Bolt with washer Genuine Porsche part 99907287201

Complete Rear Upper Control Arm set, includes:
• 2x 97033104700 (upper control arms)
• 4x 97033104300 (upper outer track control arms)
• A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Together, these components offer a complete rear upper suspension refresh. Each control arm is manufactured to match original Porsche equipment in terms of geometry, material, bushings and mounting points - ensuring restored capability for alignment, ride comfort and handling precision.

Fits:
Porsche 970 Panamera 2010 - 2016

Diagram ref no 8, 9, 15, 18, 19, 20.

• Position on Vehicle: Rear suspension, upper level - two centre arms and four outer track arms, connecting the sub-frame to wheel hubs/carrier assemblies.

• Applications: Ideal when the original suspension arms or bushings show wear, excessive play or mis-alignment; or when you are performing a full rear axle suspension overhaul to bring handling back to factory standard.

The rear upper control arms and outer track links play a vital role in locating the wheels, maintaining alignment, and ensuring stable vehicle dynamics. If these components wear or the bushings fatigue, you’ll likely see rear-end instability, uneven tyre wear, clunks under load or degraded handling. Replacing them restores correct rear geometry, improves ride and handling consistency and helps protect other suspension parts.

When and why to replace:
• Rear suspension creaking, knocking or excessive play when cornering or accelerating.
• Rear tyres showing uneven wear or alignment falling out of spec.
• During major rear suspension service (bushings, link arms, subframe removal) - when access allows a full kit change.
• High-mileage Panamera where original suspension arms may have reached the end of their service life.
• For full-axle symmetry: when one side is worn, replacing both sides with matched parts eliminates mismatch in performance and handling.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104X00

The product you are viewing cross references to these numbers

Complete Rear Lower track control arm set, includes:
• 1x 97033104104  (left lower wishbone)
• 1x 97033104204  (right lower wishbone)
• A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Together, these components offer a complete rear lower suspension refresh. Each control arm is manufactured to match original Porsche equipment in terms of geometry, material, bushings and mounting points - ensuring restored capability for alignment, ride comfort and handling precision.

Fits:
Porsche 970 Panamera 2010 - 2016

Diagram ref no 10, 13, 14, 15, 16, 17

• Position on Vehicle: Rear suspension, lower track control arm positions - one each side of the rear axle, connecting wheel carrier to sub-frame and controlling lateral movement under load.

• Applications: Ideal when one or both of the rear lower track arms are worn, bushings are degraded, or when performing a full rear suspension refresh to restore alignment, ride quality and handling balance.

The rear lower track control arms are crucial to maintaining accurate wheel positioning, alignment and rear-end stability under acceleration, braking and cornering. When the arms or bushings are worn, you may experience rear instability, uneven tyre wear, clunks when cornering or general degradation of handling. Replacing them restores full factory geometry, improves ride comfort and reduces wear on related suspension components.

When and why to replace:
• Noticeable play or clunking in the rear suspension under load or when driving over uneven surfaces.
• Uneven rear tyre wear or rear alignment constantly drifting out of spec.
• After replacement of other suspension components (rear bushes, track arms, shock absorbers) where access is granted.
• High-mileage Panamera where original track arms/bushings are likely fatigued.
• If you’re looking for a matched-axle solution to ensure both sides of the rear suspension perform identically, rather than replacing just one side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033104X04

The product you are viewing cross references to these numbers

Complete Rear Lower and Upper Control Arm set, includes:
• 2x 97033104700 (upper control arms)
• 4x 97033104300 (upper outer track control arms)
• 1x 97033104104 (left lower wishbone)
• 1x 97033104204 (right lower wishbone)
• A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Each arm is engineered to replicate the original Porsche equipment, including correct geometry, premium bushings, and exact mounting points. The fitting kit ensures all factory-specified fasteners and alignment shims are included for a seamless install. This unified kit restores both the upper and lower rear axle linkages, giving you full axle symmetry, correct handling behaviour and reinstated ride quality.

Fits:
Porsche 970 Panamera 2010 - 2016

Diagram ref no:  8, 9, 15, 18, 19, 20 (upper)
Diagram ref no: 10, 13, 14, 15, 16, 17 (lower)

• Position on Vehicle: 
Rear suspension lower track control arms (left & right) - connecting rear sub-frame to wheel carrier.
Rear suspension upper centre and upper outer track arms - linking sub-frame and wheel carrier at upper level.

• Applications: 
Ideal for vehicles where the rear suspension arms and bushings are worn, exhibiting play, knocking, or uneven tyre wear - or when performing a full rear axle suspension upgrade for maximum performance and durability.

The rear upper and lower control arms are fundamental to wheel location, suspension articulation, alignment retention and handling precision. Worn arms or degraded bushings can cause rear-end instability, excessive play, uneven tyre wear, clunks and compromised ride quality. This full-axle kit ensures matched new components on both sides of the rear axle, restores correct rear suspension geometry, supports tyre life and preserves your vehicle’s dynamic performance.

When and why to replace:
• Observable play or clunking in the rear suspension when accelerating, braking or cornering.
• Uneven or abnormal rear tyre wear, or alignment out of specification.
• During major rear suspension service (bushings, links, shocks, sub-frame work) when access is given.
• High-mileage Panamera where the original rear arms are likely fatigued and near end-of-service life.
• You want matched axle performance and avoid uneven behaviour by replacing only one side.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CONTROLARM970.RR

The product you are viewing cross references to these numbers