Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
distributor Genuine Porsche part 930602021FX
Code: 930602021FX
Genuine Porsche part
distributor
Additional information:
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Price: £903.47 inc. VAT
Orderable - 14 - 28 Days
Related products
930602015AX/1
Product Information
Fits:
Porsche 964 C2 / C4 1989-94
Porsche 993 C2 / C4 / C2S / C4S 1994-98
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602015AX
The product you are viewing cross references to these numbers
Product Information
Reconditioned Distributor.
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £250.00 will be held and then refunded when the old one is returned.
Reconditioned units are sold on an exchange basis, A surcharge of £250.00 will be held and then refunded when the old one is returned.
Fits:
Porsche 964 C2 / C4 1989-94
Porsche 993 C2 / C4 / C2S / C4S 1994-98
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602015AX
93060201500
930602015ax
93060201501
930602015AX
930602015AX
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
930602021FX
Product Information
Reconditioned Distributor for USA cars.
Fits:
Porsche 911 SC 1980-83 USA cars (930.07/08/16/17)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602021FX
The product you are viewing cross references to these numbers
Product Information
Reconditioned Distributor for USA cars.
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £910.00 will be held and then refunded when the old one is returned.
Reconditioned units are sold on an exchange basis, A surcharge of £910.00 will be held and then refunded when the old one is returned.
Fits:
Porsche 911 SC 1980-83 USA cars (930.07/08/16/17)
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602021FX
930602021FX
93060202106
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
Price: £903.47 inc. VAT
+ £910.00 surcharge
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
930602021DX/1
Product Information
Porsche 911 1978-89.
Fits:
Porsche 911 SC 1978-83
Porsche 930 3.0ltr 1975-77 (US cars only)
Porsche 930 3.3ltr 1978-89 (US cars only)
New Perma Tune GEN 6 unit.
Bespoke distributor for the 911SC 3.0ltr engine and other engines like the Porsche Turbo 930 that use the six pin ignition module (CDI) and CIS injection
6 pin CDI was used from 1978 - 1983 on 911 and 1978 - 1989 on the turbo
The Perma-Tune distributor is an exact fit, replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor.
The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance, retard, vacuum and boost functions.
On Turbo cars the vacuum/boost timing control can is very prone to leaks and the vacuum switches and manifold boost valves connected to the can are failure prone as well.
When these parts fail, performance deteriorates and fuel is wasted. These parts are bypassed by connecting the manifold hose directly to the MAP sensor of the distributor.
It just doesn't get any easier than this.
The distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look. It is very common on the Porsche 911 cars to develop engine misfire problems due to the brittle and deteriorating green shielded wire between the ignition distributor and module.
The defective wiring is replaced at the same time the new distributor is installed which cures two ills at once.
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune distributor.
There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done There is no way to make a mistake with this installation, the connectors will only plug in the right way.
The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602021DX
The product you are viewing cross references to these numbers
Product Information
Distributor and harness for 911 SC and turbo with 6 PIN CDI box (US cars)Porsche 911 1978-89.
Fits:
Porsche 911 SC 1978-83
Porsche 930 3.0ltr 1975-77 (US cars only)
Porsche 930 3.3ltr 1978-89 (US cars only)
New Perma Tune GEN 6 unit.
Bespoke distributor for the 911SC 3.0ltr engine and other engines like the Porsche Turbo 930 that use the six pin ignition module (CDI) and CIS injection
6 pin CDI was used from 1978 - 1983 on 911 and 1978 - 1989 on the turbo
The Perma-Tune distributor is an exact fit, replacement part that will drop right into the engine. Setting the static timing is easy with the built in trigger point LED that lets you know when the rotor is pointing in the right direction.
Idle timing is set in exactly the same way as the factory manual indicates and the factory mechanical and vacuum curves are preprogrammed into the distributor.
The mechanical vacuum can is replaced with a reliable MAP sensor that is fully programmable to perform advance, retard, vacuum and boost functions.
On Turbo cars the vacuum/boost timing control can is very prone to leaks and the vacuum switches and manifold boost valves connected to the can are failure prone as well.
When these parts fail, performance deteriorates and fuel is wasted. These parts are bypassed by connecting the manifold hose directly to the MAP sensor of the distributor.
It just doesn't get any easier than this.
The distributor harness is made using the same vinyl sleeve loom construction as the original wiring for that factory original look. It is very common on the Porsche 911 cars to develop engine misfire problems due to the brittle and deteriorating green shielded wire between the ignition distributor and module.
The defective wiring is replaced at the same time the new distributor is installed which cures two ills at once.
Distributors wear out and rob your engine of the horsepower it was intended to produce. Worse yet, they can leave you stranded or even damage the crankshaft ring gear.
Forget about rebuilding an outdated distributor with hard to find parts when you can replace it with modern technology that looks original. Replacing that worn out distributor has never been easier with the Perma-Tune distributor.
There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done There is no way to make a mistake with this installation, the connectors will only plug in the right way.
The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602021DX
0237301001
0237301002
0237301007
0237301009
0237302034
0237302045
0237303003
0237304016
0237306001
0237505001
91160202109
93060201002
93060202100
93060202102
93060202104
93060202106
93060202300
93060210400
93060292300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: £845.00 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
IGNITIONKITSCB
Product Information
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Basic
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models: Premium ignition module and the Basic ignition module. The Basic model is just that, basic: it performs only the same functions as the analog modules did back in the day. For the average street car, this may be all that is desired and of course is more affordable than the Premium model. It is however still a high performance part and is perfect for racing venues that do not allow programmable digital ignition systems. The Basic model has a smooth, more original looking housing than the Gen 5 cast housing.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCB
The product you are viewing cross references to these numbers
Product Information
Ignition kit with basic 6 pin CDI (HKZ) module. Porsche 911SC and turbo Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Basic
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models: Premium ignition module and the Basic ignition module. The Basic model is just that, basic: it performs only the same functions as the analog modules did back in the day. For the average street car, this may be all that is desired and of course is more affordable than the Premium model. It is however still a high performance part and is perfect for racing venues that do not allow programmable digital ignition systems. The Basic model has a smooth, more original looking housing than the Gen 5 cast housing.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCB
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 6 Pin CDI ignition module. Porsche 911 911 turbo (USA) 1978-89 basic version (93060270200/4
1 x Distributor and harness for Porsche 911 SC and 911 turbo (USA) 1978-1989 (930602021DX/1
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (PCG602502A/3
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: £1,419.00 inc. VAT
Due In 12 Days
IGNITIONKITSCP
Product Information
Fits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models:Premium ignition module and the Basic ignition module.
The Premium ignition module features a smooth, matt finish that mimics the patina of the original aluminum die cast part. It provides full control over RPM limit, mechanical advance timing, power output, multi spark function and has many other features that can be programmed using a computer, tablet or smart phone. This module comes preprogrammed for the Porsche 911SC so programming changes are optional. The Gen 6 Premium Perma-Tune makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights. These LED lights assist in diagnosing both the vehicle and the ignition module. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light. This LED is especially useful for detecting intermittent engine misfire caused by wiring or distributor problems. The LED function lights are mounted in the harness electrical connector and can only be seen when the module is powered up. There are three self-resetting overload protectors that assist in troubleshooting while protecting your Perma-Tune from damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part. Refer to the Diagnostics section of this web site for more information about the diagnostics system and overload protectors.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCP
The product you are viewing cross references to these numbers
Product Information
Ignition kit with Premium 6 pin CDI (HKZ) module. Porsche 911SC and turboFits
Porsche 911 SC 1978-1983
Porsche 911 turbo 3.3ltr 1978-1989 (US cars)
Perma-Tune Gen 6
Replace those tired and worn ignition components with this Ignition Kit
Contents of Kit
6 Pin CDI Module - Premium Version
Distributor with Harness
Ignition Coil
CDI Module
The Gen 6 Perma-Tune for the 911SC comes in two models:Premium ignition module and the Basic ignition module.
The Premium ignition module features a smooth, matt finish that mimics the patina of the original aluminum die cast part. It provides full control over RPM limit, mechanical advance timing, power output, multi spark function and has many other features that can be programmed using a computer, tablet or smart phone. This module comes preprogrammed for the Porsche 911SC so programming changes are optional. The Gen 6 Premium Perma-Tune makes diagnostics easier by providing onboard diagnostics that are automatically displayed by two coloured LED function lights. These LED lights assist in diagnosing both the vehicle and the ignition module. The green LED is a status indicator that can flash diagnostic fault codes. The red LED is a strobe light that flashes each time the coils fires in the same manner as a timing light. This LED is especially useful for detecting intermittent engine misfire caused by wiring or distributor problems. The LED function lights are mounted in the harness electrical connector and can only be seen when the module is powered up. There are three self-resetting overload protectors that assist in troubleshooting while protecting your Perma-Tune from damage. The overload protectors are hidden underneath the ignition module so they do not spoil the original look of the part. Refer to the Diagnostics section of this web site for more information about the diagnostics system and overload protectors.
Distributor
Replacing that worn out distributor has never been easier with the Perma-Tune Bespoke distributor for the 911SC 3.0L engine and other engines like the Porsche Turbo 930 that use the six pin ignition module. There are no wires to cut and splice: the distributor has the electrical harness built in and features the original equipment compatible connectors for a plug and play installation. Simply unplug the car harness connector from the ignition module and plug it into the matching connector of the distributor harness. Then plug the distributor harness connector into the Perma-Tune module and done. There is no way to make a mistake with this installation, the connectors will only plug in the right way. The harness connector has built in diagnostics lights that tell you when the ignition system has power and when the ignition module is making sparks. The blue connector LED is a power indicator and the red connector LED is a strobe light that flashes each time the ignition system makes a spark, just like a timing light.
Ignition Coil
he Perma-Tune Black Ignition Coil is specifically designed to operate with all Perma-Tune modules to maximize the performance and service life of your Perma-Tune ignition module. It has the period correct look for the Porsche 911SC with a brown top and black body and will fit the original mounting bracket and wiring harness of the car.
The Black ignition coil is very rugged and can resist the heat and vibration that it will encounter on a classic car engine. Triple seals insure that the dielectric oil inside the coil will not leak out. The high Voltage tower is extra thick to resist arcing and will still fit the original spark plug wire boot. The internal components of the coil are designed to resist deterioration to provide a long life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKITSCP
93060270200
93060270200
930602021DX
930602021DX
90160250200
90160250200
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x 6 Pin CDI ignition module. Porsche 911 / 911 turbo (USA) 1978-89 premium version (93060270200/3
1 x Distributor and harness for Porsche 911 SC and 911 turbo (USA) 1978-1989 (930602021DX/1
1 x Ignition coil Porsche 911 1969-83 & 930 1975-89 PermaTune (PCG602502A/3
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: £1,479.00 inc. VAT
Due In 12 Days
96499320
Product Information
Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96499320
The product you are viewing cross references to these numbers
Product Information
Distributor drive belt warning kit. Porsche 964 / 993Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Product Description
This kit warns the Porsche 964/993 driver of a catastrophic distributor belt failure. The failure of the secondary distributor head drive belt will result in severe damage to the engine if the car is continued to be driven with a broken belt. The kit integrates with the existing engine cooling system fan belt warning system.
Once installed, if the distributor belt breaks, the fan belt warning light will illuminate on the car’s dashboard. A Visual inspection of the engine bay will reveal if the reason the dashboard light illuminated is a broken fan belt or broken distributor belt.
Kit Includes:
• Cover with integrated control electronics
• Set of connection cables
• Cable ties
• 2 x Neodymium magnets (5x4x2), pre-assembled in shrink tubing
• 1 tube of adhesive gel (20-30 seconds drying time for gluing the magnets)
• 1 retaining plate for sensor element (blue anodized aluminum plate)
• 1 sensor element assembly
• 1 alcohol cleaning pad (for cleaning the adhesive surfaces of the metal tabs in the distributor)
Please Note
Distributor not included in kit
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96499320
930602015AX
93060201501
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Choose Version
Prices from: £555.95 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
93060291501/1
Product Information
Fits:
Porsche 911 SC 1980-83 USA cars
A state-of-the-art ignition advance/retard vacuum module, that incorporates the latest in mechatronic and materials technology to restore and improve the performance of your 911SC’s original distributor. The integrated stand-alone computer controlled motion system enables faster starts, smoother acceleration, better throttle response and smoother cruising. No programming required, this amazing unit is truly “Plug and Play”. It comes pre-programmed to respond to your engine’s vacuum signals exactly as the factory engineers intended, so it’s C.A.R.B. compliant. Each unit is individually tested and includes a Certificate of Test to prove it. Easy to follow instructions are included for installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060291501
The product you are viewing cross references to these numbers
Product Information
Mechatronic distributor double vacuum unit Porsche 911 SC 1980-83 USA cars.Porsche 911 SC 1980-83 USA cars
A state-of-the-art ignition advance/retard vacuum module, that incorporates the latest in mechatronic and materials technology to restore and improve the performance of your 911SC’s original distributor. The integrated stand-alone computer controlled motion system enables faster starts, smoother acceleration, better throttle response and smoother cruising. No programming required, this amazing unit is truly “Plug and Play”. It comes pre-programmed to respond to your engine’s vacuum signals exactly as the factory engineers intended, so it’s C.A.R.B. compliant. Each unit is individually tested and includes a Certificate of Test to prove it. Easy to follow instructions are included for installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060291501
93060291501
930602021FX
93060202106
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
£692.00 inc. VAT
Now £622.80 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
930602015AX
Product Information
Reconditioned Double ignition distributor.
Fits:
Porsche 964 Carrera 1989-94 (not turbo)
Porsche 993 Carrera 1995-98 (not turbo)
PLEASE NOTE:
The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer. Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer. Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning. All surcharges and exchanges are subject to our terms and conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602015AX
The product you are viewing cross references to these numbers
Product Information
Reconditioned Double ignition distributor.
Fits:
Porsche 964 Carrera 1989-94 (not turbo)
Porsche 993 Carrera 1995-98 (not turbo)
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
930602015AX
93060201500
93060201501
930602015AX
930602015AU
0 986 237 900
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Price: £1,959.23 inc. VAT
+ £1,639.14 surcharge
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information