Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
1 set of securing parts Genuine Porsche part 94435295201
Code: 94435295201
Genuine Porsche part
1 set of securing parts
The product code 94435295201 was also found on these diagrams
Additional information:
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Price: £93.02 inc. VAT
Orderable - 14 - 28 Days
Related products
92835295102
Product Information
Porsche 928 / 928 S / 928 S2 1978-85
Porsche 924 FRONT
Porsche 924S / 924 Turbo REAR
Porsche 944 / 944S Upto 1989 REAR
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92835295102
The product you are viewing cross references to these numbers
Product Information
Brake pads fit verious car models.Porsche 928 / 928 S / 928 S2 1978-85
Porsche 924 FRONT
Porsche 924S / 924 Turbo REAR
Porsche 944 / 944S Upto 1989 REAR
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92835295102
92835295102
20482
571354J
94435295102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
£78.42 inc. VAT
Now £70.58 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
DP3220C
Product Information
Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3220C
The product you are viewing cross references to these numbers
Product Information
EBC RED Brake Pads 'ROAD'Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3220C
92835295102
94435295102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
£82.48 inc. VAT
Now £74.23 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
DP4220R
Product Information
Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4220R
The product you are viewing cross references to these numbers
Product Information
EBC YELLOW Brake Pads 'FAST ROAD'.Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4220R
92835295102
94435295102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Price: £87.29 inc. VAT
Orderable - 3 to 5 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
94435295201
Product Information
Genuine Porsche OE replacement set of precision-engineered components used to install and secure the rear brake pads in the caliper assembly on classic Porsche 924 and 944 models.
One brake pad pin kit is for both rear calipers
Fits:
Porsche 924 1977 - 1988
Porsche 944 1982 - 1991
Diagram ref no 5.
This is an original Porsche brake pad mounting hardware kit carrying the factory part number 944.352.952.01. It includes the complete set of retaining pins, spring clips, shims, and related hardware required for proper installation of rear disc brake pads.
The hardware kit ensures that rear brake pads are securely positioned and held with proper tension within the caliper. Correct hardware prevents pad movement or rattling and allows the pads to slide as designed during braking. By maintaining precise alignment and retention, it helps deliver consistent brake response and even pad wear.
Brake pad hardware is often overlooked but is essential for dependable braking performance. Worn, corroded, bent, or missing hardware can cause:
• Uneven pad wear
• Brake noise (squeal, rattle)
• Inconsistent braking feel
• Increased pad or rotor wear
Replacing the rear brake pad mounting hardware with a Genuine Porsche kit restores the original retention and guidance characteristics, ensuring the braking system functions smoothly, quietly, and safely under all driving conditions.
When to replace
Replace this brake hardware kit when:
• Brake pads are being changed
• Old hardware shows corrosion, wear, or deformation
• You hear noise from the rear brakes
• Pad movement or binding is observed
• You are restoring or servicing the rear brake system
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94435295201
The product you are viewing cross references to these numbers
Product Information
Brake pad pin kit, Rear.Genuine Porsche OE replacement set of precision-engineered components used to install and secure the rear brake pads in the caliper assembly on classic Porsche 924 and 944 models.
One brake pad pin kit is for both rear calipers
Fits:
Porsche 924 1977 - 1988
Porsche 944 1982 - 1991
Diagram ref no 5.
This is an original Porsche brake pad mounting hardware kit carrying the factory part number 944.352.952.01. It includes the complete set of retaining pins, spring clips, shims, and related hardware required for proper installation of rear disc brake pads.
The hardware kit ensures that rear brake pads are securely positioned and held with proper tension within the caliper. Correct hardware prevents pad movement or rattling and allows the pads to slide as designed during braking. By maintaining precise alignment and retention, it helps deliver consistent brake response and even pad wear.
Brake pad hardware is often overlooked but is essential for dependable braking performance. Worn, corroded, bent, or missing hardware can cause:
• Uneven pad wear
• Brake noise (squeal, rattle)
• Inconsistent braking feel
• Increased pad or rotor wear
Replacing the rear brake pad mounting hardware with a Genuine Porsche kit restores the original retention and guidance characteristics, ensuring the braking system functions smoothly, quietly, and safely under all driving conditions.
