Retro Trim

Dashboard Main Section LHD Porsche 911 1964-68 / 912 (Strictly speaking these are for the 1968 models, but can be used 1964-68)

Fits:

Porsche 911 1964-68 LHD CARS ONLY
Porsche 912 1964-68 LHD CARS ONLY

Complete dashboard main section for Porsche 911, 1964 -1968 models with 2-piece dashboards. This is NOT a dashpad or dashcover but a new replacement dashboard, manufactured to exact OEM specifications. Matches Porsche part number 901.552.031.23.

Please note that the forward speaker section of the dashboard, Porsche part number 901.552.021.20 (or 901.552.021.21 for models after February '68) is not included but available separately.

Due to sun exposure '64-'68 dashboards typically have large cracks in the middle. The underlying dashboard cellfoam has often disintegrated, the metal frame has deformed and dashboard mounting screws are rusted out. Dashboards in this state are beyond restoration. In this case we recommend to install our new OEM specification dashboard to finish your 100-point restoration.

Our complete OEM specification dashboards are probably the best you can buy for originality and fit. The tool to mould and cast the dashboards was developed using 3-D scanning on a NOS dashboard. Grain and gloss of the vynil surface coat have been optimised to match the typical patina found on the door caps and knee pads of '65-'68 models. All dashboards are quality assured on a jig to correct/control mounting points. We guarantee a factory authentic appearance and fit.

Installation requires no specific tools and is within the ability of a moderately experienced home mechanic. Please note that installation of the dashboard requires removal of the windshield.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155203101

The product you are viewing cross references to these numbers

Floor mats, Set of 2.
Black with white text on drivers side



Fits:
for RHD cars (right hand drive)
Porsche Boxster 987.1 2005-08
Porsche Boxster 987.2 2009-12

Complete leather restoration kit for the 2 front seats of all Porsche 911 models from 1985-1989 and all 964 models 1989-1993, available for Standard and Sport seats.

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Upon completion of the auction, please state whether you have Standard or Sport seats. Sport seat have higher bolsters. The best way to distinguish is measure the side of the back rest. At the widest point, the Regular seat measures 12.5cm (5") whereas the Sport seat measures 17.5 cm (7").

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Sun Visors Kit Left and Right.
Set of 2 sun visors for Targa / Cabrio Models





Fits:
Porsche 911 1969-89 Targa / Cabrio
Porsche 964 Targa / Cabrio
*Please note these are aftermarket sets with the vanity on the right hand side, mainly used for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91173133001

The product you are viewing cross references to these numbers

Sun Visors Kit Left & Right.
Set of 2 sun visors for cars with Black Head lining





Fits:
Porsche 911 1969-89 COUPE
Porsche 964/ 993 COUPE
*Please note these are aftermarket sets with the vanity on the right hand side, mainly used for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91173133002

The product you are viewing cross references to these numbers

Sun Visors Kit Left & Right.
Set of 2 sun visors for cars with Cream Head lining





Fits:
Porsche 911 1969-89 COUPE
Porsche 964 / 993 COUPE
*Please note these are aftermarket sets with the vanity on the right hand side, mainly used for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91173133000

The product you are viewing cross references to these numbers

Complete front seat restoration kit for the 2 front seats of Porsche 911 1974-1976 (early G models) with standard seats.

Our front seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; original Porsch Nappa leather or classic Porsche Skai with period correct embossed center sections (dimple stripes), top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete leather restoration kit for the 2 front seats of Porsche 911 models 1974-1984 with original Recaro sport seats (pre-SC models, Carrera 3.0, SC and early Turbo models).

The easiest way to distinguish a sport seat from a standard (comfort) seat is to measure the side of the back rest. At the widest point, the comfort seat measures 12.5cm (5") whereas the sport seat measures 17.5 cm (7").

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete leather restoration kit for the 2 front seats of Porsche 911 models 1977-1984 (late pre-SC models, Carrera 3.0, SC and early Carrera 3.2 models), available for Standard and Sport seats.

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Please state whether you have Standard or Sport seats. Sport seat have higher bolsters. The best way to distinguish is to measure the side of the back rest. At the widest point, the Regular seat measures 12.5cm (5") whereas the Sport seat measures 17.5 cm (7").

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911521

The product you are viewing cross references to these numbers

Fits Left Hand Drive cars - LHD

Retrim kit for the facings (midde section) of your dashboard in the original material for all Porsche 911 models 1969 - 1973. Available in black basketweave vinyl ('69-'71) and black plain vinyl ('72-'73) for both LHD and RHD cars.

Installation requires no specific tools and is simple to perform.

