SmartTOP Roof Top Control for Ford Mustang Convertible

SmartTOP Roof Top Control.



Designed for:
Ford Focus Coupe-Cabriolet 2007+

Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.

Open/Close the top while driving
Open/Close your top while driving. Speed programmable up to 40kmh.

One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.

Individually programmable
Configure functions of the module to meet your personal preferences via our signature blinker setup menu.

Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.

Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.

Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.

Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.

Hazard Signals
Optionally the hazard blinkers are activated while top is operated from the remote.

USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.

E13 Certification: E13 10R - 03 10070
Standby Power: < 0.1mA
Dual color LEDs: YES

Mobil Super™ 3000 x1 Formula FE 5W-30 provides long engine life with enhanced protection over a wide temperature range for many types and ages of vehicles including passenger cars, light commercial vehicles and vans. 

Mobil Super 3000 x1 Formula FE 5W-30 Provides...

- Enhanced high temperature protection
- Enhanced cold start-up performance
- Enhanced engine cleanliness and sludge prevention
- Enhanced wear protection
- Helps fuel economy (as per ACEA A5/B5)
- Suitable for use in both gasoline and diesel engine passenger cars, light commercial vehicles and vans.

Applications

Mobil Super 3000 x1 Formula FE 5W-30 is recommended if you regularly experience demanding conditions where it can help combat the damage caused by frequent high engine stress.

- Mobil Super 3000 x1 Formula FE 5W-30 can be used in a variety of gasoline and diesel automobiles, light trucks and vans designed for use of a low viscosity (HTHS) motor oil.
- Mobil Super 3000 x1 Formula FE 5W-30 is intended primarily to meet the requirements of Ford in all engines requiring WSS-M2C913-D / C and is also suitable for use in Jaguar and Land Rover vehicles where the viscosity and quality claims are appropriate.

Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.

Specifications & Approvals

This product has the following approvals: STJLR.03.5003 & VW VWC 53036
This product is recommended for use in applications requiring: API CF
This product meets or exceeds the requirements of: API SL, API SP, ACEA A5/B5, FORD WSS-M2C913-D

--Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle--

Properties & Specifications

Grade: SAE 5W-30
Density @ 15.6°C (ASTM D4052): 0.849 g/ml
Flash Point (Cleveland Open Cup, ASTM D92): 229°C
Kinematic Viscosity @ 100°C (ASTM D445): 9.7 mm²/s
Kinematic Viscosity @ 40°C (ASTM D445): 52.9 mm²/s
Viscosity Index (ASTM D2270): 170
Pour Point (ASTM D97): -36°C

Need more info? Check out Porsche Oils Overview our for everything you need to know about choosing the right oil. 

iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

iCarsoft CR MAX BT is a professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 vehicle makes) developed by iCarsoft technology inc. 
With a 7.0" LCD capacitive touchscreen that displays at 1024x600 quality with the ability to quickly read and clear DTCS for all available modules for the majority of makes and models on the market, the CR MAX provides you with superior special functions. 

It features full ECU diagnosis for most vehicle brands and test modes mainly includes: CANBUS, ISO9141, KWP2000, AND J1850 etc.

It enables technicians to accurately diagnose complex problems 

Product Features

1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &Clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they stay pointing straight forward, and don’t turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. DTC library to look up when user is operating this tool.
23. Support Freeze Frame of Fault Code functions.
24. Automatic software upgrade.
25. Easy to feedback test questions online.
26. Provides convenient instruction with customer in interface.
27. Multi-language: English, German, Dutch, Spanish, French. (More languages will be added in the future.) Note!
*Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
*This scan tool covers 20 years models, so some functions may not be available on all years /models.
*We reserve the rights to make any change to this description without notice.

Operating System: Android 8.1.0
Processor: Quad-core 1.3 GHZ
Memory：16GB
Display：7-inch LCD Capacitive touchscreen with 1024x600 resolution
Connectivity: Mini USB 2.0/ USB2.0/ Wi-Fi / Bluetooth/OBD II
Body Colour: Black
Audio Output: Buzzer and Speaker
Input: N/A
Power and Battery: 3.7 V/5000MAH Lithium-Polymer battery
Charges Via 5 VDC Power Supply: 0BD DLC Voltage Range:9-18V
Test battery life: Around 5 hours of continuous use
Battery  Charger:5V/2A
Power Consumption:500MA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp: 0 to 40° C (32 TO 104°F)
Storage Temp:-20 TO 70° C(-4 TO 158°F)
Operating Humidity: 5%-95% Non-condensing
Dimensions (W*H*D): 40.0MM*150.0MM*35.0MM
Net Weight:750G