Gearbox cylindrical roller bearing. Porsche 911 / 924 - 93030239101
OE Match
93030239101/1
Product Information
Cylindrical Roller Bearing, Engineered to match the original equipment’s dimensions, load rating and fitment, this bearing provides a direct-fit replacement for the factory unit. This bearing supports the main shaft or input/output shaft of certain Porsche manual gearboxes. It ensures smooth rotation, proper alignment of the transmission internals and helps reduce friction and wear during operation. It used near the collar nut or locknut area.
Fits:
Porsche 911 3.2L 1984-86 for 4 and 5-speed models
Porsche 911 Turbo 3.0L 1975-77
Porsche 911 Turbo 3.3L 1978-88 (4 speed)
Porsche 924 1976-85 Only 5 speed transmission
Porsche 924 Carrera GT 1981
Porsche 924 Turbo 1979-84
Diagram ref no 23
Transmission bearings support rotating shafts and gear clusters under high loads and speeds. Over time wear, misalignment or contamination in the gearbox can cause bearing failure, leading to increased friction, vibration, noise or even gearbox damage. Correct bearing fit is essential for longevity and precision of the transmission.
When to replace:
• During any gearbox overhaul or rebuild, especially when shafts or collar nuts are removed.
• If you notice unusual gearbox noises (rumbling, growling) or shaft play during inspection.
• Whenever replacing major gearbox components—such as synchros, shafts, or other bearings—as a preventive maintenance measure, ensuring optimal alignment and performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93030239101
The product you are viewing cross references to these numbers
Product Information
Cylindrical roller bearing located nearest the lock / collar nutCylindrical Roller Bearing, Engineered to match the original equipment’s dimensions, load rating and fitment, this bearing provides a direct-fit replacement for the factory unit. This bearing supports the main shaft or input/output shaft of certain Porsche manual gearboxes. It ensures smooth rotation, proper alignment of the transmission internals and helps reduce friction and wear during operation. It used near the collar nut or locknut area.
Fits:
Porsche 911 3.2L 1984-86 for 4 and 5-speed models
Porsche 911 Turbo 3.0L 1975-77
Porsche 911 Turbo 3.3L 1978-88 (4 speed)
Porsche 924 1976-85 Only 5 speed transmission
Porsche 924 Carrera GT 1981
Porsche 924 Turbo 1979-84
Diagram ref no 23
Transmission bearings support rotating shafts and gear clusters under high loads and speeds. Over time wear, misalignment or contamination in the gearbox can cause bearing failure, leading to increased friction, vibration, noise or even gearbox damage. Correct bearing fit is essential for longevity and precision of the transmission.
When to replace:
• During any gearbox overhaul or rebuild, especially when shafts or collar nuts are removed.
• If you notice unusual gearbox noises (rumbling, growling) or shaft play during inspection.
• Whenever replacing major gearbox components—such as synchros, shafts, or other bearings—as a preventive maintenance measure, ensuring optimal alignment and performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93030239101
16967
93030239101
93030239100
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
£179.00 inc. VAT
Now £161.10 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
99905213800
Product Information
Fits:
Porsche 928 S4 / CS / GT / GTS 1987-95
Manual Transmission
Click 'Zoom in' for large parts diagram.
Diagram ref no. 26
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905213800
The product you are viewing cross references to these numbers
Product Information
Deep groove ball bearing.Fits:
Porsche 928 S4 / CS / GT / GTS 1987-95
Manual Transmission
Click 'Zoom in' for large parts diagram.
Diagram ref no. 26
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905213800
99905213800
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Price: £278.26 inc. VAT
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
99905902702
Product Information
Fits:
Porsche 911 1969-1971*
Porsche 911 1972-1989
Porsche 912 1969 *
Porsche 912E 1976
Porsche 914 1970-1976
Porsche 930 Turbo 1976-1989
Porsche 911 (964) C2 1989-1994 (rear right only)
Porsche 911 (964) Turbo 1990-1994 (rear right only)
Porsche 911 (993) 1995-1998 (rear right only)
Porsche 924 1976-1985
Porsche 928 1978-1995
* For models with magnesium pressure cast housing.
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905902702
The product you are viewing cross references to these numbers
Product Information
Rear left and right differential carrier bearing.Fits:
Porsche 911 1969-1971*
Porsche 911 1972-1989
Porsche 912 1969 *
Porsche 912E 1976
Porsche 914 1970-1976
Porsche 930 Turbo 1976-1989
Porsche 911 (964) C2 1989-1994 (rear right only)
Porsche 911 (964) Turbo 1990-1994 (rear right only)
Porsche 911 (993) 1995-1998 (rear right only)
Porsche 924 1976-1985
Porsche 928 1978-1995
* For models with magnesium pressure cast housing.
