Retro Trim

Pepita Porsche Houndstooth classic fabric, Green / White
Width is 1.5 meters 



The fabric is 1,5 m wide and is sold per running metre.
For example:
Buy 1 = 100cm x 150cm = 1.5m2
Buy 2 = 200cm x 150cm = 3.0m2
Buy 5 = 500cm x 150cm = 7.5m2
Buy 8 = 800cm x 150cm = 12 m2

A full roll is 40 meters long x 1.5 meters wide if required 

Pepita Porsche Houndstooth classic fabric, Orange / White
Width is 1.5 meters 



The fabric is 1,5 m wide and is sold per running metre.
For example:
Buy 1 = 100cm x 150cm = 1.5m2
Buy 2 = 200cm x 150cm = 3.0m2
Buy 5 = 500cm x 150cm = 7.5m2
Buy 8 = 800cm x 150cm = 12 m2

A full roll is 40 meters long x 1.5 meters wide if required 

Pepita Porsche Houndstooth classic fabric, Brown / White
Width is 1.5 meters 



The fabric is 1,5 m wide and is sold per running metre.
For example:
Buy 1 = 100cm x 150cm = 1.5m2
Buy 2 = 200cm x 150cm = 3.0m2
Buy 5 = 500cm x 150cm = 7.5m2
Buy 8 = 800cm x 150cm = 12 m2

A full roll is 40 meters long x 1.5 meters wide if required 

Pepita Porsche Houndstooth classic fabric, Black / White
Width is 1.5 meters 



The fabric is 1,5 m wide and is sold per running metre.
For example:
Buy 1 = 100cm x 150cm = 1.5m2
Buy 2 = 200cm x 150cm = 3.0m2
Buy 5 = 500cm x 150cm = 7.5m2
Buy 8 = 800cm x 150cm = 12 m2

A full roll is 40 meters long x 1.5 meters wide if required 

Seat cover and softer foam set.
Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (softer than the factory originals) covered in your desired material and fitting is straightforward.

Some found the factory original foams too hard so we have developed replacement foam sets slightly softer than the factory originals for a more comfortable ride, but still with all the factory details.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat cover and standard foam set. Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.

The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Side bolster protector covers. Porsche 918 fixed bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, it can be a physical challenge climbing in and out, leading to visible scuffing, deep creases in the leather trim and torn stitching.

Here is a solution in the form of its 918 seat bolster protectors.

Once installed over the outside bolsters of both seats, this new-to-market product perfectly replicates the look of the standard bolster due to being made from Porsche factory black Napa leather and deviated stitching in the colour of your choice.
Along with the additional 'cuff cover', these protectors will also shield the rear of the bolster without looking out of place and installation is easy.
Please Note Protector "Cuff" does not have deviated stitching

Sold as a pair - Left and Right seat

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918BOLSTERCVR

The product you are viewing cross references to these numbers

Knee protectors in black vinyl finish



Knee protection strips for Porsche 911 08/1985>> & early 964. This is NOT a re-trim kit but a complete lower dashboard knee protectors, re-manufactured to exact OEM specifications.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115520

The product you are viewing cross references to these numbers

Gearshift lever with leather gaiter. Porsche 964 Carrera 2 / Carrera 4 / turbo



Replace the old warn gearshift gaiter with this new 5-speed gearlever

Fits:
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994
Porsche 964 turbo - 1991 to 1994
Porsche 964 RS - 1991 to 1993

Colours:
Black, Cobalt Blue, Light Grey, Classic Grey and Cashmere Beige

Please allow a min 14 -28 days for delivery for some colours.

Rear 1/4 Inner door top strips available in vinyl or leather. Sold as pair

Fits:
Porsche 911 1972-89 COUPE Cars

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155509X00

The product you are viewing cross references to these numbers

Rear 1/4 window top inner strip for Coupe models. PAIR

Fits:
Porsche 911 1969-71 COUPE

Pair of Rear quarter panel caps (mouldings) to fit on top of the rear quarter panels for Porsche 911 Coupe LWB models, 1969-1971. Available in vinyl or leather.

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509X51

The product you are viewing cross references to these numbers

Upgrade your old, worn shifter assembly with this meticulously handcrafted, high-quality aluminum gear knob and leather gaiter/shift boot, finished with a sleek satin anodisation. Available in a variety of colors.

Fits:
Porsche 993 Carrera 1994-98
Porsche 993 Turbo 1995-98


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GK993TEQ

The product you are viewing cross references to these numbers

Rear quarter panel capping in vinyl or leather. SET OF 2



Fits:
Porsche 911 1967-68 TARGA LHD and RHD Cars

Pair of Rear quarter panel caps (mouldings) to fit on top of the rear quarter panels for Porsche 911 Targa "Soft Window" SWB models, 1967-1968. Available in vinyl and leather.


Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509X40

The product you are viewing cross references to these numbers

Rear quarter panel kit for Porsche 911 Targa from 1967–1973.

Available in Black Porsche Nappa leather or Porsche classic vynil. Comes as ready-to-install panels.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Rear quarter panel kit for Porsche 911 Coupe from 1965–1973.

Available in Black Porsche Nappa leather or Porsche classic vynil. Can be ordered as a retrim kit for you to restore your existing panels or as ready-to-install pieces.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

The retrim kit contains fully trimmed flat panels and material to retrim your existing plastic scoops over the wheel arch. We can also offer the rear quater panels ready-to-install. In this case the flat panels and scoops are fully trimmed and assembled.

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Complete ready-to-install rear quarter panels for Porsche 911 Targa from 1974–1993.

Available forTarga models in Porsche Nappa leather or Porsche classic vinyl, with or without pleated sections.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Delivery Time is Normally 4-6 weeks on this product as this is made to order