Exhaust pipe Genuine Porsche part 982254350L

Akrapovic Link pipe set (Titanium) for

 
cars with the hanging brackets

Porsche 718 Cayman GT4 / Spyder 02/2020>>
Porsche 718 Cayman GT4 / Spyder - OPF/GPF 02/2020>>
Porsche 718 Cayman GTS 4.0 / Boxster GTS 4.0 02/2020>>
Porsche 718 Cayman GTS 4.0 / Boxster GTS 4.0 - OPF/GPF 02/2020>>



Link pipe set (SS) was tested and developed together with Slip-On Race Line (Titanium) system.

Constructed from high-grade lightweight titanium, with flanges cast in the in-house foundry that perfectly fit the Slip-On Race Line (Titanium) exhaust system, these pipes have been developed to create a full Akrapovič system offering increased performance and a thrilling soundtrack. With the amalgamation of these two state-of-the-art products, the sound has a true racing character with a high-frequency sporty and enjoyable tone, fully in keeping with the performance of the vehicle.

The combination of a Slip-On Race Line (Titanium) and the Link pipe set (Titanium) have been tested on the Akrapovič dyno, using a Porsche 718 Cayman GT4 with a stock exhaust system for comparison, and the Akrapovič configuration delivers a power gain of +11.6 kW at 2,600 rpm allied to a torque increase of +43.0 Nm at 2,600 rpm. The full arrangement of the exhaust and link pipes is intended for racing track use only and is not intended for street use.

For OPF: When installing the Link pipe set (Titanium), remapping the ECU is mandatory.

Fitment notice: A modification of fitting brackets done by Porsche on 718 GT4/Spyder and 718 Cayman GTS 4.0/Boxster GTS 4.0 produced approximately after February 2020 was identified. Please turn to your Area sales manager for detailed explanation on differences in order to choose the appropriate exhaust for your car.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

L-PO

The product you are viewing cross references to these numbers

Akrapovic Link pipe set (Titanium) for

cars with first edition brackets

Porsche 718 Cayman GT4 / Spyder >>02/2020
Porsche 718 Cayman GT4 / Spyder - OPF/GPF >>02/2020
Porsche 718 Cayman GTS 4.0 / Boxster GTS 4.0 >>02/2020
Porsche 718 Cayman GTS 4.0 / Boxster GTS 4.0 - OPF/GPF >>02/2020



Link pipe set (SS) was tested and developed together with Slip-On Race Line (Titanium) system.

Constructed from high-grade lightweight titanium, with flanges cast in the in-house foundry that perfectly fit the Slip-On Race Line (Titanium) exhaust system, these pipes have been developed to create a full Akrapovič system offering increased performance and a thrilling soundtrack. With the amalgamation of these two state-of-the-art products, the sound has a true racing character with a high-frequency sporty and enjoyable tone, fully in keeping with the performance of the vehicle.

The combination of a Slip-On Race Line (Titanium) and the Link pipe set (Titanium) have been tested on the Akrapovič dyno, using a Porsche 718 Cayman GT4 with a stock exhaust system for comparison, and the Akrapovič configuration delivers a power gain of +11.6 kW at 2,600 rpm allied to a torque increase of +43.0 Nm at 2,600 rpm. The full arrangement of the exhaust and link pipes is intended for racing track use only and is not intended for street use.

For OPF: When installing the Link pipe set (Titanium), remapping the ECU is mandatory.

Fitment notice: A modification of fitting brackets done by Porsche on 718 GT4/Spyder and 718 Cayman GTS 4.0/Boxster GTS 4.0 produced approximately after February 2020 was identified. Please turn to your Area sales manager for detailed explanation on differences in order to choose the appropriate exhaust for your car.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

L-PO

The product you are viewing cross references to these numbers

Over axle GPF delete pipes.

