safety clamp Genuine Porsche part 99916607702

Code: 99916607702

Genuine Porsche part

safety clamp

The product code 99916607702 was also found on these diagrams

604-01 - safety clip

brake fluid reservoir, brake master cylinder 964 CARRERA 2 1989-94

702-00 - safety clip

Hand Lever System, Pedal Cluster 964 (911) (1989-1994)

pedals manual transmission 964 CARRERA, TURBO 1989-94

604-01 - safety clip

brake fluid reservoir and brake master cylinder 993 1994-98

702-00 - safety clip

Hand Lever System, Pedal Cluster 993 (911) (1994-1998)

pedals manual transmission 993 1994-98

702-05 - lock washer

pedals tiptronic transmission (M249) 993 1994-98

105-15 - safety clip b 22

water cooling - 3 - for 996 CARRERA 2/4/4S M96.01/02/03/04 1998-05

105-15 - safety clip b 22

water cooling - 3 - for 996 TURBO 2001-05

105-15 - safety clip b 22

water cooling 3 for 996 GT3-1 M96.76 2000-01 and 996 GT3-1/GT3 RS M96.79 2004-05

105-15 - safety clip b 22

water cooling - 3 - for 986 Boxster 1997-04

702-00 - lock

Hand Lever System, Pedal Cluster Boxster 986/987/981 (1997-2016)

pedals 986 Boxster 1997

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

4 4 4 4

Damper swivel pin. Porsche 911 65-76

90008701102/1

Product Information

Damper swivel pin.
damper swivel pin (or retaining pin) designed for mounting gas struts or dampers on the front bonnet or engine lid of the Porsche 911. secures the ball-joint or swivel bracket of the strut/damper in place, allowing controlled movement while ensuring the strut remains fastened under load. This is exact reproduction.
Sold as each.

Fits:
Porsche 911 1965 - 1976

Diagram ref no 11

This pin is inserted through the mounting bracket of the gas strut or damper and into the mounting point on the lid or hinge assembly. A circlip or cotter pin keeps it in place, allowing the strut to pivot correctly while ensuring secure retention. Without a solid pin, the strut could become loose or detached, compromising lid safety and function.

Over time, the pin can become corroded, bent, worn, or lost due to repeated strut motion, environmental exposure (moisture, road spray), and age. A compromised pin may lead to:
•  The gas strut mounting becoming loose or detached
•  Lid or bonnet not staying open reliably or dropping unexpectedly
•  Increased wear on the strut bracket or hinge due to improper pivoting

Replace when:
• The original pin appears rusted, bent, or its retaining clip is missing
• You’re replacing or servicing the gas strut/damper on the bonnet or engine lid
• You’re restoring the bodywork or hinge/strut assembly and want correct, safe hardware

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90008701102

99916604302

99908700302

90008701102

The product you are viewing cross references to these numbers

3 3 3

Brake Line Clip. Porsche 964 / 993 1989-98

99916607101

Product Information

Brake Line Clip.
Small but essential, this clip keeps the brake lines fixed in place along the chassis or suspension, preventing vibration, chafing, or accidental damage.
Sold Each.

Fits:

Porsche 964 (911) C2 1989-93
Porsche 964 (911) C4 1989-93
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) RS 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97
Porsche 993 (911) TURBO 1994-96

What This Product Does:

Supports and secures the brake line so it doesn’t move, rub against other components, or get damaged.
Helps prevent vibration, chafing, and wear of lines due to movement. When properly clipped, the brake line routing stays clean and safe.
Keeps the brake line fixed in correct position, preserving the correct shape/routing, which is important for safety and longevity.

When / How It Fails — Symptoms:

Brake line is loose, rattling or touching nearby moving parts or sharp surfaces.
Visible movement or sagging of the brake line, especially under load or rough roads.
Wear or damage (nicks, grooves) appear on the brake line where it’s rubbing against something due to a missing or broken clip.
Corrosion or breakage of the clip itself, meaning it no longer holds the line securely.
Unusual brake noises or vibration if line movement interferes with suspension or other components.

Why Replacement Matters:

Prevents damage to the brake line, which is a critical safety component.
A worn/rubbing line can fail, leak or burst.
Ensures the brake line stays in place, preserving correct routing and avoiding interference with moving suspension or body parts.
Helps maintain braking performance, safety, and reliability.

Diagram Ref No 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99916607101

99916607101

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

safety clamp Genuine Porsche part 99916607702