £1,348.05 inc. VAT
Due In 27 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
IGNITIONKITSCP
Product Information
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models:Premium ignition module and the Basic ignition module.
The Premium ignition module features a smooth, matt finish that mimics the patina of the original aluminum die cast part. It provides full control over RPM limit, mechanical advance timing, power output, multi spark function and has many other features that can be programmed using a computer, tablet or smart phone. This module comes preprogrammed for the Porsche 911SC so programming changes are optional. The Gen 6 Premium Perma-Tune makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights. These LED lights assist in diagnosing both the vehicle and the ignition module. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light. This LED is especially useful for detecting intermittent engine misfire caused by wiring or distributor problems. The LED function lights are mounted in the harness electrical connector and can only be seen when the module is powered up. There are three self-resetting overload protectors that assist in troubleshooting while protecting your Perma-Tune from damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part. Refer to the Diagnostics section of this web site for more information about the diagnostics system and overload protectors.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCP
The product you are viewing cross references to these numbers
Product Information
Ignition kit with Premium 6 pin CDI (HKZ) module. Porsche 911SC and turboFits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models:Premium ignition module and the Basic ignition module.
The Premium ignition module features a smooth, matt finish that mimics the patina of the original aluminum die cast part. It provides full control over RPM limit, mechanical advance timing, power output, multi spark function and has many other features that can be programmed using a computer, tablet or smart phone. This module comes preprogrammed for the Porsche 911SC so programming changes are optional. The Gen 6 Premium Perma-Tune makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights. These LED lights assist in diagnosing both the vehicle and the ignition module. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light. This LED is especially useful for detecting intermittent engine misfire caused by wiring or distributor problems. The LED function lights are mounted in the harness electrical connector and can only be seen when the module is powered up. There are three self-resetting overload protectors that assist in troubleshooting while protecting your Perma-Tune from damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part. Refer to the Diagnostics section of this web site for more information about the diagnostics system and overload protectors.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCP
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 6 Pin CDI ignition module. Porsche 911 / 911 turbo (USA) 1978-89 premium version (93060270200/3
1 x Distributor and harness for Porsche 911 SC and 911 turbo (USA) 1978-1989 (930602021DX/1
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (90160250200/3
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,479.00 inc. VAT
Now £1,405.05 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90160202520/1
Product Information
Product Information
12 plug distributor, Bosch style. Porsche 911 1972 to 1989Rotates clockwise
Fits:
Porsche 911 - 1972 to 1989
Excluding 911 SC 3.0ltr
This distributor is made in the historical design of the original Bosch 3.0 RSR ignition distributor and combines the latest technology with an authentic look.
The ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices but it fits all engines from 1972 to 1989, so from the 2.4ltr to the 3.2 Carrera
This ignition distributor rotates clockwise, so for all engines except 911 SC 3.0ltr
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
£2,806.00 inc. VAT
Now £2,665.70 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90160202510/1
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160202510
The product you are viewing cross references to these numbers
Product Information
12 plug distributor, Bosch style. Anticlockwise rotation
Fits:
Porsche 911 SC - 1978 to 1983
This distributor is made in the historical design of the original Bosch 3.0 RSR ignition distributor and combines the latest technology with an authentic look.
The ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices and fits the 911 SC 3.0ltr
This ignition distributor rotates anti-clockwise.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160202510
90160202500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
£2,806.00 inc. VAT
Now £2,665.70 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197&height=148 "12 plug distributor, Magneti Marelli style. Porsche 911 1965 to 1971")
90160202500/2
Product Information
Product Information
12 plug distributor, Magneti Marelli style. Porsche 911 1965 to 1971
Fits:
Porsche 911 2.0ltr - 1965 to 1969
Porsche 911 2.2ltr - 1970 to 1971
This distributor is made in the historical design of the original Magneti Marelli ignition distributor and combines the latest technology with an authentic look.
It was installed at the factory on the 906, 911R, 914/6 GT and 911 ST and the ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices but it fits all engines from 1965 to 1971, so from the 2.0ltr to the 2.2ltr
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£2,806.00 inc. VAT
Now £2,665.70 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90160202500/1
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160202500
The product you are viewing cross references to these numbers
Product Information
12 plug distributor, Magneti Marelli style. Clockwise rotation
Fits:
Porsche 911 - 1972 to 1989
Excluding 911 SC 3.0ltr
This distributor is made in the historical design of the original Magneti Marelli 2.8/3.0 RSR ignition distributor and combines the latest technology with an authentic look.