Ditch the factory gas particulate filters to increase power, save weight and add a throatier more aggressive tone. Our design process started with 3D scanning the entire exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After multiple revisions for sound and dyno testing we settled on using a one piece mandrel bent over axle pipe that goes straight into the free flowing part of the OEM PSE exhaust and a secondary pipe TIG welded to the main section to make a Y configuration to utilize the quiet side of the PSE exhaust when the valves are closed.

SOUND: 
These Over Axle GPF Delete Pipes will bring out a stronger throatier tone from your 4.0l flat six. This is a mild but noticeable increase in overall volume over stock.

FEATURES:
•  Fits all 718 Cayman/Boxster GT4 / GTS / Spyder Cars 2020+
•    Over Axle pipes remove and delete the Gasoline Particulate Filters, GPF, found on all 4.0L cars worldwide
•    Save 9 lbs / 3.5 KG versus the stock GPF over axle pipes (T304 Stainless Steel)
•    Now available in T304 Stainless Steel, Titanium, Heat Wrapped Stainless Steel, or with an added resonator
•    Titanium Saves 16 lbs / 7.3 KGs comapred to stock
•    More sports car sound and more exhaust flow
•    Designed, engineered and built 100% in house at Fabspeed using state of the art equipment and technology
•    Simple DIY bolt-on installation, no cutting or welding required
•    All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

DISCLAIMER FOR EUROPEAN CUSTOMERS: This product removes the OEM Gas Particulate Filters from the vehicle, and as such, is strictly intended for closed track events and off-road use only, never to be driven on public roads. This product is or contains a Racing GPF Bypass Pipe, which will give you check engine lights on European OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing GPF Bypass Pipes are solely intended for track and race cars. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR718GT4

The product you are viewing cross references to these numbers

Fabspeed Street Performance Package 718 GT4 / GTS / Spyder 2020+

For late model exhaust brackets



Fabspeed's 718 Street Performance Package is the premium solution for adding dynamic performance and superlative sound to your GT4 / GTS / Spyder on the street. Delivering well over 400 horsepower to the wheels with easy-to-install bolt-on upgrades (on a GT4), there is no better option for the GT4 owner seeking maximum power and performance while retaining catalysts and the stock ECU tune. No need to suffer long periods of downtime for an engine build. Simply install the Fabspeed 718 Street Performance Package and get all the power you need. Fully street and racetrack tested on PDK and Manual cars!

SOUND:

With PSE (Porsche Sport Exhaust) on and the valves open, this system turns the 4.0L's exhaust note into a truly exotic sound with a significant increase in volume. This system will turn heads as you rip by, some jeers from the nearby pedestrians may have you hitting the accelerator a little more often. Tolerable enough for street driving and highway cruising but definitely not a subtle sunday-mass regular.

POWER:

After many dyno hours and incremental refinements to our design we were able to achieve dyno gains of 27 WHP and 19 FT/LBS of TQ at 7500 RPM. Best of all, power gains are seen as low as 3700 RPM, so there are power gains across the entire power band!

INCLUDES:

• Fabspeed Valvetronic X-Pipe Exhaust
• Fabspeed RENNKRAFT™ Modular Street and • Racing Headers with HJS Catalytic Converters
• Fabspeed Over Axle GPF Delete Pipes
• BMC F1 Replacement Air Filters

FEATURES:

