MSPORT OVAL HEAD SCREW M6X38 Genuine Porsche part WHT008791

Complete Front Lower Control Arm Kit, SET OF 2
This Front Lower Control Arm Complete Set includes both left and right lower wishbones (97034105324 + 97034105424) and all associated bushings, ball joints, and factory-style mounting hardware needed for a professional installation.
Designed for Porsche Panamera (970.2 series), this kit restores the vehicle’s factory suspension geometry, maintaining precise camber, caster, and toe alignment for exceptional handling and ride comfort. Each control arm is build to Porsche OE specifications. Features pre-installed rubber-metal bushings and sealed ball joints, ensuring smooth operation, low noise, and long service life.

Fits:
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 1 - 10, 19, 21.

The supplied OE manufactured hardware – including bolts, washers, and self-locking nuts – guarantees perfect torque retention and structural reliability under load. This complete kit provides a direct-fit, for full front suspension restoration.

• Position: Front Axle – Lower Left & Right
• Function: Connects chassis to wheel carrier, maintaining camber, caster, and toe angles
• Benefits: OE-spec geometry, full installation hardware, quiet ride, long-term reliability
• Installation: Direct-fit; replace in pairs; torque to Porsche specifications; wheel alignment required after fitting

Front lower control arms bear continuous load and articulation, and over time bushings harden and ball joints develop play, leading to clunking, vibration, and poor alignment.

Replace this full kit when:
• The vehicle shows front-end knocking or vibration over bumps
• Tires wear unevenly or steering feels loose or unstable
• Bushings or ball joints show visible wear or cracking
• Performing a front-end rebuild or geometry correction

This OE Match complete arm set provides everything required for a full, balanced restoration of your Porsche’s front suspension — delivering the crisp handling and ride comfort it had when new.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034105X24

The product you are viewing cross references to these numbers

Complete Front Lower and Upper Control Arm set, includes:
•  left + right lower wishbones  - 97034105324 + 97034105424
•  left + right upper wishbones  - 97034105123 x2
and all associated bushings, ball joints, and factory-style mounting hardware needed for a professional installation.

Designed for Porsche Panamera (970.2 series), this kit restores the vehicle’s factory suspension geometry, maintaining precise camber, caster, and toe alignment for exceptional handling and ride comfort. Each control arm is build to Porsche OE specifications. Features pre-installed rubber-metal bushings and sealed ball joints, ensuring smooth operation, low noise, and long service life.

Fits:
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 1 - 10, 19, 21 (lower)
Diagram ref no 13, 14, 15, 16 (upper)

The supplied OE manufactured hardware – including bolts, washers, and self-locking nuts – guarantees perfect torque retention and structural reliability under load. This complete kit provides a direct-fit, for full front suspension restoration.

• Position: Front Axle – Lower Left & Right +  Upper Left & Right
• Function: Connects wheel hub to chassis, maintains suspension geometry and steering stability
• Benefits: OE-style geometry, smooth steering, restored ride comfort, noise-free operation
• Installation: Direct-fit; replace in pairs; professional wheel alignment recommended after installation

Front suspension arms endure constant stress and wear from road impacts, heat, and load cycles. Worn joints or bushings can cause clunking noises, uneven tyre wear, poor handling, or steering instability.

Replace this full kit when:
• You notice vibration or play in the steering
• Bushings or ball joints show cracking or looseness
• During front-end restoration or alignment correction
• To restore precise handling and chassis balance

The complete Front Control Arm Set delivers a cost-effective, high-quality solution to refresh your Porsche Panamera’s suspension — ensuring performance, comfort, and safety return to factory standards.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034105FRSET

The product you are viewing cross references to these numbers

Complete Rear Lower track control arm set, includes:
• 1x 97033104104  (left lower wishbone)
• 1x 97033104204  (right lower wishbone)
• A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Together, these components offer a complete rear lower suspension refresh. Each control arm is manufactured to match original Porsche equipment in terms of geometry, material, bushings and mounting points - ensuring restored capability for alignment, ride comfort and handling precision.

Fits:
Porsche 970 Panamera 2010 - 2016

Diagram ref no 10, 13, 14, 15, 16, 17

• Position on Vehicle: Rear suspension, lower track control arm positions - one each side of the rear axle, connecting wheel carrier to sub-frame and controlling lateral movement under load.

• Applications: Ideal when one or both of the rear lower track arms are worn, bushings are degraded, or when performing a full rear suspension refresh to restore alignment, ride quality and handling balance.

The rear lower track control arms are crucial to maintaining accurate wheel positioning, alignment and rear-end stability under acceleration, braking and cornering. When the arms or bushings are worn, you may experience rear instability, uneven tyre wear, clunks when cornering or general degradation of handling. Replacing them restores full factory geometry, improves ride comfort and reduces wear on related suspension components.

When and why to replace:
• Noticeable play or clunking in the rear suspension under load or when driving over uneven surfaces.
• Uneven rear tyre wear or rear alignment constantly drifting out of spec.
• After replacement of other suspension components (rear bushes, track arms, shock absorbers) where access is granted.
• High-mileage Panamera where original track arms/bushings are likely fatigued.
• If you’re looking for a matched-axle solution to ensure both sides of the rear suspension perform identically, rather than replacing just one side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104X04

The product you are viewing cross references to these numbers

Complete Rear Lower and Upper Control Arm set, includes:
• 2x 97033104700 (upper control arms)
• 4x 97033104300 (upper outer track control arms)
• 1x 97033104104 (left lower wishbone)
• 1x 97033104204 (right lower wishbone)
• A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Each arm is engineered to replicate the original Porsche equipment, including correct geometry, premium bushings, and exact mounting points. The fitting kit ensures all factory-specified fasteners and alignment shims are included for a seamless install. This unified kit restores both the upper and lower rear axle linkages, giving you full axle symmetry, correct handling behaviour and reinstated ride quality.

Fits:
Porsche 970 Panamera 2010 - 2016

Diagram ref no:  8, 9, 15, 18, 19, 20 (upper)
Diagram ref no: 10, 13, 14, 15, 16, 17 (lower)

• Position on Vehicle: 
Rear suspension lower track control arms (left & right) - connecting rear sub-frame to wheel carrier.
Rear suspension upper centre and upper outer track arms - linking sub-frame and wheel carrier at upper level.

• Applications: 
Ideal for vehicles where the rear suspension arms and bushings are worn, exhibiting play, knocking, or uneven tyre wear - or when performing a full rear axle suspension upgrade for maximum performance and durability.

The rear upper and lower control arms are fundamental to wheel location, suspension articulation, alignment retention and handling precision. Worn arms or degraded bushings can cause rear-end instability, excessive play, uneven tyre wear, clunks and compromised ride quality. This full-axle kit ensures matched new components on both sides of the rear axle, restores correct rear suspension geometry, supports tyre life and preserves your vehicle’s dynamic performance.

When and why to replace:
• Observable play or clunking in the rear suspension when accelerating, braking or cornering.
• Uneven or abnormal rear tyre wear, or alignment out of specification.
• During major rear suspension service (bushings, links, shocks, sub-frame work) when access is given.
• High-mileage Panamera where the original rear arms are likely fatigued and near end-of-service life.
• You want matched axle performance and avoid uneven behaviour by replacing only one side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CONTROLARM970.RR

The product you are viewing cross references to these numbers