bracket for brake hose Genuine Porsche part 96433107200

Powerflex Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram.
Fits to No 1 on the diagram.


The original bush is no longer available from Porsche except if brought with the rear arm which costs in excess of £1000.00. With the cars been over 15 years old if these bushes have not been replaced they could be causing all sorts of geometry problems, leading to excessive tyre wear, handling problems, knocking etc.

Powerflex developed the replacement bush with similar torsional characteristics to the RS version, which is up-rated over the rest of the models in the range. Included in the low compliance design are 2 OilLite bearings allowing the arm to pivot around the central sleeve with minimal drag.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-106

The product you are viewing cross references to these numbers

Rear suspension spring plate. Porsche 964
Rear Axle Strut.  Price is Each

Fits: Left or Right side

Fits:
Porsche 964 Carrera / Turbo 1989-94 (Not Carrera RS)

Click "Zoom in" for large parts diagram.
Diagram ref no. 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433106010

The product you are viewing cross references to these numbers

Powerflex Black Series Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram
Fits to No 1 on the diagram.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-106BLK

The product you are viewing cross references to these numbers

Rear Spring Plates, SET OF 2.




Porsche 964
Porsche 993

This kit replaces the factory spring plates and compliant rubber bushings with a precision rod end that allows for friction free movement and easy adjustment of toe angles without affecting camber.

Please note original Porsche spring plates OE Numbers 96433106008 / 96433106010 are no longer available, so these are a great alternative.

The precision rod end also improves driver feedback and maintains alignment settings for better handling.
The plates are fabricated from alloy steel and nickel plated for strength and corrosion resistance.

Allows for camber settings up to -4.5 deg. Mount with slot on top for camber angle more than -1.5 deg.

Motorsport Product.

Price is SET OF 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964RSPLT

The product you are viewing cross references to these numbers

Now over 20 years old, 964 Spring plate bushings are beginning to fail.



Price is SET OF 2 (Complete for one car)

Fits:
Porsche 964
Porsche 965

Our bushing replacement kit allows you to restore your original spring plates, without the high cost of complete replacement plates. Our product is modeled after the factory original bushings and similarly includes a spherical bearing encased in an outer elastomeric layer. The elastomeric layer provides noise and vibration isolation, similar to the OEM components.

Our bushing replacement kit includes fully sealed monoball cartridges featuring maintenance free PTFE linings that require no lubrication. The cartridges are encased in an elastomeric layer that is slightly firmer than stock to improve performance, reducing deflection under load while maintaining the noise isolation characteristics of the original rubber. Weather seals keep dirt out and extend product life.



Motorsport Product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2260004

The product you are viewing cross references to these numbers

HD Complete trailing arm bushing kit. Including installation tools 
Fast road and track 85 Shore rating 

Fits:
Porsche 964

Restore and maintain proper rear suspension geometry by returning your trailing arm play to factory standards with this kit which includes:
- Rubber bushings for two (2) 964 rear trailing arms
- Brand new aluminum bushing center sections
- Bushing press tool
- Lubricant for a quiet and easy finished installation

Our new High Density line now offers an alternative to purchasing expensive new rear trailing arms for your 964. This rear kit includes everything you need to remove and replace your original rubber bushings while providing a 25% increase in stiffness.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433102100

The product you are viewing cross references to these numbers

Rear Trailing Arm bushing for Porsche 964



Finally a way to replace the rubber trailing arm bushings without buying new trailing arms. This is a complete kit that includes rubber bushings, metal cores, pressing tools, and lubricant. Everything you need to replace bushings on a pair of 964 trailing arms.

Price is SET OF 2 (Complete for one car)

Fits:
Porsche 964

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2290019

The product you are viewing cross references to these numbers

Replacement spring plates with friction free precision rod ends. Easy adjustment of toe angles without affecting camber.



(Please note original Porsche spring plates OE Numbers 96433106008 / 96433106010 are no longer available, so these are a great alternative)

The precision rod end also improves driver feedback and maintains alignment settings for better handling.
The plates are fabricated from alloy steel and nickel plated for strength and corrosion resistance.

Allows for camber settings up to -4.5 deg. Mount with slot on top for camber angle more than -1.5 deg.

Price is SET OF 2

Fits:
Porsche 964 C2 , C4
Porsche 964 RS , Turbo 

Motorsport Product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602609641

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram.
Fits to No 1 on the diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-106H

The product you are viewing cross references to these numbers