Front Control / A-Arm Bushing Kit. Porsche 911 / 912 / 914 1969-76 - 91134190100
Prekom
91134190100/4
Product Information
These bushings mount the front lower control arms (A-arms) to the chassis, providing a flexible yet stable connection that absorbs vibration and maintains suspension geometry. Over time, the original rubber bushings harden and crack, allowing unwanted movement and degrading handling performance.
Fits On To Diagram Ref No 12
What This Product Does:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134190100
The product you are viewing cross references to these numbers
Product Information
Front Control / A-Arm Bushing Kit.These bushings mount the front lower control arms (A-arms) to the chassis, providing a flexible yet stable connection that absorbs vibration and maintains suspension geometry. Over time, the original rubber bushings harden and crack, allowing unwanted movement and degrading handling performance.
Sold As A Set Of 4.
Fits:
- Porsche 911 1969-1969 2.0L / 912 SWB (F)
- Porsche 911 1970-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 914 (1970-1976)
Fits On To Diagram Ref No 12
What This Product Does:
- Dampens vibration & absorbs shock — the bushings isolate the control arm from chassis vibrations and road shocks, reducing noise and harshness.
- Allows controlled flexibility / movement — they permit controlled pivoting of the control arm through vertical suspension motion while resisting lateral or unwanted movement.
- Maintains proper alignment & geometry — helps keep toe, camber, and other alignment settings consistent during driving, especially under load or when cornering.
- Prevents steering looseness / play — worn bushings lead to slack in the steering linkage; fresh bushings restore tightness and responsiveness.
Common Symptoms Of Failure:
- Clunking or knocking noises at the front when hitting bumps or during braking
- Steering play or vague / wandering steering feel
- Uneven or accelerated tire wear, particularly on front tyres
- Front-end instability or wandering under braking
- Changes in handling / alignment after driving or over repeated impacts
- Vibration or shimmy through steering, especially at speed or in corners
- Restores precise steering response — new bushings eliminate slack and restore firm control arm connection.
- Maintains correct alignment — stable bushings ensure geometry does not shift under load, preserving tyre wear and handling consistency.
- Reduces noise / vibration — fresh bushings better absorb shocks, lowering noise, vibration, harshness from suspension movement.
- Improves safety and feedback — tight control arms give more predictable, confident handling.
- Prevents further damage — worn bushings transmit abnormal loads to ball joints, tie rods, control arms, and chassis mounting points.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134190100
91134190100
91134190200
91134190101
91134190201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 914 (1970-1976)
Price: €128.70 inc. VAT
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
2020903
Product Information
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2020903
The product you are viewing cross references to these numbers
Product Information
Split bushing removal tool. 1 req'd per lifetime.Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2020903
2020903
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price: €175.50 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