When to replace
Replace this brake hardware kit when:
• Brake pads are being changed
• Old hardware shows corrosion, wear, or deformation
• You hear noise from the rear brakes
• Pad movement or binding is observed
• You are restoring or servicing the rear brake system
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94435295201
94435295200
94435295201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
£93.02 inc. VAT
Now £83.72 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
DP2346
Product Information
Sold as set of 4 pads for one axle.
Fits:
Porsche 924 2.0L Turbo 1979-88 (Rear)
Porsche 924 S 2.5L 1979-88 (Rear)
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC V4 Greenstuff:
- Fast/Heavy Street Use
- Brake well from cold
- Effective to above 650°C
- Low dust formula
- Generally recommended for cars producing up to 200BHP and / or NOT 4WD
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP2346
The product you are viewing cross references to these numbers
Product Information
EBC GREEN Brake Pads.Sold as set of 4 pads for one axle.
Fits:
Porsche 924 2.0L Turbo 1979-88 (Rear)
Porsche 924 S 2.5L 1979-88 (Rear)
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC V4 Greenstuff:
- Fast/Heavy Street Use
- Brake well from cold
- Effective to above 650°C
- Low dust formula
- Generally recommended for cars producing up to 200BHP and / or NOT 4WD
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP2346
94435295102
92835295102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
£64.66 inc. VAT
Now £58.19 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
94435295102BRE
Product Information
Porsche 924 2.0L 1976-1985 FRONT
Porsche 924 S 2.5L 09/1985-07/1988 REAR
Porsche 928 4.5L 09/1977-08/1982 REAR
Porsche 928 S / S2 4.7L 09/1978-12/1985 REAR
Porsche 944 2.7L 11/1988-08/1989 REAR
Porsche 944 2.5L 06/1981-12/1990 REAR
Porsche 944 S 2.5L 08/1986-07/1988 REAR
Brake System: Teves
Thickness: 18.5 [mm]
Wear Warning Contact: Prepared for wear indicator
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94435295102BRE
The product you are viewing cross references to these numbers
Product Information
Brake pad Set, 18.5 mm. Front or rear.Porsche 924 2.0L 1976-1985 FRONT
Porsche 924 S 2.5L 09/1985-07/1988 REAR
Porsche 928 4.5L 09/1977-08/1982 REAR
Porsche 928 S / S2 4.7L 09/1978-12/1985 REAR
Porsche 944 2.7L 11/1988-08/1989 REAR
Porsche 944 2.5L 06/1981-12/1990 REAR
Porsche 944 S 2.5L 08/1986-07/1988 REAR
Brake System: Teves
Thickness: 18.5 [mm]
Wear Warning Contact: Prepared for wear indicator
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94435295102BRE
94435295102
P65003
1663600317
92835295102
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
£35.00 inc. VAT
Now £31.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
94435295201/1
Product Information
This rear brake pad hardware kit is an replacement set of brake pad retaining pins and associated mounting hardware designed to match original Porsche specification for rear calipers on classic Porsche 924 and 944 models. It includes the essential retaining pins and spring plates that hold the rear brake pads securely in place within the caliper carrier, engineered to the same size and fit as the factory parts.
One brake pad pin kit is for both rear calipers
Fits:
Porsche 924 1977 - 1988
Porsche 944 1982 - 1991
Diagram ref no 5.
The hardware kit ensures that the brake pads are properly aligned and held under controlled tension in the rear brake caliper. Correct hardware helps the pads slide freely when the caliper applies braking force, promotes even brake pad wear, and minimises noise or vibration during normal and heavy braking.
Function. Brake pad retaining pins and springs are critical for:
• Securing brake pads in their correct position
• Allowing smooth pad movement under braking action
• Reducing chatter or rattling noises
• Helping ensure even pad wear and predictable brake feel
Without properly functioning hardware, brake pads can bind or mis-align, which may lead to premature pad wear or reduced braking performance.
Over time, brake pad hardware can become corroded, bent, seized, or worn, especially in older Porsche brake systems. Deteriorated hardware can cause:
• Brake noise (squeal or rattle)
• Uneven pad wear or binding
• Reduced smoothness in brake response
• Premature wear of pads or rotors.