It was installed at the factory on the 911 ST 2.5ltr and on the 2.8ltr 911 RSR and the ignition map is easily and freely programmable via an app and Bluetooth.
In addition, an immobilizer can be locked/unlocked with a PIN and a speed limiter can also be set easily via a smartphone.
This version requires two 3-pin HKZ devices but it fits all engines from 1972 to 1989, so from the 2.4ltr to the 3.2 Carrera
This ignition distributor rotates clockwise, so for all engines except 911 SC 3.0ltr
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160202500
90160202500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
£2,806.00 inc. VAT
Now £2,665.70 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
91135532300
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91135532300
The product you are viewing cross references to these numbers
Product Information
Connection piece brake master cylinder.
Fits:
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1975 to 1989
Connection piece for master cylinder feed pipe
Porsche 964 - 1989 to 1994
Connection union for distributor vent kit
Diagram ref no 20 (911) and 15 (964)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91135532300
91135532300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Price: £5.66 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91160296000/1
Product Information
Fits:
Porsche 911 1965 - 1973
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160296000
The product you are viewing cross references to these numbers
Product Information
Contact breaker points, for MARELLI distributors.Fits:
Porsche 911 1965 - 1973
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160296000
91160296000
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£5.95 inc. VAT
Now £5.65 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
92360202100/1
Product Information
4 Cylinder
Fits:
Porsche 912E 2.0ltr 4 Cylinder - 1976
New Perma-Tune Gen 6 unit
Replacing that worn out distributor has never been easier with the Perma-Tune distributor for the 1.6ltr 4 Cylinder engine
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires.
The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
This Perma-Tune Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions.
It just doesn't get any easier than this.
This is where the fun starts
Street tune your car for maximum performance using your smart phone.
Download the free TUNE + app to your phone and connect it to the Perma-Tune distributor via Bluetooth.
Using the TUNE + app, you can read and store the ignition curves, modify them and share them with others. The app even has an ignition lock feature that prevents unauthorized use of the car. Do more than just a onetime engine tuning. Engine programs are so easy to create and load into the car that you can make your own library of programs for different uses.
For instance, you could create a de-tuned engine program for a novice driver, a super tune program for yourself or a valet tune program for the parking attendant. Get the most from engine upgrades like headers, intake, and many other engine modifications by creating custom ignition maps.
The possibilities are endless.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92360202100
The product you are viewing cross references to these numbers
Product Information
Distributor and harness for Porsche 912E4 Cylinder
Fits:
Porsche 912E 2.0ltr 4 Cylinder - 1976
New Perma-Tune Gen 6 unit
Replacing that worn out distributor has never been easier with the Perma-Tune distributor for the 1.6ltr 4 Cylinder engine
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires.
The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
This Perma-Tune Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions.
It just doesn't get any easier than this.
This is where the fun starts
Street tune your car for maximum performance using your smart phone.
Download the free TUNE + app to your phone and connect it to the Perma-Tune distributor via Bluetooth.
Using the TUNE + app, you can read and store the ignition curves, modify them and share them with others. The app even has an ignition lock feature that prevents unauthorized use of the car. Do more than just a onetime engine tuning. Engine programs are so easy to create and load into the car that you can make your own library of programs for different uses.
For instance, you could create a de-tuned engine program for a novice driver, a super tune program for yourself or a valet tune program for the parking attendant. Get the most from engine upgrades like headers, intake, and many other engine modifications by creating custom ignition maps.
The possibilities are endless.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92360202100
912126
92360202100
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 912E 4CYL 1976
£594.17 inc. VAT
Now £564.46 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
911602021/3
Product Information
Disclaimer: Before fitting this CDI unit please make sure the new PERMA-TUNE coil is being fitted with it. Do not try to start the car with Blue Bosch coil made in Brazil. This will damage the Perma-Tune CDI box and void the warranty. If CDI unit was not purchased with the PERMA-TUNE coil the warrany will not be respected. Fitting with other brand coils at your own risk.
Fits:
Porsche 911 2.0ltr
Porsche 911 2.2ltr
Porsche 914/6
New Perma-Tune Gen 6 unit
Replacing that worn out distributor has never been easier with the Perma-Tune distributor for the 2.0ltr and 2.2ltr engine
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires.
The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
This Perma-Tune Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions.
It just doesn't get any easier than this.
This is where the fun starts
Street tune your car for maximum performance using your smart phone.
Download the free TUNE + app to your phone and connect it to the Perma-Tune distributor via Bluetooth.
