Carburetor 40mm Porsche 911, 911L, 911T, 911E and 911S  ❭  911108124

Complete 40mm Carburetor Kit for Porsche 911 Engines

Complete kits include pre-jetted and sized carburetors manifolds, linkage, K&N Watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.

Also available 40mm Carburetors Only

Special order product please allow 10 -14 days for delivery

The PMO carburetor was designed from the beginning to be a state-of-the art carburetor. They start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. They use an excellent material and process: A-356 aircraft aluminum and permanent mold casting. Permanent mold casting is a preferred method in the aerospace industry. This compares favorably with conventional carburetors, including Weber, which are die cast pot metal.

Since they designed a larger carburetor from scratch, the air entry and flow is much greater than the three barrel Weber. This is accomplished by having larger main barrels in the throttle body, tapering the top covers and then installing larger diameter velocity stacks of corresponding taper. This maintains the boost from the velocity stacks down to the exact point where it operates on the auxiliary venturis.

Ball Bearing Supported Single Throttle Shaft
Replaceable Idle Air Jets
Float Bowl Sight Glass
Full Range of Venturis, Jets, Emulsion Tubes
Float Bowl & Float Improvements
Two Sizes of Auxiliary Venturis
Heat Treated Aluminum Permanent Mold Castings

NOTE: PMO recommends using their Carburetor Insulator Kit, between the head and the manifold when installing these carburetors. Insulators restrict heat transfer from the head to the carburetor float bowl to prevent percolation. The kit includes insulators for two carburetors, gaskets, and longer stainless steel head studs. When purchasing Carburetor Insulator, Manifold to Head, Kit. Include information of carburetor size, year/type of head, and intake port diameter.

We recommend that upon removing manifolds, simply apply liquid wrench to the base of the stud and let stand for a day or two before attempting to remove the head studs.

PMO CARBURETOR ORDER FORM: CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911108124

The product you are viewing cross references to these numbers