• Fits all Porsche 718 Cayman/Boxster GT4/GTS/Spyder Cars (2020+) (Please see note below for how to identify if your car has early or late model exhaust brackets)
• Significant Dyno gains across the RPM band 27 WHP and 19 FT/LBS of TQ
• Weight savings of -20 lbs / -9 KG's
• Constructed from CNC mandrel-bent T304L stainless steel
• We only use high quality, metallic core, 200 cell HJS catalytic converters
• The Valvetronic system uses Helical Valves imported from the U.K. which are the highest quality valves on the market
• Side effects may include extreme euphoria and uncontrollable laughter. Some users have expressed acceleration-induced excitement.
• Fabspeed is not responsible for miles per gallon lost, however; smiles per gallon gained is entirely our fault
• Optimized for maximum performance with no check engine light, guaranteed (USA Models Only, EU models please inquire)
• Choose between real Carbon Fiber, Satin Black, Polished Stainless, Brushed Stainless, or Re-use your OEM tips
• Simple bolt-on installation, no cutting or welding required
• Fabspeed has over 25+ years of Porsche air and water cooled excellence
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Note: On the 718 GT4 and Spyder, Porsche used early model exhaust brackets up until roughly the February 2020 build date. After the February 2020 build date Porsche switched to the late model exhaust brackets. Before purchasing you MUST check to see if your 718 GT4/Spyder has the early or late style exhaust brackets. Please see the example photos below

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR718GT4SPKG

The product you are viewing cross references to these numbers

Fabspeed Street Performance Package 718 GT4 / GTS / Spyder 2020+

For early model exhaust brackets



Fabspeed's 718 Street Performance Package is the premium solution for adding dynamic performance and superlative sound to your GT4 / GTS / Spyder on the street. Delivering well over 400 horsepower to the wheels with easy-to-install bolt-on upgrades (on a GT4), there is no better option for the GT4 owner seeking maximum power and performance while retaining catalysts and the stock ECU tune. No need to suffer long periods of downtime for an engine build. Simply install the Fabspeed 718 Street Performance Package and get all the power you need. Fully street and racetrack tested on PDK and Manual cars!

SOUND:

With PSE (Porsche Sport Exhaust) on and the valves open, this system turns the 4.0L's exhaust note into a truly exotic sound with a significant increase in volume. This system will turn heads as you rip by, some jeers from the nearby pedestrians may have you hitting the accelerator a little more often. Tolerable enough for street driving and highway cruising but definitely not a subtle sunday-mass regular.

POWER:

After many dyno hours and incremental refinements to our design we were able to achieve dyno gains of 27 WHP and 19 FT/LBS of TQ at 7500 RPM. Best of all, power gains are seen as low as 3700 RPM, so there are power gains across the entire power band!

INCLUDES:

• Fabspeed Valvetronic X-Pipe Exhaust
• Fabspeed RENNKRAFT™ Modular Street and • Racing Headers with HJS Catalytic Converters
• Fabspeed Over Axle GPF Delete Pipes
• BMC F1 Replacement Air Filters

FEATURES:

• Fits all Porsche 718 Cayman/Boxster GT4/GTS/Spyder Cars (2020+) (Please see note below for how to identify if your car has early or late model exhaust brackets)
• Significant Dyno gains across the RPM band 27 WHP and 19 FT/LBS of TQ
• Weight savings of -20 lbs / -9 KG's
• Constructed from CNC mandrel-bent T304L stainless steel
• We only use high quality, metallic core, 200 cell HJS catalytic converters
• The Valvetronic system uses Helical Valves imported from the U.K. which are the highest quality valves on the market
• Side effects may include extreme euphoria and uncontrollable laughter. Some users have expressed acceleration-induced excitement.
• Fabspeed is not responsible for miles per gallon lost, however; smiles per gallon gained is entirely our fault
• Optimized for maximum performance with no check engine light, guaranteed (USA Models Only, EU models please inquire)
• Choose between real Carbon Fiber, Satin Black, Polished Stainless, Brushed Stainless, or Re-use your OEM tips
• Simple bolt-on installation, no cutting or welding required
• Fabspeed has over 25+ years of Porsche air and water cooled excellence
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Note: On the 718 GT4 and Spyder, Porsche used early model exhaust brackets up until roughly the February 2020 build date. After the February 2020 build date Porsche switched to the late model exhaust brackets. Before purchasing you MUST check to see if your 718 GT4/Spyder has the early or late style exhaust brackets. Please see the example photos below

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR718GT4SPKG

The product you are viewing cross references to these numbers

Milltek GPF Bypass Sports Exhaust With Titanium GT-115 Tailpipe Trims.

