Porsche > 992 (911) MK1 2019-2024 > 992 Speedster 4.0L > Suspension & Axle > Shock Absorber Parts FRONT >

Lift kit spacer set for steel springs 3 inch. Porsche 958 Cayenne / VW Touareg (steel spring)

Lift kit spacer set for steel springs 3 inch. Porsche 958 Cayenne / VW Touareg (steel spring) - EWOCTQLK22

15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

Eurowise

EWOCTQLK22

Product Information

Lift kit spacer set 3 inch for cars with steel coil spring suspension.
Set of for Front and Rear suspension

Fits:
Porsche Cayenne (958) 2011-2018 (with steel coil spring suspension)
VW Touareg 2011-2018 (with steel coil spring suspension)

Eurowise 3-inch lift kit for the second generation Porsche Cayenne and VW Touareg

Machined from a solid block of 6061 aluminium, these lift kits will never wear out or fail.

This is a direct bolt on lift kit that installs over the top of the OEM Strut in the front and between the upper strut mount and the spring on the rear. Requires removal of front and rear strut assembly and dropping of both subframes. Front struts do not require disassembly.

What's different about our kit vs. the competitors? We include an shock shaft extension that accounts for the spacer that you install between the spring and strut mount. This keeps your spring rate, shock travel, and ride quality the same as OE. This also translates into better performance on the trails.

Strut extensions come with the option for vehicles with and without electronic dampening. To install the connector must be depinned, the harness fed through the center of the extension, and then the connector can be reassembled.

Kit Includes:
Front Spacers w/ Hardware
(2) Rear Spacers
(2) Rear Shock Extensions
(1) Loctite for Rear Shock Extension
(1) 1" Subframe Drop Kit

Install at your own discretion, professional installation recommended. We are not responsible for any damages that may occur of improper install and/or use.

NOTE: The physical thickness of the billet spacers do not reflect the actual lift height. So do not be alarmed if your spacer is not 3" thick

Enter your VAT number here and click Verify:

Lift kit spacer set for steel springs 3 inch. Porsche 958 Cayenne / VW Touareg (steel spring)