Porsche > 928 (1978-1995) > 928S4 5.0L 1987-92 > Brakes > Performance Brake Hoses >

718 Boxster and Cayman

Brake hoses Braided stainless steel (Set of 4) Front & Rear Porsche 987 / 981 / 718 Boxster and Cayman - 360355191

Rohler

360355191

Product Information

Brake hoses Braided stainless steel (Set of 4) Front & Rear
Braided stainless steel brake hoses are a popular upgrade over traditional rubber brake hoses, especially in performance and heavy usage applications.

Rohler high-performance braided brake lines are constructed with PTFE (Teflon®) tubing covered by woven stainless steel 304 braid. They are tested at pressures far greater than the average master cylinder can exert. The end fitting is produced with steel material, 15A (Q235), surface treatment is Zinc Nickel plating, this can with stand a 1000-hour salt spray test.

Fits:

Porsche Boxster 987 2.7L 2005 -08/08
Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Porsche Boxster 987 MKII 2.9L 2009-2012
Porsche Boxster S 987 MKII 3.4L 2009-2012
Porsche Boxster 981 2.7L 2012-16
Porsche Boxster S 981 3.4L 2012-16
Porsche Boxster Spyder 3.8L 2016
Porsche Boxster 718 2.0L Manual (300 Bhp)
Porsche Boxster 718 2.0L PDK (300 Bhp)
Porsche Boxster S 718 2.5L Manual (350 Bhp)
Porsche Boxster S 718 2.5L PDK (350 Bhp)
Porsche Boxster T 718 2.0L Manual (300 Bhp)
Porsche Boxster T 718 2.0L PDK (300 Bhp)
Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Boxster Spyder 718 4.0L (420 Bhp)
Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
Porsche Cayman 2.7L 987C 2006-08
Porsche Cayman S 3.4L 987C 2005-08
Porsche Cayman 2.9L 987C MKII 2009-12
Porsche Cayman S / R 3.4L 987C MKII 2009-12
Porsche Cayman 2.7L 981 2013-16
Porsche Cayman S 3.4L 981 2013-16 Porsche Cayman GT4 3.8L 2015-16
Porsche Cayman 718 2.0L Manual (300Bhp)
Porsche Cayman 718 2.0L PDK (300Bhp)
Porsche Cayman S 718 2.5L Manual (350Bhp)
Porsche Cayman S 718 2.5L PDK (350Bhp)
Porsche Cayman T 718 2.0L Manual (300Bhp)
Porsche Cayman T 718 2.0L PDK (300 Bhp)
Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L

Reduced Brake Line Expansion: Rubber hoses can swell under high hydraulic pressure and heat, which causes a “spongy” brake pedal feel. Braided stainless steel hoses have an inner Teflon (PTFE) core wrapped in a stainless-steel braid, which prevents expansion. Result: Firmer, more consistent brake pedal feel.

Improved Braking Response: Because the hoses don’t expand, hydraulic pressure is transmitted more efficiently to the calipers. This translates into quicker and more precise braking response.

Enhanced Durability: Stainless steel braid protects the inner Teflon core from abrasion, impacts, and UV damage that can degrade rubber hoses over time. Resistant to chemicals, oil, road debris, and corrosion. Less likely to crack or deteriorate with age compared to rubber.

Longer Service Life: Rubber hoses often need replacement every few years due to aging and cracking. Braided stainless steel hoses last significantly longer, especially if properly maintained.

Better Heat Resistance: Rubber hoses can soften and weaken under extreme heat (such as track use, towing, or mountain driving). Stainless braided hoses handle higher temperatures, reducing the risk of fade or failure.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

360355191

99635513903

98735563701

99635513901

99635513902

99635513900

98735563700

99635513904

98735563107

99135513701

9A761177500

9Y0611775

The product you are viewing cross references to these numbers

Related products

Brake Fluid DOT 4 Brembo Premium Brake Fluid

L040

Product Information

Brake discs, calipers, pads and brake master cylinders are the four cardinal points of each brake system; however, they are likely to be useless without the core of the entire system, the brake fluid. This component is so neglected as to be generally controlled in a summary fashion, with topping instead of a more appropriate replacement, at the change frequency recommended by the manufacturer.
brembo

DOT 4
Having an extremely high boiling point and lower viscosity than required, it meets and greatly exceeds regulatory standards. Also suitable for vehicles with ABS.

Vapour Lock formation
This sort of habit leaves room for the Vapour Lock, the formation of vapour bubbles due to boiling of the brake fluid that replace the normal fluid and are compressed, thereby sending the brake pedal to its fill stoke (spongy pedal). The origin is incident in the porosity of the tubes that make up the braking circuit, which in time draw moisture into the fluid, drastically reducing the boiling point. The result is a reduced braking efficiency.

Brembo Premium Brake Fluid
Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in operating circuit; therefore, preserving its integrity.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

L040

00004320209

00004320366

00004321082

00004330552

The product you are viewing cross references to these numbers

6 6 6 6 6 6

Brake fluid dot 4 Textar

95002

Product Information

Brake fluid DOT 4

textar

Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake.

To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.

Brake fluid should be changed every two years.

The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).

Boiling Point and Viscosity

Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.

Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut.

Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted.

Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.

Find out about Textar product verification here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95002

00004430501

00004321082

00004330552

00004320366

00004320209

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

Brake hoses Braided stainless steel (Set of 4) Front & Rear Porsche 987 / 981 / 718 Boxster and Cayman