This part number supersedes to 90133314305 Genuine Porsche part 90133314301
Code: 90133314301
Genuine Porsche part
This part number supersedes to 90133314305
Additional information:
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Price: €3.94 inc. VAT
Orderable - 14 - 28 Days
Related products
PFR57-411
Product Information
SET OF 4
Fits:
Porsche 911 1965-67
Fits to No. 16 on the diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-411
The product you are viewing cross references to these numbers
Product Information
Powerflex PFR57-411 Replacement Spring Plate Bush.SET OF 4
Fits:
Porsche 911 1965-67
Fits to No. 16 on the diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-411
PFR57-411
PFR57411
91133300900
91133300902
90133319500
64433313100
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Price: €87.05 inc. VAT
Orderable - 5 to 7 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90133319500
Product Information
Fits:
Porsche 911 1965-67
Diagram Ref No. 26
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133319500
The product you are viewing cross references to these numbers
Product Information
Rear spring plate rubber bush. Fits:
Porsche 911 1965-67
Diagram Ref No. 26
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133319500
90133319500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Price: €40.15 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90133313306
Product Information
Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Diagram ref no 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313306
The product you are viewing cross references to these numbers
Product Information
Rear trailing arm to spring plate eccentric bolt -
M12 x 1,5Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Diagram ref no 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313306
90133313306
90133313304
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €67.98 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90133313310
Product Information
Fits:
Porsche 911/912 1965-73
Diagram ref no 27
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313310
The product you are viewing cross references to these numbers
Product Information
Rear trailing arm to spring plate eccentric bolt. Fits:
Porsche 911/912 1965-73
Diagram ref no 27
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313310
90133313309
90133313310
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Price: €74.06 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90133313305
Product Information
Price is each.
Fits:
Porsche 911/912 1965-89
Porsche 911 (930) 1975-89
Diagram ref no 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313305
The product you are viewing cross references to these numbers
Product Information
Rear trailing arm to spring plate eccentric bolt.Price is each.
Fits:
Porsche 911/912 1965-89
Porsche 911 (930) 1975-89
Diagram ref no 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313305
90133313305
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €74.06 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
90133315300
Product Information
Fits:
Porsche 911 1965-89
Porsche 930 1975-77
Diagram Ref No. 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315300
The product you are viewing cross references to these numbers
Product Information
Spring plate covers normally rust, replacing them will give you a better ride.Fits:
Porsche 911 1965-89
Porsche 930 1975-77
Diagram Ref No. 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315300
90133315300
1652250200
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €86.81 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
21020
Product Information
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21020
The product you are viewing cross references to these numbers
Product Information
QuickChange™ Torsion Bars, REARSold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21020
2102026
2102027
2102028
2102029
2102030
2102031
2102032
2102033
2102034
2102036
2102038
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Select Below
Prices from: €556.92 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
1-PP911R27
Product Information
Plated/Plugged 27mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-PP911R27
The product you are viewing cross references to these numbers
Product Information
Plated & Plugged Hollow Torsion Bars. - REARPlated/Plugged 27mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-PP911R27
PP911R27
1-PP911R27
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Price: €641.22 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
PFR57-411H
Product Information
SET OF 4
Fits:
Porsche 911 1965-67
Fits to No. 16 on the diagram.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-411H
The product you are viewing cross references to these numbers
Product Information
Replacement Spring Plate Bush.SET OF 4
Fits:
Porsche 911 1965-67
Fits to No. 16 on the diagram.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-411H
PFR57-411
PFR57411
PFR57-411H
64433313100
90133319500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
€87.05 inc. VAT
Now €78.34 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