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905902702
99905902700
99905902702
99905902800
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Price: £111.46 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99905902702/1
Product Information
This tapered roller bearing, also known as a differential carrier bearing, is used in the rear output assemblies of the differential and manual transmission on various classic Porsche models. Engineered as a precise OE replacement, it meets the original Porsche specifications for dimensions, load capacity, and tolerance. The bearing installs directly without modification, restoring proper carrier alignment, support, and smooth drivetrain operation.
Sold individually.
Fits:
Porsche 911 1969-1971 * with magnesium pressure cast housing
Porsche 911 1972 - 1989
Porsche 912 1969 * with magnesium pressure cast housing
Porsche 912E 1976
Porsche 914 1970 - 1976
Porsche 930 Turbo 1976-1989
Porsche 911 (964) C2 1989 - 1994 (rear right only)
Porsche 911 (964) Turbo 1990 - 1994 (rear right only)
Porsche 911 (993) 1995 - 1998 (rear right only)
Porsche 924 1976 - 1985
Porsche 928 1978 - 1995
Diagram ref no 8
• Function: This bearing supports and aligns the differential carrier or manual transmission rear output shaft, allowing smooth rotation under load and controlling radial/axial movement of the carrier assembly. It ensures the differential or transmission output runs true, quietly and with minimal friction.
• Position on Car: Usually located in the manual transmission/differential rear housing (for example in the rear of the 911 manual gearbox, or the transaxle/differential carrier area). It may serve as the bearing between the carrier housing and the output shaft or differential ring-gear carrier.
• This part is critical for proper gear meshing, quiet running, bearing life and overall driveline integrity.
With age and use, the bearing can develop wear in its rollers/races, looseness, noise, increased friction, or misalignment. A worn bearing may lead to drivetrain noise, vibration, premature gear or bearing damage, loss of efficiency, or catastrophic failure. The bearing supports the differential carrier output shaft – incorrect bearing performance can result in excessive play, wobble, and stress on neighbouring components.
When to Replace:
• During a differential or transmission rebuild, where the carrier, output shafts or bearings are being replaced — it’s best practice to install new bearings.
• If you detect noise (growl, whine, hum) coming from the rear differential or output area, particularly under load or at higher speed. If there is measurable play / movement in the differential carrier or abnormal backlash in the gearset. If you notice metal debris, “bearing-noise” or vibration emanating from the drivetrain output / differential area.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905902702
The product you are viewing cross references to these numbers
Product Information
Rear left and right differential carrier bearing.This tapered roller bearing, also known as a differential carrier bearing, is used in the rear output assemblies of the differential and manual transmission on various classic Porsche models. Engineered as a precise OE replacement, it meets the original Porsche specifications for dimensions, load capacity, and tolerance. The bearing installs directly without modification, restoring proper carrier alignment, support, and smooth drivetrain operation.
Sold individually.
Fits:
Porsche 911 1969-1971 * with magnesium pressure cast housing
Porsche 911 1972 - 1989
Porsche 912 1969 * with magnesium pressure cast housing
Porsche 912E 1976
Porsche 914 1970 - 1976
Porsche 930 Turbo 1976-1989
Porsche 911 (964) C2 1989 - 1994 (rear right only)
Porsche 911 (964) Turbo 1990 - 1994 (rear right only)
Porsche 911 (993) 1995 - 1998 (rear right only)
Porsche 924 1976 - 1985
Porsche 928 1978 - 1995
Diagram ref no 8
• Function: This bearing supports and aligns the differential carrier or manual transmission rear output shaft, allowing smooth rotation under load and controlling radial/axial movement of the carrier assembly. It ensures the differential or transmission output runs true, quietly and with minimal friction.
• Position on Car: Usually located in the manual transmission/differential rear housing (for example in the rear of the 911 manual gearbox, or the transaxle/differential carrier area). It may serve as the bearing between the carrier housing and the output shaft or differential ring-gear carrier.
• This part is critical for proper gear meshing, quiet running, bearing life and overall driveline integrity.
With age and use, the bearing can develop wear in its rollers/races, looseness, noise, increased friction, or misalignment. A worn bearing may lead to drivetrain noise, vibration, premature gear or bearing damage, loss of efficiency, or catastrophic failure. The bearing supports the differential carrier output shaft – incorrect bearing performance can result in excessive play, wobble, and stress on neighbouring components.
When to Replace:
• During a differential or transmission rebuild, where the carrier, output shafts or bearings are being replaced — it’s best practice to install new bearings.
• If you detect noise (growl, whine, hum) coming from the rear differential or output area, particularly under load or at higher speed. If there is measurable play / movement in the differential carrier or abnormal backlash in the gearset. If you notice metal debris, “bearing-noise” or vibration emanating from the drivetrain output / differential area.
• When you upgrade or service the manual transmission/differential – matching new components with new bearings ensures optimum alignment, longevity and performance.
Replacing this bearing means you restore correct support and alignment, minimise noise, protect the differential and improve durability. This part is critical for proper gear meshing, quiet running, bearing life and overall driveline integrity.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905902702
99905902700
99905902702
99905902800
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
£65.00 inc. VAT
Now £58.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
