Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Select your vehicle to check compatibility
Tarett
Tarett
ERP981.009
Product Information
Sold as EACH, 2 required per car
Fits:
Porsche 981 Boxster
Porsche 981 Cayman
Porsche 981 Cayman GT4
The adjustable link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm.
A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response, feedback, and also reduces toe changes during acceleration and deceleration. The result is improved stability and control.
Add boots as an option for extra protection against debris and moisture. Provides the most wheel clearance on the GT4. The complete kit comes as shown.
• Improved stability
• Increased adjustability
• Precision Teflon lined rod ends
• Complete with hardware
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
ERP981.009
The product you are viewing cross references to these numbers
Product Information
Rear toe arm linkSold as EACH, 2 required per car
Fits:
Porsche 981 Boxster
Porsche 981 Cayman
Porsche 981 Cayman GT4
The adjustable link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm.
A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response, feedback, and also reduces toe changes during acceleration and deceleration. The result is improved stability and control.
Add boots as an option for extra protection against debris and moisture. Provides the most wheel clearance on the GT4. The complete kit comes as shown.
• Improved stability
• Increased adjustability
• Precision Teflon lined rod ends
• Complete with hardware
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
ERP981.009
98133104501
98133104502
98133104580
981.009.CLAMP
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Related products
90037805101
Product Information
Designed for the rear axle control arm on Porsche 996 and 997, it provides exact factory fit, strength, and corrosion resistance.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: Part 90037805109 is superseded by 90037805101
This bolt secures the rear suspension control arm to the wheel carrier or subframe, providing the clamping force needed to maintain accurate suspension alignment and minimize movement under load.
Over years of service, high torque loads, vibration, and exposure to road conditions can weaken or corrode suspension bolts. A compromised bolt may lead to improper alignment, handling instability, or noise under braking and cornering.
When to replaces:
• During control arm replacement, alignment service, or rear suspension rebuilds
• If original bolts show corrosion, stretching, or thread wear
• As part of preventive maintenance when reassembling load-bearing suspension joints
Replacing with Genuine Porsche hardware ensures structural integrity, precise fit, and lasting performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
The product you are viewing cross references to these numbers
Product Information
Rear control arm hexagon head bolt, M 14 X 100. Designed for the rear axle control arm on Porsche 996 and 997, it provides exact factory fit, strength, and corrosion resistance.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: Part 90037805109 is superseded by 90037805101
This bolt secures the rear suspension control arm to the wheel carrier or subframe, providing the clamping force needed to maintain accurate suspension alignment and minimize movement under load.
Over years of service, high torque loads, vibration, and exposure to road conditions can weaken or corrode suspension bolts. A compromised bolt may lead to improper alignment, handling instability, or noise under braking and cornering.
When to replaces:
• During control arm replacement, alignment service, or rear suspension rebuilds
• If original bolts show corrosion, stretching, or thread wear
• As part of preventive maintenance when reassembling load-bearing suspension joints
Replacing with Genuine Porsche hardware ensures structural integrity, precise fit, and lasting performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
90037805101
90037805109
The product you are viewing cross references to these numbers
Price: £13.69 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90037805101/1
Product Information
Built to factory specs for the rear axle control arms on 996 and 997 models, they deliver the fit and strength your high-performance suspension deserves.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: 90037805109, 90037805101
Since the control-arm mounting bolt bears major structural loads and undergoes vibration and torque stress, it can become worn, stretched, corroded or fatigued over time. This reduces its ability to maintain correct alignment and clamping force - potentially resulting in handling issues or component wear. Replacement is especially important when performing rear suspension service, control arm replacement, or alignment work. Installing the correct bolt restores reliable mounting integrity and ensures the rear axle geometry remains stable under load.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
The product you are viewing cross references to these numbers
Product Information
Rear control arm hexagon head bolt, M 14 X 100.Built to factory specs for the rear axle control arms on 996 and 997 models, they deliver the fit and strength your high-performance suspension deserves.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: 90037805109, 90037805101
Since the control-arm mounting bolt bears major structural loads and undergoes vibration and torque stress, it can become worn, stretched, corroded or fatigued over time. This reduces its ability to maintain correct alignment and clamping force - potentially resulting in handling issues or component wear. Replacement is especially important when performing rear suspension service, control arm replacement, or alignment work. Installing the correct bolt restores reliable mounting integrity and ensures the rear axle geometry remains stable under load.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
90037805101
90037805109
The product you are viewing cross references to these numbers
£10.55 inc. VAT
Now £9.49 inc. VAT
Due In 11 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information