Control arm rear with ball joint. Porsche Boxster 987 / Cayman/ 996 / 997 - 99733104505
OE Match
99733104505/3
Product Information
The high-quality replacement built to OE specifications, it delivers the same fit, strength, and performance as the original part. This suspension component connects the wheel hub to the chassis, maintaining proper alignment and ensuring stable handling.
Fits:
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster - 2005 to 2012
Porsche 987c Cayman - 2006 to 2012
Porsche 996 C2 / C4 - 1997 to 2005
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3 - 1999 to 2005
Porsche 997 MKI - 2006 to 2009
Porsche 997 GT3 - 2006 to 2009
Diagram ref no 13
This product supersedes Porsche's old part numbers:
99633104506, 99633104508, 99633104510, 99633104512, 99733104504 , 99633104512
What this product does:
• Provides a secure connection between the chassis and wheel hub
• Maintains wheel alignment for safe, predictable handling
• Absorbs suspension forces while keeping steering precise
Over time, control arms can bend, wear, or develop excessive play in the bushings and ball joints. This can cause uneven tire wear, knocking noises, wheel alignment issues, and a noticeable loss of steering precision. Replacement will restore the correct wheel alignment and suspension stability for which your Porsche was designed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733104505
The product you are viewing cross references to these numbers
Product Information
Control arm rear with ball joint. Sold each.The high-quality replacement built to OE specifications, it delivers the same fit, strength, and performance as the original part. This suspension component connects the wheel hub to the chassis, maintaining proper alignment and ensuring stable handling.
Fits:
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster - 2005 to 2012
Porsche 987c Cayman - 2006 to 2012
Porsche 996 C2 / C4 - 1997 to 2005
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3 - 1999 to 2005
Porsche 997 MKI - 2006 to 2009
Porsche 997 GT3 - 2006 to 2009
Diagram ref no 13
This product supersedes Porsche's old part numbers:
99633104506, 99633104508, 99633104510, 99633104512, 99733104504 , 99633104512
What this product does:
• Provides a secure connection between the chassis and wheel hub
• Maintains wheel alignment for safe, predictable handling
• Absorbs suspension forces while keeping steering precise
Over time, control arms can bend, wear, or develop excessive play in the bushings and ball joints. This can cause uneven tire wear, knocking noises, wheel alignment issues, and a noticeable loss of steering precision. Replacement will restore the correct wheel alignment and suspension stability for which your Porsche was designed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733104505
99633104510
99633104512
99733104505
99733104505
99631124508
99633124510
99633104505
99633104507
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£68.00 inc. VAT
Now £61.20 inc. VAT
In Stock - 24 Hour Dispatch
Also found on these pages
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
90037805101
Product Information
Designed for the rear axle control arm on Porsche 996 and 997, it provides exact factory fit, strength, and corrosion resistance.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: Part 90037805109 is superseded by 90037805101
This bolt secures the rear suspension control arm to the wheel carrier or subframe, providing the clamping force needed to maintain accurate suspension alignment and minimize movement under load.
Over years of service, high torque loads, vibration, and exposure to road conditions can weaken or corrode suspension bolts. A compromised bolt may lead to improper alignment, handling instability, or noise under braking and cornering.
When to replaces:
• During control arm replacement, alignment service, or rear suspension rebuilds
• If original bolts show corrosion, stretching, or thread wear
• As part of preventive maintenance when reassembling load-bearing suspension joints
Replacing with Genuine Porsche hardware ensures structural integrity, precise fit, and lasting performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
The product you are viewing cross references to these numbers
Product Information
Rear control arm hexagon head bolt, M 14 X 100. Designed for the rear axle control arm on Porsche 996 and 997, it provides exact factory fit, strength, and corrosion resistance.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: Part 90037805109 is superseded by 90037805101
This bolt secures the rear suspension control arm to the wheel carrier or subframe, providing the clamping force needed to maintain accurate suspension alignment and minimize movement under load.
Over years of service, high torque loads, vibration, and exposure to road conditions can weaken or corrode suspension bolts. A compromised bolt may lead to improper alignment, handling instability, or noise under braking and cornering.
When to replaces:
• During control arm replacement, alignment service, or rear suspension rebuilds
• If original bolts show corrosion, stretching, or thread wear
• As part of preventive maintenance when reassembling load-bearing suspension joints
Replacing with Genuine Porsche hardware ensures structural integrity, precise fit, and lasting performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
90037805101
90037805109
The product you are viewing cross references to these numbers
Price: £13.19 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90037805101/1
Product Information
Built to factory specs for the rear axle control arms on 996 and 997 models, they deliver the fit and strength your high-performance suspension deserves.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: 90037805109, 90037805101
Since the control-arm mounting bolt bears major structural loads and undergoes vibration and torque stress, it can become worn, stretched, corroded or fatigued over time. This reduces its ability to maintain correct alignment and clamping force - potentially resulting in handling issues or component wear. Replacement is especially important when performing rear suspension service, control arm replacement, or alignment work. Installing the correct bolt restores reliable mounting integrity and ensures the rear axle geometry remains stable under load.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
The product you are viewing cross references to these numbers
Product Information
Rear control arm hexagon head bolt, M 14 X 100.Built to factory specs for the rear axle control arms on 996 and 997 models, they deliver the fit and strength your high-performance suspension deserves.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: 90037805109, 90037805101
Since the control-arm mounting bolt bears major structural loads and undergoes vibration and torque stress, it can become worn, stretched, corroded or fatigued over time. This reduces its ability to maintain correct alignment and clamping force - potentially resulting in handling issues or component wear. Replacement is especially important when performing rear suspension service, control arm replacement, or alignment work. Installing the correct bolt restores reliable mounting integrity and ensures the rear axle geometry remains stable under load.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
90037805101
90037805109
The product you are viewing cross references to these numbers
£10.55 inc. VAT
Now £9.49 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
