bracket Genuine Porsche part 99711043340

Aluminum Intake Plenum. Porsche 996 Carrera 3.4L / 3.6L IPD



Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)

Fits:
Porsche 997 GEN1 3.6L
Porsche 997 GEN1 3.8L S

The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.

The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.

The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.

The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.

Just like the Carrera S, it's difficult to find power for the naturally aspirated 3.4L Carrera, but the IPD Plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the IPD patented aluminum "Y" style Plenum.

The IPD Plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive Performance improvements like this will truly transform your Porsche driving experience.

These added power gains in the mid range create a more liner power curve helping to minimizing the dip in power typically experienced in the factory curve resulting in considerable performance improvements.

The 996 Plenum installation is a direct bolt on R & R (remove and reinstall) procedure. Installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97174

The product you are viewing cross references to these numbers

Aluminum Intake Plenum Competition 82MM



Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)

Porsche 997 3.8L S
Porsche 997 3.6L

Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.

All of the IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsche's 82mm 997 GT3 throttle body. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque.

IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile.

Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.

Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97182

The product you are viewing cross references to these numbers

Throttle body support bracket.


Fits:
Porsche 997 MKI 3.8L 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99711042302

The product you are viewing cross references to these numbers

Vacuum Unit For Air Intake System. 
Sold Each.

Fits:
Porsche 970 Panamera GTS 4.8L V8 MKI 2009>>2013
Porsche 970 Panamera GTS 4.8L V8 MKII 2014>>2016
Porsche 981 Boxster S 3.4L 2012>>2016
Porsche 981 Cayman S 3.4L 2014>>2016
Porsche 981 Cayman GT4 3.8L 2016
Porsche 981 Boxster Spyder 3.8L 2016
Porsche 986 Boxster 2.7L 1999>>2004
Porsche 986 Boxster S 3.2L 1999>>2004
Porsche 987 Boxster 2.7L MKI 2005>>2008
Porsche 987 Boxster S 3.2L / 3.4L MKI 2005>>2008
Porsche 987 Boxster 2.9L MKII 2009>>2012
Porsche 987 Boxster S 3.4L MKII 2009>>2012
Porsche 987 Cayman 2.7L MKI 2006>>2008
Porsche 987 Cayman S 3.4L MKI 2006>>2008
Porsche 987 Cayman 2.9L MKII 2009>>2012
Porsche 987 Cayman S / R 3.4L MKII 2009>>2012
Porsche 991.1 Carrera 2S / 4S 3.8L MKI 2012>>2016
Porsche 991.1 R / GT3 RS 4.0L 2014>>2016
Porsche 993 Carrera 2 / 4 1994>>1997
Porsche 993 Carrera 2S / 4S 1994>>1997
Porsche 993 Carrera RS 1994>>1997
Porsche 996 Carrera 2 / 4 / C4S 1997>>2005
Porsche 996 GT3 1999>>2005
Porsche 997 Carrera 2 / 2S MKI 2005>>2008
Porsche 997 Carrera 4 / 4S MKI 2005>>2008
Porsche 997 Carrera 2 / 2S MKII 2009>>2012
Porsche 997 Carrera 4 / 4S MKII 2009>>2012
Porsche 997 GT3 2007>>2012
Porsche 982 Boxster Spyder RS 2019>>
Porsche 982 Cayman GT4 2019>>
Porsche 992 GT3 / RS / ST 4.0L 2021>>

Diagram Ref No 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB129061

The product you are viewing cross references to these numbers