Rear Beam Bushing (FRONT LEFT / RIGHT, INSERT). Porsche 970 Panamera 2009-16  ❭  97033125704A

The Rear Beam Bushing (Front Left / Right, Insert)  is a high-quality suspension bushing insert set designed to restore correct mounting and vibration isolation at the front left and front right mounting points of the rear axle beam / rear crossmember on compatible Porsche models. These inserts fit into the front positions of the rear beam bushing housings, providing a stable yet cushioned connection between the rear beam assembly and the vehicle’s chassis.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
• Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16  

Rear beam bushing inserts play an important role in reducing noise and vibration while helping maintain correct rear suspension geometry under load. Over time, the bushing material can harden, crack, or deform due to age, heat, and constant suspension movement. Worn inserts may cause clunking noises, increased harshness, rear-end instability, and uneven tyre wear caused by alignment changes.

What This Product Does:

• Provide damped support between the rear axle beam and the vehicle’s body/chassis
  
• Help absorb vibration and road harshness before it reaches the cabin
  
• Ensure consistent rear suspension geometry under load
  
• Reduce noise and vibration from rear suspension movement
• Support stable rear handling and ride comfort

Noise & Comfort Issues

• Clunking, knocking, or thudding noises from the rear suspension
• Increased vibration felt through the floor or rear seats
• Buzzing or vibration at certain speeds

Handling & Stability Changes

• Rear end instability or “wandering” feel at higher speeds
• Poor response in rear handling during turns
• Uneven tyre wear due to alignment variation

Wear / Physical Signs

• Visible hardening, cracking, or splitting of the bushing material
• Excessive movement at the rear beam connection when inspected
• Flat, deformed, or deteriorated rubber/elastomer inserts

• New inserts absorb vibration and road shock better than old, hardened bushings — leading to a smoother and quieter ride.
• Properly functioning bushings help keep the rear axle beam aligned, preserving handling balance and tyre contact.
• Replacing worn inserts eliminates clunking and vibration caused by excessive movement in the rear beam mount.
• A solid rear beam connection reduces stress on differential mounts, trailing arms, and other suspension links.