hose clip Genuine Porsche part 99951236402

Designed to give 25% more air flow, which in turn gives more power.

NOTE: For manual cars only

Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.

The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.

The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.

No "Check engine" lights as you retain the factory MAF.

Please note this item fits MANUAL CARS ONLY Replacing Factory black hose 99611022157.

Kit Contains:
1 x Cold Air Hose
2 x Jubilee Clips
1 x Alloy Stopper plug

*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

INDUCTIONKIT20

The product you are viewing cross references to these numbers

Designed to give 25% more air flow, which in turn gives more power.

Installing the cold air performance enhancement kit will make any standard 997 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 997 owner that wants his car to sound slightly more aggressive than stock.

The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.

The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.

No "Check engine" lights as you retain the factory MAF.

Kit Contains:
1 x Cold Air Hose
1 x Jubilee Clip 12mm 91-110
1 x Hose Screw Clamp 9mm 80-100
1 x Alloy Stopper plug

*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

INDUCTIONKIT10

The product you are viewing cross references to these numbers

Exhaust Hardware Package Straight Though System



This set can be used when fitting the straight though system to Porsche 911 2.7L / 3.0L / SC / 3.2L. These parts will help with the air ducting and make a tidy finish instead of cutting holes on the existing tin ware

Fits:
Porsche 911 1974-83 2.7L / 3.0L
Porsche 911 1984-89 3.2L

Kit Includes:
- 2 x Side Tin Ware Left & Right
- 2 x End Tin ware with holes
-10 x Bolts Hex head
-10 x Washers
- 4 x Hose Clamps
- 2 x Heater Hoses

For more information about this product Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT09

The product you are viewing cross references to these numbers

Cayenne 4.5L S & Turbo's suffer from slip plastic water pipes, due to over heating, this new Water Cooling System Upgrade with alloy pipes will replace the older plastic design.

Fits:
Porsche 955 Cayenne 4.5L S 2003-06
Porsche 955 Cayenne 4.5L Turbo

Diagram ref Nos. 7, 9, 10, 11, 12, 13, 16, 17, 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WATERPIPEKIT01

The product you are viewing cross references to these numbers