Using the TUNE + app, you can read and store the ignition curves, modify them and share them with others. The app even has an ignition lock feature that prevents unauthorized use of the car. Do more than just a onetime engine tuning. Engine programs are so easy to create and load into the car that you can make your own library of programs for different uses.
For instance, you could create a detuned engine program for a novice driver, a super tune program for yourself or a valet tune program for the parking attendant. Get the most from engine upgrades like headers, intake, and many other engine modifications by creating custom ignition maps.
The possibilities are endless.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911602021
The product you are viewing cross references to these numbers
Product Information
Distributor and harness for Porsche 911 2.0lltr and 2.2ltr and 914/6 1968-1972 Disclaimer: Before fitting this CDI unit please make sure the new PERMA-TUNE coil is being fitted with it. Do not try to start the car with Blue Bosch coil made in Brazil. This will damage the Perma-Tune CDI box and void the warranty. If CDI unit was not purchased with the PERMA-TUNE coil the warrany will not be respected. Fitting with other brand coils at your own risk.
Fits:
Porsche 911 2.0ltr
Porsche 911 2.2ltr
Porsche 914/6
New Perma-Tune Gen 6 unit
Replacing that worn out distributor has never been easier with the Perma-Tune distributor for the 2.0ltr and 2.2ltr engine
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation.
Simply mount the ignition module to the relay panel where the later model cars had the module mounted and then plug the distributor harness connector into the Perma-Tune module. The power, ground, tachometer and coil connections are made at the existing coil wires. The harness has loop connections that allow joining the wires without having to cut and splice the car harness wires.
The Perma-Tune distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look.
This Perma-Tune Porsche distributor is an exact fit replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor. The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance or retard vacuum functions.
It just doesn't get any easier than this.
This is where the fun starts
Street tune your car for maximum performance using your smart phone.
Download the free TUNE + app to your phone and connect it to the Perma-Tune distributor via Bluetooth.
Using the TUNE + app, you can read and store the ignition curves, modify them and share them with others. The app even has an ignition lock feature that prevents unauthorized use of the car. Do more than just a onetime engine tuning. Engine programs are so easy to create and load into the car that you can make your own library of programs for different uses.
For instance, you could create a detuned engine program for a novice driver, a super tune program for yourself or a valet tune program for the parking attendant. Get the most from engine upgrades like headers, intake, and many other engine modifications by creating custom ignition maps.
The possibilities are endless.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911602021
914126
0231121006
0231159001
0231159002
90160202101
90160202102
90160202150
901602021AX
901603021BX
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
£596.95 inc. VAT
Now £567.10 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
911602021/2
Product Information
Fits:
Porsche 911 1974-77
Porsche 911 2.7S 1974-1977
New Perma Tune GEN 6 unit.
Bespoke distributor for the 911 engine with CIS injection and other engines like the Porsche Turbo 930 that use the three pin ignition module (CDI) and CIS injection
3 pin CDI with CIS injection was used from 1974 - 1978 on the 911
The Perma-Tune distributor is an exact fit, replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor.
The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance, retard, vacuum and boost functions. On Turbo cars the vacuum/boost timing control can is very prone to leaks and the vacuum switches and manifold boost valves connected to the can are failure prone as well.
When these parts fail, performance deteriorates and fuel is wasted. These parts are bypassed by connecting the manifold hose directly to the MAP sensor of the distributor. It just doesn't get any easier than this.
The distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look. It is very common on the Porsche 911 cars to develop engine misfire problems due to the brittle and deteriorating green shielded wire between the ignition distributor and module.
The defective wiring is replaced at the same time the new distributor is installed which cures two ills at once.
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune distributor,
There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done.
There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911602021
The product you are viewing cross references to these numbers
Product Information
Distributor and harness for 2.7ltr CIS engine with 3 PIN CDI box. Fits:
Porsche 911 1974-77
Porsche 911 2.7S 1974-1977
New Perma Tune GEN 6 unit.
Bespoke distributor for the 911 engine with CIS injection and other engines like the Porsche Turbo 930 that use the three pin ignition module (CDI) and CIS injection
3 pin CDI with CIS injection was used from 1974 - 1978 on the 911
The Perma-Tune distributor is an exact fit, replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction. Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor.
The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance, retard, vacuum and boost functions. On Turbo cars the vacuum/boost timing control can is very prone to leaks and the vacuum switches and manifold boost valves connected to the can are failure prone as well.
