Vacuum hose 3,5x2, This part number supersedes to 00004320499 Genuine Porsche part 96411095300

Fits:
Porsche 964 Carrera 1991-94 (except Turbo)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Click 'Zoom in' for large parts diagram.
Diagram ref no 37

Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Product Overview:
Transform your Porsche 964's performance with this sleek and high-tech intake kit designed for Porsche 964/993. This innovation marks a transition from the typical accelerator cable-based throttle to an electronic "drive by wire" throttle body. This advanced change streamlines the intake system by eliminating unnecessary components, resulting in a cleaner engine bay appearance. 

This modification offers a more drivable setup for highly tuned engines while incorporating the precision of a drive by wire (DBW) throttle.

This enhanced drivability is a key feature for a tuned aircooled engine and allows for smooth idle control with a cold as well as a hot engine. It simply makes the engine feel more modern as compared to the old ITB (individual throttle bodies) setups lacking in mid range torque and difficulties with the idle control.

Precision-Engineered Components:

• 82mm Throttle Body with Reinforced Industrial PA12 Manifold
• CNC-Milled Intake Manifold Stacks Crafted from Billet Aluminium
• Included Rubber Boots and Clamps for Easy Installation
• Islandworks Resonance Tube with Valve and Solenoid, Manufactured from the Same PA12 Material
• Integrated Manifold Pressure and Temperature Sensors
• Essential Vacuum Lines for Optimal Performance

Kit Includes
Complete intake with all the parts seen in the image manufactured from modified PA12 using an industrial process. This intake plenum has been optimized to fit on a Porsche 964 or Porsche 993 and includes all vacuum ports for both brake vacuum and to maneuver the resonance flap.

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert your existing Porsche 964 intake into this version. 

The intake also exists in two versions - this version is what we at Islandworks use with all other intakes, being a modified PA12 material from an industrial manufacturing process. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!
For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert your existing Porsche 964 intake into this version. 

The intake also exists in two versions - This is the premium version where the throttle body runner is milled out of a billet in aluminum. This is the pinnacle of craftmanship giving a very solid feel to the intake at a natural premium. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!

For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Product Overview:

Inlet conversion kit consists of the throttle body runner and the resonance tube. This is what you need to convert a Porsche 996 GT3 MK1 or MK2 plenum to fit on a Porsche 964 engine. This kit is solid and made from a modified PA12 material making the original Porsche parts feel old and flimsy in comparison. 

Components Include: 

• Throttle body runner made out of a modified PA12 material and an industrial 3d moulding process
• Seal and original Porsche 997 GT3 Bosch 82mm electronic throttle body
• Vacuum tube with original resonance flap internals. Note the internals come from refurbished original 996 parts.
• Vacuum solenoid and reservoir with mounts as per images
• Rubber boots and clamps
• Vacuum connections, check valve and extra hose
• Original Bosch MAP-T-sensor for 1 bar