Post Feb 2020 Build ONLY!

Fits:
Porsche 718 Cayman GT4 4.0L 2020>>
Porsche 718 Boxster GTS 4.0L 2020>>

Exhaust System With GPF (Gasoline Particulate Filter) Delete
Pipe Diameter: 2.37" (60.30mm)
Tailpipe: 115mm GT115

Parts Assembly:
MSPO258: LH GPF Bypass
MSPO259: RH GPF Bypass
MSPO269: LH Valve Assembly
MSPO270: LH Valve Assembly
MSPO262: Rear Silencer Assembly
MSPO271: LH Mounting Bracket
MSPO272: RH Mounting Bracket
MSPO263: x2 Outlet Pipes
MSTIP252: x2 4.5" Brushed Titanium Tips

For Track Use ONLY!
Requires Stage 2 ECU Software Update

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO164

The product you are viewing cross references to these numbers

Milltek GPF Bypass Sports Exhaust With Burnt Titanium GT-115 Tailpipe Trims.

Post Feb 2020 Build ONLY!

Fits:
Porsche 718 Cayman GT4 4.0L 2020>>
Porsche 718 Boxster GTS 4.0L 2020>>

Exhaust System With GPF (Gasoline Particulate Filter) Delete
Pipe Diameter: 2.37" (60.30mm)
Tailpipe: 115mm GT115

Parts Assembly:
MSPO258: LH GPF Bypass
MSPO259: RH GPF Bypass
MSPO269: LH Valve Assembly
MSPO270: LH Valve Assembly
MSPO262: Rear Silencer Assembly
MSPO271: LH Mounting Bracket
MSPO272: RH Mounting Bracket
MSPO263: x2 Outlet Pipes
MSTIP253: x2 4.5" Burnt Titanium Tips

For Track Use ONLY!
Requires Stage 2 ECU Software Update

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO165

The product you are viewing cross references to these numbers

Milltek GPF Bypass Sports Exhaust With Jet Carbon GT-115 Tailpipe Trims.

Post Feb 2020 Build ONLY!

Fits:
Porsche 718 Cayman GT4 4.0L 2020>>
Porsche 718 Boxster GTS 4.0L 2020>>

Exhaust System With GPF (Gasoline Particulate Filter) Delete
Pipe Diameter: 2.37" (60.30mm)
Tailpipe: 115mm JET-115

Parts Assembly:
MSPO258: LH GPF Bypass
MSPO259: RH GPF Bypass
MSPO269: LH Valve Assembly
MSPO270: LH Valve Assembly
MSPO262: Rear Silencer Assembly
MSPO271: LH Mounting Bracket
MSPO272: RH Mounting Bracket
MSPO263:  x2 Outlet Pipes
MSTIP244: x2 Jet-115 Carbon Trims

For Track Use ONLY!

Requires Stage 2 ECU Software

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO166

The product you are viewing cross references to these numbers

Milltek GPF Bypass Sports Exhaust With Cerakote Black GT-115 Tailpipe Trims.

Post Feb 2020 Build ONLY!

Fits:
Porsche 718 Cayman GT4 4.0L 2020>>
Porsche 718 Boxster GTS 4.0L 2020>>

Exhaust System With GPF (Gasoline Particulate Filter) Delete
Pipe Diameter: 2.37" (60.30mm)
Tailpipe: 115mm GT115

Parts Assembly:
MSPO258: LH GPF Bypass
MSPO259: RH GPF Bypass
MSPO269: LH Valve Assembly
MSPO270: LH Valve Assembly
MSPO262: Rear Silencer Assembly
MSPO271: LH Mounting Bracket
MSPO272: RH Mounting Bracket
MSPO263: x2 Outlet Pipes
MSTIP251: x2 4.5" Cerakote Black Tips

For Track Use ONLY!

Requires Stage 2 ECU Software

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SSXPO163

The product you are viewing cross references to these numbers