When these parts fail, performance deteriorates and fuel is wasted. These parts are bypassed by connecting the manifold hose directly to the MAP sensor of the distributor. It just doesn't get any easier than this.
The distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look. It is very common on the Porsche 911 cars to develop engine misfire problems due to the brittle and deteriorating green shielded wire between the ignition distributor and module.
The defective wiring is replaced at the same time the new distributor is installed which cures two ills at once.
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune distributor,
There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done.
There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911602021
911CF126
0231169011
0231184001
0231184002
0231184003
0231184004
0231184007
901602021EX
91160202103
91160202107
91160202703
911602027CX
91160203103
91160203105
91160203106
911602031CX
93060210100
930602101X
930602101 X
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£785.00 inc. VAT
Now £745.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
930602021DX/1
Product Information
Porsche 911 1978-89.
Fits:
Porsche 911 SC 1978-83
Porsche 930 3.0ltr 1975-77 (US cars only)
Porsche 930 3.3ltr 1978-89 (US cars only)
New Perma Tune GEN 6 unit.
Bespoke distributor for the 911SC 3.0ltr engine and other engines like the Porsche Turbo 930 that use the six pin ignition module (CDI) and CIS injection
6 pin CDI was used from 1978 - 1983 on 911 and 1978 - 1989 on the turbo
The Perma-Tune distributor is an exact fit, replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor.
The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance, retard, vacuum and boost functions.
On Turbo cars the vacuum/boost timing control can is very prone to leaks and the vacuum switches and manifold boost valves connected to the can are failure prone as well.
When these parts fail, performance deteriorates and fuel is wasted. These parts are bypassed by connecting the manifold hose directly to the MAP sensor of the distributor.
It just doesn't get any easier than this.
The distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look. It is very common on the Porsche 911 cars to develop engine misfire problems due to the brittle and deteriorating green shielded wire between the ignition distributor and module.
The defective wiring is replaced at the same time the new distributor is installed which cures two ills at once.
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune distributor.
There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done There is no way to make a mistake with this installation, the connectors will only plug in the right way.
The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602021DX
The product you are viewing cross references to these numbers
Product Information
Distributor and harness for 911 SC and turbo with 6 PIN CDI box. Porsche 911 1978-89.
Fits:
Porsche 911 SC 1978-83
Porsche 930 3.0ltr 1975-77 (US cars only)
Porsche 930 3.3ltr 1978-89 (US cars only)
New Perma Tune GEN 6 unit.
Bespoke distributor for the 911SC 3.0ltr engine and other engines like the Porsche Turbo 930 that use the six pin ignition module (CDI) and CIS injection
6 pin CDI was used from 1978 - 1983 on 911 and 1978 - 1989 on the turbo
The Perma-Tune distributor is an exact fit, replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor.
The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance, retard, vacuum and boost functions.
On Turbo cars the vacuum/boost timing control can is very prone to leaks and the vacuum switches and manifold boost valves connected to the can are failure prone as well.
When these parts fail, performance deteriorates and fuel is wasted. These parts are bypassed by connecting the manifold hose directly to the MAP sensor of the distributor.
It just doesn't get any easier than this.
The distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look. It is very common on the Porsche 911 cars to develop engine misfire problems due to the brittle and deteriorating green shielded wire between the ignition distributor and module.
The defective wiring is replaced at the same time the new distributor is installed which cures two ills at once.
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune distributor.
There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done There is no way to make a mistake with this installation, the connectors will only plug in the right way.
The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602021DX
0237301001
0237301002
0237301007
0237301009
0237302034
0237302045
0237303003
0237304016
0237306001
0237505001
91160202109
93060201002
93060202100
93060202102
93060202104
93060202106
93060202300
93060210400
93060292300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£845.00 inc. VAT
Now £802.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
You may also like
-
Air Mass/Flow Sensors
-
Alternator / Generator
-
Batteries & Chargers
-
Cold Start Valve
-
Distributor Cap
-
Rotor Arms / Point Sets
-
Relays / Fuses
-
Ignition Coil
-
Ignition Control Units
-
Ignition Lead Sets
-
Ignition Lead High Performance
-
Injectors
-
Starter Motors
-
Warm-up Regulator
-
Fuel Pressure Regulator
-
Idle Control Valve
-
Fuel Pump
-
Fan / Temperature Switch
-
Temperature Sensor
-
Speed / Reference / Knock Sensors
-
Wiring Harness / Cables
-
Throttle Body
Popular Models
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
