Saisissez votre numéro de TVA ici et cliquez sur Vérifier :
Il n'est pas nécessaire de saisir la partie code pays de votre numéro de TVA car elle a déjà été sélectionnée dans votre adresse de facturation ci-dessus.
Vos coordonnées ont été vérifiées. Numéro de TVA enregistré au nom de:
,
.
Votre commande sera désormais détaxée au titre de la TVA. Nous nous réservons le droit de vérifier ces détails une fois votre commande passée et de rétablir la TVA si nécessaire.
Vos données de TVA n'ont pas été reconnues ou n'étaient pas valides. Votre numéro de TVA doit correspondre à votre pays de facturation tel que spécifié ci-dessus. Il est actuellement spécifié comme . Vous n'avez pas besoin de saisir la partie code pays de votre numéro de TVA car elle a déjà été sélectionnée dans les détails de votre adresse de facturation ci-dessus.
Le service de vérification du numéro de TVA est actuellement hors ligne. Veuillez indiquer votre numéro de TVA dans le champ « Commentaires ou instructions spéciales » ci-dessous et nous appliquerons une remise de TVA après avoir passé votre commande.
It’s a suspension rubber mount that fits around the anti-roll bar to secure it to the rear axle and help control chassis movement.
SET OF 2. Two bushings (left and right) are typically required per vehicle.
Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997 - 2005 Cars with Sport Suspension - Please choose by size
Porsche 987.1 Boxster 2005 - 2008 Cars with Sport Suspension
Porsche 996 C2 / C4 / C4S 1998 - 2005 *Cars with Sport Suspension - Please choose by size
Porsche 997.1 C2 / C2S / C4 / C4S 2005 - 2008 - Please choose by size
Diagram Ref No 2.
• Application: Rear anti-roll (stabilizer) bar bushing - fits around the 19.8 mm diameter stabilizer bar to mount it to the rear suspension subframe. Two bushings (left and right) are typically required per vehicle.
The anti-roll bar bushing cushions and secures the stabilizer bar to the rear suspension structure. This part helps maintain the correct position and movement control of the rear anti-roll bar, reducing unwanted body roll in corners and stabilizing the chassis during acceleration, braking, and steering.
Over time, the factory rubber in anti-roll bar bushings can harden, crack, or break down due to heat, age, and load cycles. Worn bushings can lead to:
• Increased body roll and reduced handling precision
• Clunking or knocking noises from the rear suspension
• Uneven tire wear
• Loose or sloppy cornering response
Replacing bushings restores correct fitment and suspension geometry, improving stability, road feel, and overall driving confidence. Spyder Performance
Replace the rear anti-roll bar bushings if you notice:
• Clunking or rattling from the rear suspension
• Excessive body lean when cornering
• Visible cracks, distortion, or missing rubber on existing bushings
• During suspension overhaul or anti-roll bar removal
• Elevated noise or vibration through the rear of the car
Numéros de référence associés
Numéros associés, remplacés, de référence croisée ou alternatifs à des fins de comparaison.
99633379225
Le produit que vous consultez fait référence à ces numéros
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
