do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Original Porsche Part Genuine Porsche part 95533113500
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Designed for use with 2.5” to 3” lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018
When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
Our 1” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. Used in conjunction with our 2.5” lift kit, a 1” Subframe Drop will result in nearly 0 degrees of axle angle.
Please Note:
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.
A 1” Subframe Drop will decrease overall lift height by 0.5”. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.
Kit Includes:
1” Front Subframe Spacers w/ hardware x 4
1” Rear Subframe Spacers w/ hardware x 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF1
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Designed for use with 2.5” steel spring or 2” air suspension lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
Our 1/2 inch Subframe Drop Kit is designed to use with our 2.5" steel spring or 2" air suspension lift kit. This is not a mandatory upgrade, however if you plan on doing heavy off-roading or driving in the lifted modes on air suspension vehicles we recommend it
When lifting your vehicle, the angle & length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
2.5" inches of lift is the maximum lift that Gen 1&2 Cayenne, Touareg, and Q7s can achieve without stressing the OEM CV joints. On some vehicles, especially those with more worn components, 2.5” of lift is enough to cause CV joints to click.
Our ½” Subframe Drop Kit is designed to eliminate CV joint clicking and improve axle geometry, to roughly 5 degrees, for vehicles with a 2.5” lift.
Kit Includes:
½ inch Subframe Spacers with hardware x 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF5
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Designed for use with 3.5” and more lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
When lifting your vehicle the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
Our 1.5” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues.
This level of Subframe Drop Kit is designed primarily for use in conjunction with our Eurowise, Eurowise+Bilstein, or Eurowise+JRZ coilovers.
Please Note:
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.
A 1.5” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.
Kit Includes:
1.5” Front Subframe Spacers with hardware x 4
1.5” Rear Subframe Spacers with hardware x 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF15
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Designed for use with 4” lift kits or more
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
The 2" Subframe Drop Kit is the largest we offer and is designed for use with lift kits of 4” or more.
When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
Our 2” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues, and includes a steering shaft extension. This level of Subframe Drop Kit will bring the axle angle to nearly 5 degrees on 4” lifts.
Please Note:
Eurowise Gas Tank Skid and Transfer Case Skids will not fit with a 2” subframe drop. If you currently have gas tank skids, you can cut the tabs off of each side and weld them on to the opposite sides to make them work.
Exhaust modifications are required. Dropping the rear subframe 2” will cause it to contact your exhaust.
A 2” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.
Kit Includes:
2” Front Subframe Spacers with hardware x 4
2” Rear Subframe Spacers with hardware x 4
Steel Steering Shaft Extension with hardware x 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF2
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Kit for front and rear subframes
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018
Subframe centering sleeves for the 955/957/958 Cayenne
These sleeves are designed to prevent your subframe from shifting and throwing off alignment while off-roading. When the Volkswagen Audi Group designed the Gen1 chassis, they made the subframe mounting holes larger than the bolt diameter. This is to allow for shifting of the subframe, to adjust caster and camber, but hard driving can introduce unwanted shifts.
Eurowise centering sleeves keep your subframe static by taking up the negative space around the bolt.
Please Note:
A subframe drop is not a replacement for centering sleeves. They are solutions to separate problems.
Subframe centering sleeves can be used in conjunction with Subframe Drop Kits.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORG1001S
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Each unit is sold individually; four units are required per vehicle.
Fits:
Porsche 955 Cayenne 2003-06
Porsche 957 Cayenne 2007-10
Porsche 958 Cayenne 2011-18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533113501
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Designed for use with 2.5” to 3” lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018
Eurowise ½” Subframe Drop Kit
Lifting your Cayenne, Touareg, or Q7 changes the distance and angle between the transmission and wheel hubs, which can lead to axle binding, clicking, and an overall rougher driving experience. The Eurowise ½” Subframe Drop Kit helps correct these issues by lowering the subframe to improve alignment.
The kit includes 8 anodized billet spacers and extended hardware, allowing you to lower both the front and rear subframes. While not required for every build, we recommend a ½" drop when running approximately 2 inches of lift for optimal drivability.
Installing a subframe drop will slightly decrease overall lift.
Kit Includes:
(4) 1” Front Subframe Spacers w/ Hardware
(4) 1” Rear Subframe Spacers w/ Hardware
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSFD05
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
REAR Subframe Mount and Bolt Kit - Restore REAR Chassis Stability and Suspension Integrity
This complete rear subframe mount and bolt kit is designed
for Porsche 955, 957 and 958 Cayenne models.
The kit includes:
4 x Rear subframe mounts
4 x Subframe mounting bolts
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Engineered for precise fitment and durability, this kit provides a comprehensive solution for worn or degraded rear subframe mounting components.
What Rear Subframe Mounts Do
The rear subframe is a structural component that supports the rear suspension, differential and drivetrain assemblies. It is mounted to the vehicle chassis via rubber or bonded mounts that absorb vibration and maintain alignment.
Rear subframe mounts serve to:
- Secure the rear axle assembly to the chassis
- Isolate road vibration and drivetrain movement
- Maintain correct suspension geometry
- Support stable handling and braking
- Reduce cabin noise and harshness
The mounting bolts clamp the subframe securely in place and are critical to maintaining correct torque and structural integrity.
Why Rear Subframe Mounts Fail
Over time, rear subframe mounts are exposed to:
- Constant load from vehicle weight
- Suspension movement and dynamic cornering forces
- Drivetrain torque transfer
- Heat cycles and road contamination
- Age-related rubber degradation
On heavier performance SUVs such as the Porsche Cayenne, subframe mounts can deteriorate due to vehicle mass and high torque output, especially on Cayenne S and Turbo models.
Common signs of failing rear subframe mounts include:
- Clunking or knocking from the rear
- Rear-end instability during acceleration or braking
- Excessive drivetrain movement
- Uneven tyre wear
- Vibration felt through the cabin
- Rear suspension alignment issues
Mounting bolts can also stretch or corrode over time, particularly if removed and reused. For safety-critical components, replacing bolts during service is strongly recommended.
Why You May Need a Complete Rear Subframe Mount Kit
Replacing all four rear subframe mounts at the same time ensures balanced support across the entire rear axle assembly. Installing new mounting bolts guarantees correct clamping force and secure installation.
This kit is ideal for:
- High mileage Porsche Cayenne models
- Vehicles with rear suspension knocking noises
- Rear subframe removal during suspension or differential work
- Chassis restoration projects
- Preventative maintenance on older 955 / 957 / 958 models
A complete rear subframe mount replacement restores chassis stability, improves handling precision and enhances overall driving comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533113501KIT
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed