Original Porsche Part Genuine Porsche part 91434703100

Track rod inner joint.



Fits:
Porsche 911 1965-89 (Not Turbo)
Porsche 914 1970-76

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Click picture for large parts diagram.
Diagram Ref No 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705701

The product you are viewing cross references to these numbers

New Steering Rack.  Fits LHD and RHD cars. 

OE Ref numbers: 91434701006, 914347010FX

Fits:
Porsche 911 2.0L-3.2L 1969-89
Porsche 914 1.7L-2.0L 1969-76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434701006

The product you are viewing cross references to these numbers

Power steering conversion kit. For cars with and without air conditioning.

*** Special Order Product allow 10 - 14 Days for delivery ***

Fits:
Porsche 911 74-89 LHD

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

For installation instructions:
– cars WITH air conditioning CLICK HERE
– cars WITHOUT air conditioning CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EZPSKITLHD

The product you are viewing cross references to these numbers

Power steering conversion kit. For cars with and without air conditioning.

** Special Order Product allow 10 - 14 Days for delivery **

Fits:
Porsche 911 74-89 RHD fits cars with and without air conditioning

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

For installation instructions please CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EZPSKITRHD

The product you are viewing cross references to these numbers

Track rod inner joint.



Fits:
Porsche 911 1965-89 (Not Turbo)
Porsche 914 1970-76

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Click picture for large parts diagram.
Diagram Ref No 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705701

The product you are viewing cross references to these numbers

Power steering conversion kit.

Fits:
Porsche 911 1967-73 LHD Cars
For cars WITHOUT heater or A/C unit in the smugglers box

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

Speed sensitive power steering is operated via a mechanical speed sensor fitted between the speedo cable and speedo-head that is supplied in the kit.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

Please note: Special Order Product allow 3 - 4 weeks for delivery

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EZPSKITLHDFNOAC

The product you are viewing cross references to these numbers

Power steering conversion kit.

Fits:
Porsche 911 1967-73 RHD Cars
For cars WITHOUT heater or A/C unit in the smugglers box

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

Speed sensitive power steering is operated via a mechanical speed sensor fitted between the speedo cable and speedo-head that is supplied in the kit.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

Please note: Special Order Product allow 3 - 4 weeks for delivery

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EZPSKITRHDFNOAC

The product you are viewing cross references to these numbers