Replacing the hardware with an OE Match kit restores proper pad guidance and alignment, helping retain braking performance, reduce noise, and prolong the life of pads and rotors.
When to replace.
Replace this rear brake hardware kit if:
• Pins or springs show corrosion, pitting, bending, or wear
• Brake pads are binding or not sliding freely
• Noises are heard when braking
• Pads are replaced and hardware has not been serviced
• Routine brake system maintenance is performed
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94435295201
The product you are viewing cross references to these numbers
Product Information
Brake pad pin ki, REAR.This rear brake pad hardware kit is an replacement set of brake pad retaining pins and associated mounting hardware designed to match original Porsche specification for rear calipers on classic Porsche 924 and 944 models. It includes the essential retaining pins and spring plates that hold the rear brake pads securely in place within the caliper carrier, engineered to the same size and fit as the factory parts.
One brake pad pin kit is for both rear calipers
Fits:
Porsche 924 1977 - 1988
Porsche 944 1982 - 1991
Diagram ref no 5.
The hardware kit ensures that the brake pads are properly aligned and held under controlled tension in the rear brake caliper. Correct hardware helps the pads slide freely when the caliper applies braking force, promotes even brake pad wear, and minimises noise or vibration during normal and heavy braking.
Function. Brake pad retaining pins and springs are critical for:
• Securing brake pads in their correct position
• Allowing smooth pad movement under braking action
• Reducing chatter or rattling noises
• Helping ensure even pad wear and predictable brake feel
Without properly functioning hardware, brake pads can bind or mis-align, which may lead to premature pad wear or reduced braking performance.
Over time, brake pad hardware can become corroded, bent, seized, or worn, especially in older Porsche brake systems. Deteriorated hardware can cause:
• Brake noise (squeal or rattle)
• Uneven pad wear or binding
• Reduced smoothness in brake response
• Premature wear of pads or rotors.
Replacing the hardware with an OE Match kit restores proper pad guidance and alignment, helping retain braking performance, reduce noise, and prolong the life of pads and rotors.
When to replace.
Replace this rear brake hardware kit if:
• Pins or springs show corrosion, pitting, bending, or wear
• Brake pads are binding or not sliding freely
• Noises are heard when braking
• Pads are replaced and hardware has not been serviced
• Routine brake system maintenance is performed
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94435295201
94435295200
94435295201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
£21.00 inc. VAT
Now £18.90 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
BRAKEKIT944.1.R.ABS
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT944.1.R.ABS
The product you are viewing cross references to these numbers
Product Information
Rear Brake pads and brake disc package. Porsche 944 Cars without ABS Porsche 944 2.5L 1982-85 Cars without ABS - REAR
Porsche 924 S / Turbo / GT Cars without ABS - REAR
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT944.1.R.ABS
94435204105
94435295102
94461221104
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Brake disc rotor Rear. Porsche 944 / 924S / 924Turbo / 924GT Cars without ABS (94435204105ABS)
2 x Brake pad wear sensor. Porsche 944 / 944 Turbo (94461221104/1)
1 x Brake pads, Front or rear. Porsche 928 / 924 / 944 (94435295102ABS)
Vehicle Group
Vehicle Group
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
£106.90 inc. VAT
Now £96.20 inc. VAT
In Stock - 24 Hour Dispatch
BRAKEKIT944.1.R.SEB
Product Information
With Brembo brake pads
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT944.1.R.SEB
The product you are viewing cross references to these numbers
Product Information
Rear Brake pads and brake disc package. Porsche 944 Cars without ABS With Brembo brake padsPorsche 944 2.5L 1982-85 Cars without ABS - REAR
Porsche 924 S / Turbo / GT Cars without ABS - REAR
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT944.1.R.SEB
94435204105
94435295102
94461221104
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Brake disc rotor Rear. Porsche 944 / 924S / 924Turbo / 924GT Cars without ABS (94435204105SEB)
2 x Brake pad wear sensor. Porsche 944 / 944 Turbo (94461221104/1)
1 x Brake pads, Front or rear. Porsche 924 / 928 / 944 (94435295102BRE)
Vehicle Group
Vehicle Group
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
£186.68 inc. VAT
Now £168.00 inc. VAT
In Stock - 3- 5 Days Dispatch
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information