Suitable for dashboards with and without radio.

Complete SET OF 4 door pockets for Porsche 911 '69-'73, re manufactured to exact OEM specifications. The kit includes 2 map pockets (front) and 2 tilting pockets (rear), all beautifully engineered and finished to a very high quality. A must to finish your 100-point restoration.

Our ready-to-install door pockets are probably the best you can buy for originality and fit. The tool to mould and cast the door pockets was developed using 3-D scanning on NOS door pockets. The door pockets have a fiberglass rather than cardboard substructure, which guarantees durable structural integrity and water resistance. Grain and gloss of the vinyl surface coat have been optimised to match the typical patina found on the arm rest and door caps of '69-'74 models. The edges are finished with the original polished and anodised aluminum strips with the correct diamond shaped insert. The inside of the door pockets are lined with velvet flocking just like the original. The front pockets have the original rubber molded strip on top.

All reinforcements, slide bolts, fasteners and fittings are like the original. We guarantee a factory authentic appearance and fit.

The door pockets come with step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of a moderately experienced home mechanic.

Please NOTE:
It includes 2 elastic bands, 2 allen bolts (M6), 8 small conic bolts (M4), 2 nuts (M6), 8 rivets and 8 plastic hinges.

For Fitting Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155500011

The product you are viewing cross references to these numbers

Pair of ready-to-install headrests for all Porsche 911 and 912 models from 1966 - 1973 with standard seats, re manufactured to exact OEM specifications. This is NOT a cover, but a complete and beautifully engineered assembly trimmed in Porsche classic Skai or leather as required.

Our headrests are probably the best you can buy for originality and fit. The headrest tilting mechanism is an exact replica of the original Recaro design. The cell foam around the tilting mechanism is molded to the exact same shape and density of the original. We can cover the headrests with the original Porsche Classic Skai or Porsche Nappa leather. This guarantees a perfect match with our front seat restoration kit.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic. Headrests were standard for '72-'73 models but will fit all '66-'73 Recaro comfort seats with headrest guides.

Please make sure your seats are equipped with headrest guides before ordering.

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Springbox reinforcement kit for the 2 front seats of all Porsche 911 and 912 models from 1966 - 1973 with standard seats. Contains 8 high resistance coils, 2 hourse hair panels and correction filling.

The seat base of your Porsche 911 '66-'73 is of the spingbox type. Extensive use and age will cause the coils to loose resistance and break. This reduces the support of the seat and will overstretch your seat covers causing them to tear and crack.

When replacing your front seat covers it is recommended to install our front seat reinforcement kit. It will provide you better ride comfort and increase the life of you new seat covers.

Instructions seat base reinforcement kit

 

·         The springs are to be positioned 3-5cm inward of each corner of the spring box.

·         Short springs are for the back. Long ones go in the front

• You can simply work them in and attached them to the old coils
• The horsehair panels need to be cut to measure (with a breadknife or scissors)
• You can layer the horsehair to pad up the bolsters if needed and glue layers together
• The fine white foam is used a finishing sheet between the horsehair and the seat covers

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete restoration kit for the 2 front seats of all Porsche 911 and 912 models from 1966-1973 with standard seats (OEM specification). This kit is available with plain, basket weave or 'Pepita' (Houndstooth fabric) center section, in Porsche Nappa leather or classic vinyl. Headrests covers (standard for '72-'73 models) are not included in this kit, but can be ordered separately.

The seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Porsche Nappa leather with basketweave embossing for the center sections (if required), colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete OEM specification headlining for all Porsche 911 Coupe models 1965 -1989 & Porsche 964, This headliner is available in white and black (RS specification), for sunroof and non-sunroof models.

Our headlining is probably the best you can buy for fitment. we use perforated heavy grain vinyl. All materials are precision cut, blind stitched and pre-formed to a factory fit.

To order, please state your desired colour (black or white) and whether you have a sunroof or non-sunroof coupe.

Fits:
Porsche 911 1965-89
Porsche 964 1989-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155505515

The product you are viewing cross references to these numbers

Complete ready-to-install door panels for all Porsche 911 models from 1974-1989 and all 964 models 1989-1993 in VINYL (SET OF 2)



Our door panels are among the best you can buy for originality and fit. Matched to Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

To install, simply make openings for the speakers/ accessories and install. Please note that door pockets, arm rest, door panel clips or other panel hardware are not included.

Because of fading of the original material and colour differences between dye lots, we offer the door panels in Black only.

Sold as a Pair Left & Right side

Fits:
Porsche 911 1974-89
Porsche 964

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155503BLKVN

The product you are viewing cross references to these numbers