high-pressure injector Genuine Porsche part 9A1110128AU

Porsche's new DFI (Direct Fuel Injection) intake is a totally and completely redesigned intake system developed to deliver improved performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber.



The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.

This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in performance increases without any loses in power.

The all new specifically designed IPD 3.6L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including the OE factory throttle body.

The improved IPD intake design creates increased air velocity and air speed resulting in impressive power and torque gains for Porsche driving enthusiast.

The superior design of the DFI IPD Plenum provides an additional 14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any power loses down low.

Installation of the new IPD 3.6L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.

Fits:
Porsche 997 GEN2 3.6L

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97482-3.6

The product you are viewing cross references to these numbers

The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.



The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.

Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.

Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.

The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.

Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.

Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.

This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software.

The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.

Fits:
Porsche 997 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97274.2

The product you are viewing cross references to these numbers

IPD Aluminum Intake Plenum.



Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L

After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.

The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.

The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.

Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range

Requires 997 GT3 82mm throttle body

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

81482

The product you are viewing cross references to these numbers